RNN-based Fault Detection Method for MMC Photovoltaic Grid-connected System

Author(s):  
Yuqi Pang ◽  
Gang Ma ◽  
Xiaotian Xu ◽  
Xunyu Liu ◽  
Xinyuan Zhang

Background: Fast and reliable fault detection methods are the main technical challenges faced by photovoltaic grid-connected systems through modular multilevel converters (MMC) during the development. Objective: Existing fault detection methods have many problems, such as the inability of non-linear elements to form accurate analytical expressions, the difficulty of setting protection thresholds and the long detection time. Method: Aiming at the problems above, this paper proposes a rapid fault detection method for photovoltaic grid-connected systems based on Recurrent Neural Network (RNN). Results: The phase-to-mode transformation is used to extract the fault feature quantity to get the RNN input data. The hidden layer unit of the RNN is trained through a large amount of simulation data, and the opening instruction is given to the DC circuit breaker. Conclusion: The simulation verification results show that the proposed fault detection method has the advantage of faster detection speed without difficulties in setting and complicated calculation.

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 122
Author(s):  
Yang Li ◽  
Fangyuan Ma ◽  
Cheng Ji ◽  
Jingde Wang ◽  
Wei Sun

Feature extraction plays a key role in fault detection methods. Most existing methods focus on comprehensive and accurate feature extraction of normal operation data to achieve better detection performance. However, discriminative features based on historical fault data are usually ignored. Aiming at this point, a global-local marginal discriminant preserving projection (GLMDPP) method is proposed for feature extraction. Considering its comprehensive consideration of global and local features, global-local preserving projection (GLPP) is used to extract the inherent feature of the data. Then, multiple marginal fisher analysis (MMFA) is introduced to extract the discriminative feature, which can better separate normal data from fault data. On the basis of fisher framework, GLPP and MMFA are integrated to extract inherent and discriminative features of the data simultaneously. Furthermore, fault detection methods based on GLMDPP are constructed and applied to the Tennessee Eastman (TE) process. Compared with the PCA and GLPP method, the effectiveness of the proposed method in fault detection is validated with the result of TE process.


Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 323 ◽  
Author(s):  
Qiwei Lu ◽  
Zeyu Ye ◽  
Yilei Zhang ◽  
Tao Wang ◽  
Zhixuan Gao

Owing to the shortcomings of existing series arc fault detection methods, based on a summary of arc volt–ampere characteristics, the change rule of the line current and the relationship between the voltage and current are deeply analyzed and theoretically explained under different loads when series arc faults occur. A series arc fault detection method is proposed, and the software flowchart and principles of the applied hardware implementation are given. Finally, a prototype of an arc fault detection device (AFDD) with a rated voltage of 220 V and a rated current of 40 A is developed. The prototype was tested according to experimental methods provided by the Chinese national standard, GB/T 31143-2014. The experimental results show that the proposed detection method is simple and practical, and can be implemented using a low-cost microprocessor. The proposed method will provide good theoretical guidance in promoting the research and development of an AFDD.


Sign in / Sign up

Export Citation Format

Share Document