scholarly journals Sizing an open-channel woodchip bioreactor to treat nitrate from agricultural tile-drainage and achieve water quality targets

Author(s):  
Pam Krone ◽  
Ross Clark ◽  
Jason Adelaars ◽  
Mason Leandro ◽  
Alex Henson ◽  
...  

Abstract Woodchip bioreactors are capable of removing nitrate from agricultural runoff and subsurface tile drain water, alleviating human health hazards and harmful discharge to the environment. Water pumped from agricultural tile drain sumps to nearby ditches or channels could be cost effectively diverted through a woodchip bioreactor to remove nitrate prior to discharge into local waterways. Sizing the bioreactor to achieve targeted outlet concentrations within a minimum footprint is important to minimizing cost. Determining the necessary bioreactor size should involve a hydrological component as well as reaction type and rates. We measured inflow and outflow nitrate concentrations in a pumped open-channel woodchip bioreactor over a 13-month period and used a tanks-in-series approach to model hydrology and estimate parameter values for reaction kinetics. Both zero-order and first-order reaction kinetics incorporating the Arrhenius equation for temperature dependence were modeled. The zero-order model fit the data better. The rate coefficients (k = 17.5 g N m−3 day−1 and theta = 1.12 against Tref = 20 °C) can be used for estimating the size of a woodchip bioreactor to treat nitrate in agricultural runoff from farm blocks on California's central coast. We present an Excel model for our tanks-in-series hydrology to aid in estimating bioreactor size.

2008 ◽  
Vol 57 (7) ◽  
pp. 912-920 ◽  
Author(s):  
Paolo Arosio ◽  
Valentina Busini ◽  
Giuseppe Perale ◽  
Davide Moscatelli ◽  
Maurizio Masi

1994 ◽  
Vol 29 (10-11) ◽  
pp. 409-416 ◽  
Author(s):  
F. Çeçen ◽  
I. E. Gönenç

The kinetics of nitrogen removal was studied in upflow submerged nitrification and denitrification filters in series. Nitrification followed first-, half-, and zero-order kinetics. For the half-order range the half-order rate constant was about 0.9gNH4-N1/2m−1/2d−1. The zero-order rate constants for the DO ranges of 2-3 mg/L and 4-5 mg/L were found as 0.47 gNH4-Nm−2d−1 and 1.82 gNH4-Nm−2d−1, respectively. In the zero-order region ammonia removal proceeded as a half-order reaction in oxygen concentration and the half-order rate constants were about 1.4-2.7 gO21/2m−1/2d−1. Nitrite accumulation reached a considerable degree at bulk oxygen to bulk ammonia ratios lower than 5 since the formation of nitrate was inhibited. Similar to nitrification half- and zero-order kinetic regions were also observed in denitrification. The half- and zero-order rate constants for carbon unlimited cases (influent COD/NOx-N>5) were about 0.23 gNOx-N1/2m−1/2d−1 and 1.9 gNOx-Nm−2d−1, respectively. The nitrite produced in the nitrification stage could be reduced in denitrification. The removal kinetics in the presence of nitrite was found to be similar to the kinetics when the influent consisted of nitrate only.


2021 ◽  
Vol 12 ◽  
Author(s):  
Fabio Ibrahim ◽  
Johann-Christoph Münscher ◽  
Philipp Yorck Herzberg

The Impostor-Profile (IPP) is a six-dimensional questionnaire measuring the Impostor Phenomenon facets. This study aims to test (a) the appropriateness of a total score, (b) measurement invariance (MI) between gender, (c) the reliability of the IPP, and (d) the convergent validity of the IPP subscales. The sample consisted of N = 482 individuals (64% female). To identify whether the scales of the IPP form a total score, we compared four models: (1) six correlating subscales, (2) a general factor model, (3) a second-order model with one second-order factor and six first-order factors, and (4) a bifactorial model with six group factors. The bifactorial model obtained the best fit. This supports the assumption of a total impostor score. The inspection of structural validity between gender subgroups showed configural, metric, and partial scalar MI. Factor mean comparisons supported the assumption that females and males differ in latent means of the Impostor Phenomenon expressions. The omega coefficients showed sufficient reliability (≥0.71), except for the subscale Need for Sympathy. Overall, the findings of the bifactor model fit and construct validity support the assumption that the measurement through total expression is meaningful in addition to the theoretically formulated multidimensionality of the Impostor Phenomenon.


