scholarly journals Development and Optimization of Floating Microspheres in Amethopterin

2021 ◽  
Vol 14 (4) ◽  
pp. 1538-1543
Author(s):  
Raghav Mishra
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Patient Compliance ◽  
Drug Loading ◽  
Practical Significance ◽  
In Vitro Dissolution ◽  
Minimal Risk ◽  
Gastric Residence Time

Due to the complexity of gastric emptying, as well as its considerable variability, the in vivo efficacy of drug delivery devices cannot be predicted. When it pertains to drugs with an absorption window in the upper small intestine, a controlled drug delivery system with a longer residence period in the stomach may be of considerable practical significance. Recent developments have shown that floating microspheres are particularly well suited for mixing sustained and delayed releases to achieve a variety of release models with a minimal risk of dumping. The aim of present investigation is to develop and analyze the floating microspheres of amethopterin, which after oral administration could increase the gastric residence time and enhance the bioavailability of the drug by sustained release and minimize the dose dependent side effects as well as improves patient compliance. Floating microspheres of ethyl cellulose, Polyvinyl alcohol and polyvinyl pyrrolidone-K90 were formulated by emulsification solvent evaporation technique. The various parameters of prepared microspheres were studied for SEM, flow properties, buoyancy, yield, percent drug loading, in vitro dissolution studies, stability in different pH and FTIR studies. Microspheres prepared with different concentrations of polymers were spherical in shape with smooth surface. The size of microspheres was in range of 256.02 µm and 362.84 µm. Good drug entrapment and buoyancy were observed for formulation F2. The in vitro drug release after 6h was found to be in range from 58.15% to 96.28%. It was established that the newly created floating microspheres of Amethopterin provide an appropriate and practical solution for the sustained release of medication over a longer period of time, resulting in increased oral bioavailability, effectiveness, as well as better patient compliance.

scholarly journals Long-Acting Risperidone Dual Control System: Preparation, Characterization and Evaluation In Vitro and In Vivo

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1210
Author(s):  
Xieguo Yan ◽  
Shiqiang Wang ◽  
Kaoxiang Sun
Keyword(s):  
Drug Loading ◽  
Entrapment Efficiency ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
In Vivo Evaluation ◽  
Long Term Treatment ◽  
Long Acting

Schizophrenia, a psychiatric disorder, requires long-term treatment; however, large fluctuations in blood drug concentration increase the risk of adverse reactions. We prepared a long-term risperidone (RIS) implantation system that can stabilize RIS release and established in-vitro and in-vivo evaluation systems. Cumulative release, drug loading, and entrapment efficiency were used as evaluation indicators to evaluate the effects of different pore formers, polymer ratios, porogen concentrations, and oil–water ratios on a RIS implant (RIS-IM). We also built a mathematical model to identify the optimized formulation by stepwise regression. We also assessed the crystalline changes, residual solvents, solubility and stability after sterilization, in-vivo polymer degradation, pharmacokinetics, and tissue inflammation in the case of the optimized formulation. The surface of the optimized RIS microspheres was small and hollow with 134.4 ± 3.5 µm particle size, 1.60 SPAN, 46.7% ± 2.3% implant drug loading, and 93.4% entrapment efficiency. The in-vitro dissolution behavior of RIS-IM had zero-order kinetics and stable blood concentration; no lag time was released for over three months. Furthermore, the RIS-IM was not only non-irritating to tissues but also had good biocompatibility and product stability. Long-acting RIS-IMs with microspheres and film coatings can provide a new avenue for treating schizophrenia.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

A Smart Drug Delivery System Based on Thermo-Responsive Polymer Gated Au NRs@SiO2 Nano-Platform

2021 ◽  
Vol 16 (7) ◽  
pp. 1029-1036
Author(s):  
Hongzhu Wang ◽  
Mengxun Chen ◽  
Liping Song ◽  
Youju Huang
Keyword(s):  
Drug Delivery ◽  
Block Copolymer ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Photothermal Therapy ◽  
Drug Loading ◽  
Temperature Sensitive

A key challenge for nanoparticles-based drug delivery system is to achieve manageable drug release in tumour cell. In this study, a versatile system combining photothermal therapy and controllable drug release for tumour cells using temperature-sensitive block copolymer coupled Au NRs@SiO2 is reported. While the Au NRs serve as hyperthermal agent and the mesoporous silica was used to improve the drug loading and decrease biotoxicity. The block copolymer acted as “gatekeeper” to regulate the release of model drug (Doxorubicin hydrochloride, DOX). Through in vivo and in vitro experiments, we achieved the truly controllable drug release and photothermal therapy with the collaborative effect of the three constituents of the nanocomposites. The reported nanocomposites pave the way to high-performance controllable drug release and photothermal therapy system.

