scholarly journals Effects of HDPE Plastic Waste Aggregate on the Properties of Concrete

2021 ◽  
Vol 9 (10) ◽  
pp. 519-524
Author(s):  
Shakir Hussain
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Cost Effective ◽  
Strength Properties ◽  
Cement Matrix ◽  
Polymer Concrete ◽  
Hardened Concrete ◽  
Polymer Waste ◽  
Wide Range ◽  
Polymer Wastes

Abstract: Polymer waste volumes have surged in recent years as a result of growing industrialization and fast improvements in living standards. In Malaysia, the majority of polymer waste is discarded rather than recycled. This circumstance results in major issues such as waste of natural resources and pollution of the environment. Polymer products, such as synthetic fibres, plastics, and rubber, are petrochemical compounds that disintegrate slowly in nature. Even after a long amount of time, plastic materials are not easily biodegradable. In reality, a wide range of waste materials can be used as a cement matrix inert. For the manufacture of the polymer concrete, trash bag plastics were employed as polymer wastes HDPE in this study (PC). The purpose of this research is to investigate the characteristics and characterisation of polymer HDPE as a coarse aggregate replacement in concrete. Temperatures of 160°C, 170°C, 180°C, 190°C, and 200°C were used in the heating procedure. By volumetric approach, five compositions of coarse aggregate with varied crushed stone: HDPE waste ratios of 0:100, 15:85, 30:70, 45:55, and 60:40 were utilised. The use of polymerwaste as coarse aggregate in traditional concrete was examined. With fresh and hardened concrete tests, the effects of polymer wastes on the workability and strength of the concrete were investigated. After 28 days, the compressive strength of the PCwas determined to be suitable for nonstructural use. The findings of the cost research revealed that the PC is more cost effective than traditional concrete. Keywords: Polymer Wastes HDPE; Coarse Aggregate; Compressive Strength; Properties

scholarly journals Effect of Water Cement Ratios on Compressive Strength of Palm Kernel Shell Concrete

2019 ◽  
Vol 2 (Issue 1) ◽  
Author(s):  
A.O Adeyemi ◽  
M.A Anifowose ◽  
I.O Amototo ◽  
S.A Adebara ◽  
M.Y Olawuyi
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
Palm Kernel ◽  
Hardened Concrete ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Palm Kernel Shell ◽  
Compressive Strength Of Concrete ◽  
Palm Kernel Shells

This study examined the effect of varying water cement ratio on the compressive strength of concrete produced using palm kernel shell (PKS) as coarse aggregate at different replacement levels. The replacement levels of coarse aggregate with palm kernel shells (PKS) were 0%, 25%, 50%, and 100% respectively. PKS concrete cubes (144 specimens) of sizes 150mm x 150mm x 150mm were cast and cured in water for 7, 14, 21 and 28 days respectively. A mix ratio of 1:2:4 was adopted with water-cement ratio of 0.45, 0.5, and 0.6 respectively while the batching was done by weight. Slump test was conducted on fresh concrete while compressive strength test was carried out on the hardened concrete cubes using a compression testing machine of 2000kN capacity. The result of tests on fresh concrete shows that the slump height of 0.45 water cement ratio (w/c) increases with an increase in PKS%. This trend was similar to 0.50 and 0.60 w/c. However, the compressive strength of concrete cube decreases with an increase in w/c (from 0.45 to 0.60) but increases with respect to curing age and also decreases with increase in PKS%. Concrete with 0.45 water-cement ratio possess the highest compressive strength. It was observed that PKS is not a good substitute for coarse aggregate in mix ratio 1:2:4 for concrete productions. Hence, the study suggest the use of chemical admixture such as superplasticizer or calcium chloride in order to improve the strength of palm kernel shells-concrete.

scholarly journals Impact of Elevated Temperatures on Strength Properties and Microstructure of Calcium Sulfoaluminate Paste

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6751
Author(s):  
Konrad A. Sodol ◽  
Łukasz Kaczmarek ◽  
Jacek Szer ◽  
Sebastian Miszczak ◽  
Mariusz Stegliński
Keyword(s):  
Compressive Strength ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Cooling System ◽  
Base Material ◽  
Visual Assessment ◽  
Strength Properties ◽  
Strength Parameters ◽  
Calcium Sulfoaluminate ◽  
Wide Range

