Novel Herbal Topical Patch Containing Curcumin and Arnica montana for the Treatment of Osteoarthritis

2020 ◽  
Vol 16 (1) ◽  
pp. 43-60 ◽  
Author(s):  
Priyanka Kriplani ◽  
Kumar Guarve ◽  
Uttam Singh Baghel
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Analgesic Activity ◽  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
World Population ◽  
Jojoba Oil ◽  
Arnica Montana ◽  
Transdermal Patches

Background: Osteoarthritis (OA) ranks fifth among all forms of disability affecting 10% of the world population. Current treatments available are associated with multiple side effects and do not slow down the progression of the disease. Moreover, no such effective treatment is available to date in various systems of medicine to treat osteoarthritis. Curcumin and Arnica have shown evident clinical advances in the treatment of osteoarthritis. Objective: The aim of the present study was to design, optimize and characterize novel herbal transdermal patches of curcumin and Arnica montana using factorial design. Methods: A multiple factorial design was employed to investigate the effect of hydroxypropyl methyl cellulose, ethyl cellulose and jojoba oil on elongation and drug release. Transdermal patches were evaluated by FTIR, DSC, FESEM, ex vivo drug permeation, anti osteoarthritic activity and analgesic activity. Results: Independent variables exhibited a significant effect on the physicochemical properties of the prepared formulations. The higher values of drug release and elongation were observed with the higher concentration of hydroxypropyl methylcellulose and jojoba oil. Anti osteoarthritic activity was assessed by complete Freund's adjuvant arthritis model; using rats and analgesic activity by Eddy's hot plate method, using mice. Combination patch exhibited good anti osteoarthritic and analgesic activity as compare to individual drug patches. Conclusion: The design results revealed that the combination patch exhibited good physicochemical, anti osteoarthritic and analgesic activity for the treatment of osteoarthritis in animals. More plants and their combinations should be explored to get reliable, safe and effective formulations that can compete with synthetic drugs.

scholarly journals Ethyl Cellulose and Hydroxypropyl Methyl Cellulose Blended Methotrexate-Loaded Transdermal Patches: In Vitro and Ex Vivo

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3455
Author(s):  
Muhammad Shahid Latif ◽  
Abul Kalam Azad ◽  
Asif Nawaz ◽  
Sheikh Abdur Rashid ◽  
Md. Habibur Rahman ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Transdermal Patches ◽  
Percent Moisture ◽  
Vitro Release

Transdermal drug delivery systems (TDDSs) have become innovative, fascinating drug delivery methods intended for skin application to achieve systemic effects. TDDSs overcome the drawbacks associated with oral and parenteral routes of drug administration. The current investigation aimed to design, evaluate and optimize methotrexate (MTX)-loaded transdermal-type patches having ethyl cellulose (EC) and hydroxypropyl methyl cellulose (HPMC) at different concentrations for the local management of psoriasis. In vitro release and ex vivo permeation studies were carried out for the formulated patches. Various formulations (F1–F9) were developed using different concentrations of HPMC and EC. The F1 formulation having a 1:1 polymer concentration ratio served as the control formulation. ATR–FTIR analysis was performed to study drug–polymer interactions, and it was found that the drug and polymers were compatible with each other. The formulated patches were further investigated for their physicochemical parameters, in vitro release and ex vivo diffusion characteristics. Different parameters, such as surface pH, physical appearance, thickness, weight uniformity, percent moisture absorption, percent moisture loss, folding endurance, skin irritation, stability and drug content uniformity, were studied. From the hydrophilic mixture, it was observed that viscosity has a direct influence on drug release. Among all formulated patches, the F5 formulation exhibited 82.71% drug release in a sustained-release fashion and followed an anomalous non-Fickian diffusion. The permeation data of the F5 formulation exhibited about a 36.55% cumulative amount of percent drug permeated. The skin showed high retention for the F5 formulation (15.1%). The stability study indicated that all prepared formulations had very good stability for a period of 180 days. Therefore, it was concluded from the present study that methotrexate-loaded transdermal patches with EC and HPMC as polymers at different concentrations suit TDDSs ideally and improve patient compliance for the local management of psoriasis.