Floating Microsphere of Curcumin as Targeted Gastro-retentive Drug Delivery System

2021 ◽  
pp. 5202-5206
Author(s):  
Anupam K Sachan ◽  
Saurabh Singh ◽  
Kiran Kumari ◽  
Pratibha Devi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Synthetic Polymers ◽  
Drug Bioavailability ◽  
Gastric Residence Time

Microspheres carrier system made from natural or synthetic polymers used in sustained release drug delivery system. The present study involves formulation and evaluation of floating microspheres of Curcumin for improving the drug bioavailability by prolongation gastric residence time. Curcumin, natural hypoglycemic agent is a lipophilic drug, absorbed poorly from the stomach, quickly eliminated and having short half-life so suitable to formulate floating drug delivery system for sustained release. Floating microspheres of curcumin were formulated by solvent evaporation technique using ethanol and dichloromethane (1:1) as organic solvent and incorporating various synthetic polymers as coating polymer, sustain release polymers and floating agent. The final formulation were evaluated various parameters such as compatibility studies, micrometric properties, In-vitro drug release and % buoyancy. FTIR studies showed that there were no interaction between drug and excipients. The surface morphology studies by SEM confirmed their spherical and smooth surface. The mean particles size were found to be 416-618µm, practical yield of microspheres was in the range of 60.21±0.052% - 80.87±0.043%, drug entrapment efficiency 47.4±0.065% - 77.9±0.036% and % buoyancy 62,24±0.161% - 88.63±0.413%. Result show that entraptmency increased as polymer (Eudragit RS100) conc. Increased. The drug release after 12 hrs. was 72.13% - 87.13% and it decrease as a polymer (HPMC, EC) concentration was decrease.

scholarly journals GASTRORETENTIVE DRUG DELIVERY SYSTEMS: FROM CONCEPTION TO COMMERCIAL SUCCESS

2017 ◽  
Vol 4 (2) ◽  
pp. 10 ◽  
Author(s):  
Harshil P. Shah ◽  
Shailesh T. Prajapati ◽  
C. N. Patel
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Oral Route ◽  
Delivery Systems ◽  
Present Review ◽  
Gastric Residence Time ◽  
In Vivo Characterization ◽  
Absorption Window

Despite the extensive advancements in the field of drug delivery, the oral route remains the favorable route for administration of therapeutic actives. A success of oral controlled drug delivery systems is associated with reduced dosing frequency, decreased fluctuation in plasma drug concentration profile along with improved patient compliance. However, they are also associated with challenges like shorter gastric residence time, unpredictable gastric emptying and poor bioavailability for some molecules. This has initiated tremendous advancements in the field of gastro-retention to achieve controlled release of drugs along with improved bioavailability of drugs with narrow absorption window as well as localized action in the stomach and upper part of GIT. In present review, efforts have been envisaged to summarize our current understanding in the field of gastro-retention and their in vitro as well as in vivo characterization. Present review also highlights commercially utilized gastro-retentive technologies and some recently granted US patents in the field of GRDDS.

scholarly journals FORMULATION OF NANOPARTICLES OF TELMISARTAN INCORPORATED IN CARBOXYMETHYLCHITOSAN FOR THE BETTER DRUG DELIVERY AND ENHANCED BIOAVAILABILITY

2017 ◽  
Vol 10 (9) ◽  
pp. 236
Author(s):  
Upasana Yadav ◽  
Angshuman Ray Chowdhuri ◽  
Sumanta Kumar Sahu ◽  
Nuzhat Husain ◽  
Qamar Rehman
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Targeted Delivery ◽  
Drug Loading ◽  
Water Soluble ◽  
Bioavailability Enhancement ◽  
Water Soluble Drug ◽  
Efficient Option

  Objective: In this study, we have made an attempt to the developed formulation of nanoparticles (NPs) of telmisartan (TLM) incorporated in carboxymethyl chitosan (CMCS) for the better drug delivery and enhanced bioavailability.Materials and Methods: The NPs size and morphology were investigated by high-resolution transmission electron microscopy and field emission scanning electron microscopy, respectively. The crystal structures and surface functional groups were analyzed using X-ray diffraction pattern, and Fourier transform infrared spectroscopy, respectively.Results: To increase the solubility of TLM by targeted delivery of the drug through polymeric NPs is an alternative efficient, option for increasing the solubility. TLM nanosuspension powders were successfully formulated for dissolution and bioavailability enhancement of the drug. We focused on evaluating the influence of particle size and crystalline state on the in vitro and in vivo performance of TLM.Conclusion: In summary, we have developed a new approach toward the delivery of poorly water-soluble drug TLM by CMCS NPs. The particles having a good drug loading content and drug encapsulation efficiency. The cytotoxicity of the synthesized NPs is also very less.