2018 ◽  
Vol 18 (5) ◽  
pp. 3249-3268 ◽  
Author(s):  
Federica Sebastiani ◽  
Richard A. Campbell ◽  
Kunal Rastogi ◽  
Christian Pfrang

Abstract. Reactions of the key atmospheric nighttime oxidant NO3 with organic monolayers at the air–water interface are used as proxies for the ageing of organic-coated aqueous aerosols. The surfactant molecules chosen for this study are oleic acid (OA), palmitoleic acid (POA), methyl oleate (MO) and stearic acid (SA) to investigate the effects of chain length, head group and degree of unsaturation on the reaction kinetics and products formed. Fully and partially deuterated surfactants were studied using neutron reflectometry (NR) to determine the reaction kinetics of organic monolayers with NO3 at the air–water interface for the first time. Kinetic modelling allowed us to determine the rate coefficients for the oxidation of OA, POA and MO monolayers to be (2.8±0.7) × 10−8, (2.4±0.5) × 10−8and (3.3±0.6) × 10−8 cm2 molecule−1 s−1 for fitted initial desorption lifetimes of NO3 at the closely packed organic monolayers, τd, NO3, 1, of 8.1±4.0, 16±4.0 and 8.1±3.0 ns, respectively. The approximately doubled desorption lifetime found in the best fit for POA compared to OA and MO is consistent with a more accessible double bond associated with the shorter alkyl chain of POA facilitating initial NO3 attack at the double bond in a closely packed monolayer. The corresponding uptake coefficients for OA, POA and MO were found to be (2.1±0.5) × 10−3, (1.7±0.3) × 10−3 and (2.1±0.4) × 10−3, respectively. For the much slower NO3-initiated oxidation of the saturated surfactant SA we estimated a loss rate of approximately (5±1) × 10−12 cm2 molecule−1 s−1, which we consider to be an upper limit for the reactive loss, and estimated an uptake coefficient of ca. (5±1) × 10−7. Our investigations demonstrate that NO3 will contribute substantially to the processing of unsaturated surfactants at the air–water interface during nighttime given its reactivity is ca. 2 orders of magnitude higher than that of O3. Furthermore, the relative contributions of NO3 and O3 to the oxidative losses vary massively between species that are closely related in structure: NO3 reacts ca. 400 times faster than O3 with the common model surfactant oleic acid, but only ca. 60 times faster with its methyl ester MO. It is therefore necessary to perform a case-by-case assessment of the relative contributions of the different degradation routes for any specific surfactant. The overall impact of NO3 on the fate of saturated surfactants is slightly less clear given the lack of prior kinetic data for comparison, but NO3 is likely to contribute significantly to the loss of saturated species and dominate their loss during nighttime. The retention of the organic character at the air–water interface differs fundamentally between the different surfactant species: the fatty acids studied (OA and POA) form products with a yield of  ∼ 20 % that are stable at the interface while NO3-initiated oxidation of the methyl ester MO rapidly and effectively removes the organic character ( ≤ 3 % surface-active products). The film-forming potential of reaction products in real aerosol is thus likely to depend on the relative proportions of saturated and unsaturated surfactants as well as the head group properties. Atmospheric lifetimes of unsaturated species are much longer than those determined with respect to their reactions at the air–water interface, so they must be protected from oxidative attack, for example, by incorporation into a complex aerosol matrix or in mixed surface films with yet unexplored kinetic behaviour.


2008 ◽  
Vol 147 (3) ◽  
pp. 225-240 ◽  
Author(s):  
M. S. DHANOA ◽  
S. LÓPEZ ◽  
R. SANDERSON ◽  
J. FRANCE

SUMMARYIn the present paper, a simplified procedure using few in situ data points is derived and then evaluated (using a large database) against reference values estimated with the standard nylon bag first-order kinetics model. The procedure proposed involved a two-stage mathematical process, with a statistical prediction of some degradation parameters (such as lag time) and then a kinetic model derived by assuming degradation follows zero-order kinetics to determine effective degradability in the rumen (E). In addition to the estimation of washout fraction and discrete lag, which is common to both procedures, the simplified procedure requires measurement of dry matter losses at one incubation time point only. Thus, interference of the animal rumen will be much reduced, which will lead to increased capacity for feed evaluation. Calibration of the zero-order model against the first-order model showed that suitable estimates of E can be obtained with disappearance at 24, 48 or 72 h as the single incubation end time point. The strength of the calibration is such that an end incubation time point as low as 24 h may be sufficient, which may reduce substantially the total incubation time required and thus the impact on the experimental animal. Relevant regression equations to predict reference values of parameters such as lag time or E are also developed and validated.


Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2899
Author(s):  
Abhinandana Boodi ◽  
Karim Beddiar ◽  
Yassine Amirat ◽  
Mohamed Benbouzid

This paper proposes an approach to develop building dynamic thermal models that are of paramount importance for controller application. In this context, controller requires a low-order, computationally efficient, and accurate models to achieve higher performance. An efficient building model is developed by having proper structural knowledge of low-order model and identifying its parameter values. Simplified low-order systems can be developed using thermal network models using thermal resistances and capacitances. In order to determine the low-order model parameter values, a specific approach is proposed using a stochastic particle swarm optimization. This method provides a significant approximation of the parameters when compared to the reference model whilst allowing low-order model to achieve 40% to 50% computational efficiency than the reference one. Additionally, extensive simulations are carried to evaluate the proposed simplified model with solar radiation and identified model parameters. The developed simplified model is afterward validated with real data from a case study building where the achieved results clearly show a high degree of accuracy compared to the actual data.


2020 ◽  
Author(s):  
Jan-Pascal Boos ◽  
Benjamin-Silas Gilfedder ◽  
Hassan Elagami ◽  
Sven Frei

<p>Although a major part of marine microplastic (MP) pollution originates from rivers and streams, the mechanistic behavior of MP in fluvial systems is only poorly understood. MP enter fluvial systems from e.g. waste water treatment plant (WWTP) effluents, sewer overflows during heavy rain events, agricultural runoff, aerial input/atmospheric fallout, road runoff or via fragmentation of plastic litter. As part of this project we want to investigate the hydrodynamic transport mechanisms that control the behavior and re-distribution of MP in open channel flow and the streambed sediments. Hydrodynamic conditions in open channel flow are represented in an experimental flume environment.  Different porous media materials (e.g. aqua beads, glass beads and sand) are used in the flume experiments to shape typical bed form structures such as riffle-pool sequences, ripples and dunes. The aim of this experimental setup is to create hydrodynamic flow conditions such as hydraulic jumps, low and high flow velocity environments for which the transport and sedimentation behavior of MP can be investigated under realistic conditions. Hydrodynamic flow conditions in the flume are characterized using a Laser-Doppler-Anemometry (LDA) and Particle Image Velocimetry (PIV). Detection and tracking of fluorescent MP-particles in open channel flow and in porous media will be achieved with a fluorescence-camera-system.</p>


1994 ◽  
Vol 34 (7) ◽  
pp. 995 ◽  
Author(s):  
JF Angus ◽  
M Ohnishi ◽  
T Horie ◽  
RL Williams

Complementary field and laboratory studies were conducted to determine whether laboratory measurements of net nitrogen (N) mineralisation under anaerobic conditions could be used to predict field rates in a flooded soil and N uptake by a rice crop. The laboratory experiment consisted of measurements of ammonium accumulation at 10, 20, 30, and 40�C for 7, 14, and 28 days of anaerobic incubation. There was no accumulation of ammonium at 10�C, but increasing ammonification rate at temperatures of 20�C was observed, except for a slower rate at 40�C after 14 days. Two models were tested on the data: a zero-order reaction in which rate of mineralisation was a linear function of temperature; a first-order reaction in which net N mineralisation rate was a proportion of a depleting pool of labile organic N. In the second model, the rate was also linearly related to temperature. Both models fitted the laboratory data well (R2 = 0.94 and 0.97, respectively), but the second model accounted better for mineralisation at 40�C for the 28-day incubation. These models were then run, using daily mean temperatures over a rice-growing season, to predict net mineralisation in the field. The predictions were compared with measured net N mineralisation in a flooded soil and N uptake by the crop measured throughout the season in the field from which the incubated soil was sampled. Net N mineralisation and crop uptake increased throughout the season, reaching maximum values of 115 and 111 kg N/ha at maturity. The zero-order and first-order models both predicted net N mineralisation accurately until the middle of the season, after which the zero-order model overestimated net N mineralisation but the first-order model predicted the reduction in the rate of net N mineralisation with reasonable accuracy. The close agreement between the laboratory incubations and field measurements of net mineralisation and crop N uptake suggest that incubation tests may provide useful information for including in a model to assist rice growers' decisions about N fertiliser.


Sign in / Sign up

Export Citation Format

Share Document