3 (2) Factorial Design Assisted Crushed Puffed Rice-HPMC-Chitosan based Hydrodynamically Balanced System of Metoprolol Succinate

2020 ◽  
Vol 10 (3) ◽  
pp. 237-249
Author(s):  
Shashank Soni ◽  
Veerma Ram ◽  
Anurag Verma
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Hydroxypropyl Methylcellulose ◽  
Batch Size ◽  
Metoprolol Succinate ◽  
Zero Order Kinetics ◽  
Two Factors ◽  
Puffed Rice ◽  
Model Drug

Introduction: Hydrodynamically balanced system (HBS) possesses prolonged and continuous delivery of the drug to the gastrointestinal tract which improves the rate and extent of medications that have a narrow absorption window. The objective of this work was to develop a Hydrodynamically Balanced System (HBS) of Metoprolol Succinate (MS) as a model drug for sustained stomach specific delivery. Materials and Methods: Experimental batches were designed according to 3(2) Taguchi factorial design. A total of 9 batches were prepared for batch size 100 capsules each. Formulations were prepared by physically blending MS with polymers followed by encapsulation into hard gelatin capsule shell of size 0. Polymers used were Low Molecular Weight Chitosan (LMWCH), Crushed Puffed Rice (CPR), and Hydroxypropyl Methylcellulose K15 M (HPMC K15M). Two factors used were buoyancy time (Y1) and time taken for 60% drug release (T60%; Y2). Results: The drug excipient interaction studies were performed by the thermal analysis method which depicts that no drug excipient interaction occurs. In vitro buoyancy studies and drug release studies revealed the efficacy of HBS to remain gastro retentive for a prolonged period and concurrently sustained the release of MS in highly acidic medium. All formulations followed zero-order kinetics. Conclusion: Developed HBS of MS with hydrogel-forming polymers could be an ideal delivery system for sustained stomach specific delivery and would be useful for the cardiac patients where the prolonged therapeutic action is required.

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals EFFECT OF POLYMERS ON THE PHYSICOCHEMICAL AND DRUG RELEASE PROPERTIES OF TRANSDERMAL PATCHES OF ATENOLOL

2018 ◽  
Vol 10 (4) ◽  
pp. 68
Author(s):  
Manish Kumar ◽  
Vishal Trivedi ◽  
Ajay Kumar Shukla ◽  
Suresh Kumar Dev
Keyword(s):  
Drug Release ◽  
Hydroxypropyl Methylcellulose ◽  
Research Work ◽  
High Moisture ◽  
Transdermal Drug Delivery System ◽  
Permeable Membrane ◽  
Transdermal Patches ◽  
Egg Membrane ◽  
Hydrophilicity And Hydrophobicity

Objective: The objective of this research work was to develop a transdermal drug delivery system containing atenolol with different ratios of hydrophilic and hydrophobic polymeric combinations, using solvent evaporation technique and to examine the effect of hydrophilicity and hydrophobicity of polymers on the physicochemical and drug release properties of transdermal patches.Methods: Solvent casting method has been used to formulate transdermal patches. Hydroxypropyl methylcellulose (HPMC), Polyvinylpyrrolidone (PVP), Ethylcellulose (EC) in different combination ratios were used as the polymer. Propylene glycol was used as a plasticizer. Permeation enhancers such as span 80 were used to enhance permeation through the skin. In vitro diffusion study was carried out by franz diffusion cell using egg membrane as a semi-permeable membrane for diffusion.Results: Result showed that the thickness of the all batch of patches varied from 0.32 to 0.39 mm with uniformity of thickness in each formulation. Formulations F1 to F3 had high moisture content varied from 2.07±0.09 to 2.56±0.15 and high moisture uptake value varied from 3.21±0.35 to 4.09±0.38, due to a higher concentration of hydrophilic polymers. Drug content of all batches was ranged between 85.92±1.32 to 95.71±1.42. Folding endurance values off all batches were more than 75. Formulation batches F1 to F3 showed higher cumulative drug release varied from 61.34% to 68.11% as compared to formulation batches F4 to F6.Conclusion: Higher proportion of hydrophilic polymer in the formulation of transdermal patches, gives higher percentage drug release from prepared patches. The finding of the study indicates that hydrophilicity and hydrophobicity of polymer effects the physicochemical and drug release properties of transdermal patches and an optimum proportion of hydrophilic and hydrophobic polymer is required for the preparation of effective transdermal patches. 

scholarly journals Development and evaluation of miconazole mucoadhesive tablets for oropharyngeal candidiasis