scholarly journals Thermosensitive Chitosan Hydrogels Containing Polymeric Microspheres for Vaginal Drug Delivery

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Ting-Ting Yang ◽  
Yuan-Zheng Cheng ◽  
Meng Qin ◽  
Yong-Hong Wang ◽  
Hong-Li Yu ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Delivery System ◽  
Drug Loading ◽  
Great Promise ◽  
Burst Release ◽  
Bletilla Striata ◽  
Vaginal Drug Delivery ◽  
Thermosensitive Hydrogels

Thermosensitive hydrogels have increasingly received considerable attention for local drug delivery based on many advantages. However, burst release of drugs is becoming a critical challenge when the hydrogels are employed. Microspheres- (MS-) loaded thermosensitive hydrogels were thus fabricated to address this limitation. Employing an orthogonal design, the spray-dried operations of tenofovir (TFV)/Bletilla striata polysaccharide (BSP)/chitosan (CTS) MS were optimized according to the drug loading (DL). The physicochemical properties of the optimal MS (MS F) were characterized. Depending on the gelation temperature and gelating time, the optimal CTS-sodium alginate- (SA-) α,β-glycerophosphate (GP) (CTS-SA-GP) hydrogel was obtained. Observed by scanning electron microscope (SEM), TFV/BSP/CTS MS were successfully encapsulated in CTS-SA-GP. In vitro releasing demonstrated that MS F-CTS-SA-GP retained desirable in vitro sustained-release characteristics as a vaginal delivery system. Bioadhesion measurement showed that MS-CTS-SA-GP exhibited the highest mucoadhesive strength. Collectively, MS-CTS-SA-GP holds great promise for topical applications as a sustained-release vaginal drug delivery system.

Sucrose Acetate Isobutyrate as an In situ Forming Implant for Sustained Release of Local Anesthetics

2019 ◽  
Vol 16 (4) ◽  
pp. 331-340
Author(s):  
Hanmei Li ◽  
Yuling Xu ◽  
Yuna Tong ◽  
Yin Dan ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Local Anesthetics ◽  
Subcutaneous Injection ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Burst Release

Objective: In this study, an injectable Sucrose Acetate Isobutyrate (SAIB) drug delivery system (SADS) was designed and fabricated for the sustained release of Ropivacaine (RP) to prolong the duration of local anesthesia. Methods: By mixing SAIB, RP, and N-methyl-2-pyrrolidone, the SADS was prepared in a sol state with low viscosity before injection. After subcutaneous injection, the pre-gel solution underwent gelation in situ to form a drug-released depot. Result: The in vitro release profiles and in vivo pharmacokinetic analysis indicated that RP-SADS had suitable controlled release properties. Particularly, the RP-SADS significantly reduced the initial burst release after subcutaneous injection in rats. Conclusion: In a pharmacodynamic analysis of rats, the duration of nerve blockade was prolonged by over 3-fold for the RP-SADS formulation compared to RP solution. Additionally, RP-SADS showed good biocompatibility in vitro and in vivo. Thus, the SADS-based depot technology is a safe drug delivery strategy for the sustained release of local anesthetics with long-term analgesia effects.

NANOMEDICINES: DELIVERING DRUGS USING BOTTOM UP NANOTECHNOLOGY

2005 ◽  
Vol 04 (05n06) ◽  
pp. 855-861 ◽  
Author(s):  
MARTIN GARNETT
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Biodegradable Polymers ◽  
Drug Loading ◽  
Dna Delivery ◽  
Delivery Systems ◽  
The Body ◽  
Nanosized Materials

The use of nanosized materials changes the way in which drugs are handled by the body and offers opportunities to improve drug delivery. The physiological mechanisms controlling the distribution of nanosized materials (enhanced permeability and retention effect, cellular uptake pathways and opsonisation/elimination of nanoparticles) are described. Two different nanosized drug delivery systems are considered; drug delivery and DNA delivery. The deficiencies of currently available biodegradable polymers for preparation of drug containing nanoparticles are mainly the amount of drug that can be incorporated and the rapid rate of drug release. The development of new biodegradable polymers which can interact with the drug and so significantly increase drug loading and decrease the rate of drug release are outlined. DNA delivery necessitates overcoming a variety of biological barriers. We are developing polyelectrolyte complexes of DNA with cationic polyamidoamines (PAA) as a delivery system. Complexing PAA with DNA results in good transfection of cells in vitro. However, in vivo, a more complex arrangement of PAA, Polyethylene glycol-PAA copolymers, DNA and the use of ligands will be required. Despite these efforts, further developments will be needed in nanotechnology for both drug and DNA nanoparticle delivery systems to achieve our clinical objectives.

Sign in / Sign up

Export Citation Format

Share Document