scholarly journals Melanoma Detection by AFM Indentation of Histological Specimens

2021 ◽  
Author(s):  
ByoungJun Jeon ◽  
Hyo Gi Jung ◽  
Sang Won Lee ◽  
Gyudo Lee ◽  
Jung Hee Shim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Histopathological Analysis ◽  
Anatomical Site ◽  
Cancer Stage ◽  
Gaussian Distributions ◽  
Force Microscopy ◽  
Benign Nevus ◽  
Melanoma Detection ◽  
Afm Indentation ◽  
Atomic Force

Abstract Melanoma is visible unlike other types of cancer, but it is still challenging to diagnose correctly because of the difficulty in distinguishing between benign nevus and melanoma. We conducted a robust investigation of melanoma, identifying considerable differences in local elastic properties between nevus and melanoma tissues by using atomic force microscopy (AFM) indentation of histological specimens. Specifically, the histograms of the elasticity of melanoma displayed multimodal Gaussian distributions, exhibiting the heterogeneous mechanical properties, in contrast with the unimodal distributions of elasticity in the benign nevus. We identified this notable signature was consistent regardless of blotch incidence by sex, age, anatomical site (e.g., thigh, calf, arm, eyelid, and cheek), or cancer stage (I, IV, and V). In addition, we found that the non-linearity of the force-distance curves for melanoma is increased compared to benign nevus. We believe that AFM indentation of histological specimens may technically complement conventional histopathological analysis for earlier and more precise melanoma detection.

scholarly journals Melanoma Detection By AFM Indentation of Histological Specimens

2021 ◽  
Author(s):  
ByoungJun Jeon ◽  
Hyo Gi Jung ◽  
Sang Won Lee ◽  
Gyudo Lee ◽  
Jung Hee Shim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Histopathological Analysis ◽  
Anatomical Site ◽  
Cancer Stage ◽  
Gaussian Distributions ◽  
Force Microscopy ◽  
Benign Nevus ◽  
Melanoma Detection ◽  
Afm Indentation ◽  
Atomic Force

Abstract Melanoma is visible unlike other types of cancer, but it is still challenging to diagnose correctly because of the difficulty in distinguishing between benign nevus and melanoma. We conducted a robust investigation of melanoma, identifying considerable differences in local elastic properties between nevus and melanoma tissues by using atomic force microscopy (AFM) indentation of histological specimens. Specifically, the histograms of the elasticity of melanoma displayed multimodal Gaussian distributions, exhibiting the heterogeneous mechanical properties, in contrast with the unimodal distributions of elasticity in the benign nevus. We identified this notable signature was consistent regardless of blotch incidence by sex, age, anatomical site (e.g., thigh, calf, arm, eyelid, and cheek), or cancer stage (I, IV, and V). In addition, we found that the non-linearity of the force-distance curves for melanoma is increased compared to benign nevus. We believe that AFM indentation of histological specimens may technically complement conventional histopathological analysis for earlier and more precise melanoma detection.

Mechanical Properties of Membrane Surface of Cultured Astrocyte Revealed by Atomic Force Microscopy

2000 ◽  
Vol 39 (Part 1, No. 6B) ◽  
pp. 3711-3716 ◽  
Author(s):  
Hatsuki Shiga ◽  
Yukako Yamane ◽  
Etsuro Ito ◽  
Kazuhiro Abe ◽  
Kazushige Kawabata ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Membrane Surface ◽  
Force Microscopy ◽  
Atomic Force

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

scholarly journals The Infuence of Salicin on Rheological and Film-Forming Properties of Collagen

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1661
Author(s):  
Katarzyna Adamiak ◽  
Katarzyna Lewandowska ◽  
Alina Sionkowska
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Infrared Spectroscopy ◽  
Rheological Properties ◽  
Silver Carp ◽  
Shear Tests ◽  
Force Microscopy ◽  
Atomic Force ◽  
Film Forming ◽  
Potential Applications