2017 ◽  
Vol 16 (10) ◽  
pp. 2325-2330
Author(s):  
Qiong Jin ◽  
Wei Chen ◽  
Wan Wu
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Hydroxypropyl Methylcellulose ◽  
Extended Period ◽  
Content Uniformity ◽  
Oropharyngeal Candidiasis ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Mucoadhesive Tablets

Purpose: To develop mucoadhesive tablets containing miconazole (MCZ) for the treatment of oropharyngeal candidiasis, using chitosan and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers.Methods: Mucoadhesive tablets were formulated and optimized using a 23 factorial design and direct compression method. The independent variables were compression force and concentrations of chitosan and HPMC, while mucoadhesion time and in vitro drug release were dependent variables. Tablet characterization was carried out by evaluating hardness, thickness, tablet weight variation, content uniformity, friability and in vitro drug release at salivary pH (pH 6.8).Results: The tablets showed good mucoadhesion for an extended period (8 h), and their physical characteristics were within acceptable ranges. Drug release ranged from 60.5 % to 80.8 %.Conclusion: These results indicate that the mucoadhesive MCZ tablets formulated with chitosan and HPMC possess potential for the development of therapeutic preparations for management of oropharyngeal candidiasis.Keywords: Miconazole, Oropharyngeal candidiasis, Factorial design, Mucoadhesion, Chitosan, Drug release

scholarly journals Optimization of ThermoreversibleIn SituNasal Gel of Timolol Maleate

Scientifica ◽  
2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Swati Jagdale ◽  
Nirupama Shewale ◽  
Bhanudas S. Kuchekar
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Ex Vivo ◽  
Nasal Delivery ◽  
Poloxamer 407 ◽  
Timolol Maleate ◽  
First Pass Metabolism ◽  
First Pass ◽  
Pass Metabolism

Nasal route had shown better systemic bioavailability due to its large surface area, porous endothelial membrane, high total blood flow, and avoidance of first-pass metabolism. Timolol maleate is a beta blocker used primarily in the treatment of hypertension. Drug undergoes extensive hepatic first-pass metabolism (80%). The drug has half-life of 4 hrs. Oral bioavailability of timolol maleate is 61%. The aim of the present study was to optimize controlled releasein situnasal delivery for timolol maleate. HPMC and Poloxamer 407 were selected as polymer in formulation of thermoreversiblein situnasal gel. Optimization was carried out using 32factorial design. It was observed that formulations f1 and f4 revealed the highest % drug release, that is, 93.57% and 91.66%, respectively. Factorial design study indicated that the drug release and viscosity were most significant dependent factors.Ex vivodiffusion study through nasal mucosa indicated 67.26 ± 2.10% and 61.07 ± 2.49% drug release for f1 and f4 formulations. f1 was the optimized batch. This batch thus can act as a potential nasal delivery with enhanced bioavailability for the drug.

Formulation and In vitro Evaluation of Gastroretentive Floating Bioadhesive Tablets of Nizatidine using Factorial Design

2019 ◽  
Vol 9 (3) ◽  
pp. 234-239
Author(s):  
Vidya Sabale ◽  
Hardikkumar Chaudhari ◽  
Prafulla Sabale
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Methyl Cellulose ◽  
Lag Time ◽  
Content Uniformity ◽  
H2 Receptor Antagonist ◽  
Drug Release Profile ◽  
Drug Content ◽  
Weight Variation ◽  
Carbopol 934P

Background: The aim of the present study was to formulate and evaluate floating bioadhesive tablets of Nizatidine which is a competitive, reversible H2-receptor antagonist. Floatingbioadhesive drug delivery system exhibiting a unique combination of floatation and bioadhesion to prolong gastric residence time was prepared. Methods: Polymers used were Hydroxy Propyl Methyl Cellulose (HPMC) K15M as matrix forming water swellable release retarding polymer and carbopol 934P as bioadhesive polymer. The gas generating agents used were sodium bicarbonate and citric acid. The prepared floating bioadhesive tablets of Nizatidine were optimized by 32 factorial design to study independent variable X1 (concentration of CP 934P) and X2 (concentration of HPMC K15M) and dependent variables as floating lag time, cumulative percentage drug release at 12h and swelling index. Tablets were evaluated for various parameters such as hardness, friability, drug content, swelling behavior, floating lag time, bioadhesive strength, drug release profile and stability. Results: All the formulations passed the test for weight variation, hardness, content uniformity and showed acceptable results with respect to drug content (97.93 ± 0.57) and % friability. The tablet containing 25% HPMC K15M and 13.75 % Carbopol 934P was selected as optimized formulation which showed the floating lag time of 74.34±2.08 seconds, drug release of 97.03±0.55% at 12 h (R12h,%), S.I as 79.24±0.87 at 9 h and bioadhesive strength as 10.0023±21.47 g. Stability of the formulation was proved using stability study. Conclusion: The formulated tablets have a potential for controlled release of the drug through floatation and bioadhesion.