This article is motivated by civil fire safety. Fire-prevention engineering demands a wide range of information about building materials including alternative cements, for instance CSA-cement. Because of exposure of the cement-base material to a high temperature, its strength properties deteriorate due to dehydration connected with phase and microstructure changes. Previous research indicated that the main endothermic reaction of CSA-based composite, dehydration of ettringite, might be used as a cooling system for a metal structure during fire-load. This article examines visual assessment, microstructure, density, as well as flexural and compressive strength parameters of CSA-based composite after isothermal heating at temperatures from 23 °C to 800 °C. The results of SEM/EDS investigations showed that the calcium sulfoaluminate paste may start partially re-sintering above 600 °C. Mechanical tests revealed significant reduction of strength parameters but residual compressive strength was maintained in the whole temperature range e.g., 8 MPa at 800 °C. Additionally, visual assessment of the specimens indicated that it might be possible to predict the material temperature heating based on the specific surface color. These findings add to the evidence of general knowledge about CSA hydrates.

scholarly journals Utilization Iron Filings and Microwave Heating in Roughening the Surface of Smoothed Coarse Aggregates

2018 ◽  
Vol 7 (4.20) ◽  
pp. 395
Author(s):  
Laith Mohammed Ridha Mahmmod Wajde ◽  
S. S. Alyhya Zainab ◽  
M. R. Abdul Rasoul ◽  
Abdulrasool T. Abdulrasool ◽  
. .
Keyword(s):  
Compressive Strength ◽  
Significant Influence ◽  
Smooth Surface ◽  
Coarse Aggregate ◽  
Microwave Treatment ◽  
Hardened Concrete ◽  
Equal Weight ◽  
Coarse Aggregates ◽  
Water Curing ◽  
Adhesion Process

Properties of coarse aggregate such as texture have a significant influence on the performance of fresh and hardened concrete. A smooth surface can enhance workability, yet a rougher one offers a stronger bond between aggregate and paste, resulting in higher strength. This research aims to roughen the texture of white smoothed aggregate by using cement-iron filings mortar with the aid of microwave maturation to accelerate the adhesion process of mortar-aggregate surface. The mortar was prepared by mixing an equal weight of cement and iron filings, of a particular size, with sand. Four different periods (2, 4, 6 and 8 mints.)  of microwave treatment in addition to water curing were considered plus one reference mortar which cured in only air for 24 hrs. The treated aggregate was then used for casting concrete specimens with a w/c ratio of 0.5 in which their properties being determined by means of density, compressive and tensile strengths observations. The main findings revealed that the concrete specimens contained microwave treated aggregate attained higher compressive strength compared with those treated in the air. Data also showed that concrete specimens with microwave treated aggregate possess better tensile properties as a consequence of the improvement in the transition zone.   

scholarly journals THE EFFECT OF CERAMIC WASTE AS COARSE AGGREGATE ON STRENGTH PROPERTIES OF CONCRETE

2017 ◽  
Vol 36 (3) ◽  
pp. 691-696
Author(s):  
EE Ikponmwosa ◽  
SO Ehikhuenmen
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Control Sample ◽  
Strength Properties ◽  
Waste Material ◽  
Partial Replacement ◽  
Replacement Level ◽  
Ceramic Waste ◽  
Curing Age

This paper reports the findings on an experimental investigation of the effect of partial replacement of coarse aggregate with ceramic waste on strength properties of concrete. Compressive strength tests were conducted using 150x150x150mm cube specimens, while tensile strength was investigated using 150x300mm cylinder specimens. Results of tests show that workability, density, compressive and flexural strength of concrete decreased with increase in ceramic waste content. The compressive strength at 90 days curing age for the control sample was 24.67 N/mm2. Compressive strength values at 90 days curing age for  25%, 50% and 75% replacement levels were 21.78 N/mm2, 19.85 N/mm2and 17.85 N/mm2 respectively. The decrease in density and strength was due to ceramic waste being lighter and more porous than normal coarse aggregate. Tensile strength of concrete with ceramic waste decline gradually from 8.39 N/mm2 to 6.13 N/mm2 for the control and 75% replacement samples respectively. This could be attributed to the water absorption capacity and external porcelain nature of the waste material. A production cost savings of 10.7% for 1:2:4 concrete mix was noted at 75% replacement level. This study concludes that ceramic waste could be used for both structural and non-structural works and recommends that beyond 75% replacement level, ceramic waste material should not be used in concrete structures where strength is the major consideration. http://dx.doi.org/10.4314/njt.v36i3.5

Comparative Study on the Elastic Modulus of Polymer Concrete

2015 ◽  
Vol 1129 ◽  
pp. 145-150
Author(s):  
Kyu Seok Yeon ◽  
Kwan Kyu Kim ◽  
Chul Young Kim ◽  
Jae Heum Yeon
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Goodness Of Fit ◽  
Unsaturated Polyester ◽  
Acrylic Resin ◽  
Prediction Equation ◽  
Polymer Concrete ◽  
Wide Range ◽  
Structural Applications ◽  
Using Data