Collagen films are widely used as adhesives in medicine and cosmetology. However, its properties require modification. In this work, the influence of salicin on the properties of collagen solution and films was studied. Collagen was extracted from silver carp skin. The rheological properties of collagen solutions with and without salicin were characterized by steady shear tests. Thin collagen films were prepared by solvent evaporation. The structure of films was researched using infrared spectroscopy. The surface properties of films were investigated using Atomic Force Microscopy (AFM). Mechanical properties were measured as well. It was found that the addition of salicin modified the roughness of collagen films and their mechanical and rheological properties. The above-mentioned parameters are very important in potential applications of collagen films containing salicin.

scholarly journals Anisotropic Mechanical Properties of Living Cells Revealed by Integrated Spinning Disk Confocal and Atomic Force Microscopy

2018 ◽  
Vol 114 (3) ◽  
pp. 513a
Author(s):  
Yuri M. Efremov ◽  
Mirian Velay-Lizancos ◽  
Daniel M. Suter ◽  
Pablo D. Zavattieri ◽  
Arvind Raman
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Living Cells ◽  
Force Microscopy ◽  
Atomic Force ◽  
Spinning Disk ◽  
Anisotropic Mechanical Properties

scholarly journals Resolving Structure and Mechanical Properties at the Nanoscale of Viruses with Frequency Modulation Atomic Force Microscopy

PLoS ONE ◽  
2012 ◽  
Vol 7 (1) ◽  
pp. e30204 ◽  
Author(s):  
David Martinez-Martin ◽  
Carolina Carrasco ◽  
Mercedes Hernando-Perez ◽  
Pedro J. de Pablo ◽  
Julio Gomez-Herrero ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Frequency Modulation ◽  
Force Microscopy ◽  
Atomic Force

Material Property Characterization of Costal Cartilage Using AFM Indentation

2009 ◽  
Author(s):  
S. Tripathy ◽  
E. J. Berger
Keyword(s):  
Material Characterization ◽  
Costal Cartilage ◽  
Indentation Modulus ◽  
Hertz Contact ◽  
Force Microscopy ◽  
Afm Indentation ◽  
Atomic Force ◽  
Macro Scale ◽  
Property Characterization

Costal cartilage is one of the load bearing tissues of the rib cage. Literature on the material characterization of the costal cartilage is limited. Atomic force microscopy has been extremely successful in characterizing the elastic properties of articular cartilage, but no studies have been published on costal cartilage. In this study AFM indentations on human costal cartilage were performed and compared with macro scale indentation data. Spherical beaded tips of three sizes were used for the AFM indentations. The Hertz contact model for spherical indenter was used to analyze the data and obtain the Young’s modulus. The costal cartilage was found to be almost linearly elastic till 600 nm of indentation depth. It was also found that the modulus values decreased with the distance from the junction. The modulus values from macro indentations were found to be 2-fold larger than the AFM indentation modulus.

scholarly journals Nanostructural and mechanical changes in the sclera following proteoglycan depletion

2018 ◽  
Vol 2 (2) ◽  
pp. 14-17
Author(s):  
Zhuola Zhuola ◽  
Steve Barrett ◽  
Yalda Ashraf Kharaz ◽  
Riaz Akhtar
Keyword(s):  
Mechanical Properties ◽  
Collagen Fibril ◽  
Enzymatic Degradation ◽  
Ocular Tissues ◽  
Force Microscopy ◽  
Nanomechanical Properties ◽  
Atomic Force ◽  
Fibril Morphology

The mechanical properties of ocular tissues, such as the sclera, have a major impact on healthy eye function, and are governed by the properties and composition of the microstructural components. For example, biomechanical degradation associated with myopia occurs alongside a reduction of proteoglycans (PGs). In this study, the role of PG degradation in the nanomechanical properties of the porcine sclera is explored. In-vitro enzymatic degradation of PGs was conducted with α-amylase and chondroitinase ABC enzymes. Collagen fibril morphology and nanomechanical stiffness were measured with atomic force microscopy (AFM). The elastic modulus of the tissue was reduced in all enzyme-treated samples relative to controls. In addition, collagen fibril organization was disrupted by PG depletion. Our data demonstrate that PGs play an important role in determining not only the mechanical properties at these length scales, but also collagen fibril arrangement.

Sign in / Sign up

Export Citation Format

Share Document