scholarly journals Polymeric Inserts Containing Eudragit® L100 Nanoparticle for Improved Ocular Delivery of Azithromycin

Biomedicines ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 466
Author(s):  
Shiva Taghe ◽  
Shahla Mirzaeei ◽  
Raid G. Alany ◽  
Ali Nokhodchi
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Hydroxypropyl Methylcellulose ◽  
Entrapment Efficiency ◽  
Hydroxyethyl Cellulose ◽  
Burst Release ◽  
Ocular Delivery ◽  
Sustained Drug Release ◽  
Diffusion Technique ◽  
Drug Solution

Polymeric inserts containing azithromycin-loaded Eudragit® L100 nanoparticles were developed to sustain the drug release and enhance its ocular performance. The solvent diffusion technique was employed to prepare nanoparticles. The developed nanoparticles (NPs) were fully characterized and investigated. The solvent casting method was used to prepare azithromycin ocular inserts (azithromycin, AZM film) by adding hydroxypropyl methylcellulose (HPMC) or hydroxyethyl cellulose (HEC) solutions after the incorporation of AZM-loaded Eudragit® L100 nanoparticles into plasticized PVA (polyvinyl alcohol) solutions. The optimized nanoparticles had a particle size of 78.06 ± 2.3 nm, zeta potential around −2.45 ± 0.69 mV, polydispersity index around 0.179 ± 0.007, and entrapment efficiency 62.167 ± 0.07%. The prepared inserts exhibited an antibacterial effect on Staphylococcus aureus and Escherichia coli cultures. The inserts containing AZM-loaded nanoparticles showed a burst release during the initial hours, followed by a sustained drug release pattern. Higher cumulative corneal permeations from AZM films were observed for the optimized formulation compared to the drug solution in the ex-vivo trans-corneal study. In comparison to the AZM solution, the inserts significantly prolonged the release of AZM in rabbit eyes (121 h). The mucoadhesive inserts containing azithromycin-loaded Eudragit® L100 nanoparticles offer a promising approach for the ocular delivery of azithromycin (antibacterial and anti-inflammatory) to treat ocular infections that require a prolonged drug delivery.

scholarly journals Chlorhexidine Mucoadhesive Buccal Tablets: The Impact of Formulation Design on Drug Delivery and Release Kinetics Using Conventional and Novel Dissolution Methods

2021 ◽  
Vol 14 (6) ◽  
pp. 493
Author(s):  
Enas Al-Ani ◽  
David Hill ◽  
Khalid Doudin
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Poloxamer 407 ◽  
Oropharyngeal Candidiasis ◽  
Scanning Calorimetry ◽  
Buccal Tablets ◽  
The Impact

Oropharyngeal candidiasis (OPC) is a mucosal infection caused by Candida spp., and it is common among the immunocompromised. This condition is mainly treated using oral antifungals. Chlorhexidine (CHD) is a fungicidal and is available as a mouth wash and oral gel. It is used as an adjuvant in the treatment of OPC due to the low residence time of the current formulations. In this study, its activity was tested against C. albicans biofilm and biocompatibility with the HEK293 human cell line. Then, it was formulated as mucoadhesive hydrogel buccal tablets to extend its activity. Different ratios of hydroxypropyl methylcellulose (HPMC), poloxamer 407 (P407), and three different types of polyols were used to prepare the tablets, which were then investigated for their physicochemical properties, ex vivo mucoadhesion, drug release profiles, and the kinetics of drug release. The release was performed using Apparatus I and a controlled flow rate (CFR) method. The results show that CHD is biocompatible and effective against Candida biofilm at a concentration of 20 µg/mL. No drug excipient interaction was observed through differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR). The increase in P407 and polyol ratios showed a decrease in the swelling index and an increase in CHD in vitro release. The release of CHD from the selected formulations was 86–92%. The results suggest that chlorhexidine tablets are a possible candidate for the treatment of oropharyngeal candidiasis.

Sign in / Sign up

Export Citation Format

Share Document