Polymer concrete is used for a wide range of precast structural applications and repair works for existing infrastructures. For these applications, one of the key mechanical propertiesthatneed to be consideredis the elastic modulus. In this study, the relationship between elastic modulus and compressive strength of polymer concrete made with three different types of resin (i.e., unsaturated polyester resin, acrylic resin, and epoxy resin) is comprehensively investigated using data sets available from previous studies in order to develop a prediction equation for elastic modulus that can be generally applied to polymer concrete. Results showed that the equation developed under this study can be reasonably adopted for the predictions of polymer concrete's elastic modulus as a function of compressive strength because the prediction equation has a high goodness of fit asrepresented by a R2 value of 0.77

scholarly journals Performance of Polymer Concrete Seeded with Steel Fibres and Stone Powder

2019 ◽  
Vol 8 (4) ◽  
pp. 9844-9847
Keyword(s):  
Compressive Strength ◽  
Bisphenol A ◽  
Mathematical Models ◽  
Experimental Work ◽  
Strength Properties ◽  
Polymer Concrete ◽  
Cement Concrete ◽  
Steel Fibres ◽  
Concrete Mix

This paper presents the fiber effect in the polymer concrete. The concrete is prepared with 10% Bethemcharla stone powder as replacement to cement and 10% of Bisphenol-A polymer to the concrete mixes. The fibers were incorporated to the concrete in the proportion of 0,1 and 2% by volume of specimen. The study mainly focused to evaluate compressive, split, shear and flexural strengths of concrete. Tests conducted on cube, cylinder and beam specimens and from the results it is found that, the fiber seeding to mixes enhances the strength properties. In addition to the mixes, plan cement concrete mix without stone powder and polymer is prepared and tested for the same strengths, this mix is considered as reference mix for comparison purpose. For present experimental work few mathematical models are established to assess strengths in association of cube compressive strength.

scholarly journals Strength Properties of Concrete with Aggregates from Alternate Sources

2019 ◽  
Vol 9 (1) ◽  
pp. 4066-4069
Keyword(s):  
Compressive Strength ◽  
Glass Powder ◽  
Coarse Aggregate ◽  
Environmental Issues ◽  
Casting Process ◽  
Strength Properties ◽  
Metal Casting ◽  
Fine Aggregate ◽  
Foundry Sand ◽  
Compressive Strength Of Concrete

Aggregates used in concrete are fast depleting natural resource and the quarrying of which is causing environmental issues. Hence, the use of aggregate from alternate sources such as from waste discarded glass, from foundry sand discarded after metal casting process and sea shells is investigated. Compressive strength of concrete with glass powder, foundry sand and sea shell is studied individually. Concrete is cast with glass powder and foundry sand as 5%, 10%, 15% and 20% replacement of fine aggregate and with sea shell as 5%, 10%, 15% and 20% replacement of coarse aggregate individually. It is observed that compressive strength of concrete decreases with glass powder, foundry sand, and sea shell. Fine aggregate replaced by 10% glass powder, 10%, foundry sand and coarse aggregate replaced by 10% sea shell have the least decrease in strength when compared to control concrete mix.

scholarly journals Characteristics of Eco-Friendly Metakaolin Based Geopolymer Concrete Pavement Bricks

2020 ◽  
Vol 38 (11A) ◽  
pp. 1706-1716
Author(s):  
Wasan I. Khalil ◽  
Qias J. Frayyeh ◽  
Mahmood F. Ahmed
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Abrasion Resistance ◽  
Coarse Aggregate ◽  
Partial Replacement ◽  
Geopolymer Concrete ◽  
Clay Brick ◽  
Waste Plastic ◽  
Wide Range ◽  
Geopolymer Binder

The purpose of this work is to investigate the possibility to recycled and reused of waste clay brick and waste plastic as constituents in the production of green Geopolymer concrete paving bricks. Powder of clay brick waste (WBP) was used as a partial replacement of Metakaolin (MK) in Geopolymer binder. Moreover, recycled clay brick waste aggregate (BA) and plastic waste aggregate (PL) were incorporated as coarse aggregate in mixtures of Metakaolin based Geopolymer concrete (MK-GPC) pavement bricks. Six types of mixtures were prepared and cast as pavement bricks with dimensions of 150×150×100 mm. All samples have been tested for compressive strength, water absorption and abrasion resistance at age of 28 days; and compared the results with the requirements of Iraqi specification No.1606-2006. The MK-GPC pavement bricks present a compressive strength of 31-47MPa, water absorption of 3.66% to5.32% and abrasion resistance with groove length between 21.78mm to 18.91 mm. These types of pavement bricks are classified as a medium to light capacity for weight loading, and it is possible to be used in wide range of paving applications, especially in aggressive wearing environment.

scholarly journals EFFICACY OF BASALT AND GRANITE AS COARSE AGGREGATE IN CONCRETE MIXTURE

2020 ◽  
Vol 7 (9) ◽  
pp. 1-9
Author(s):  
S.E Ubi ◽  
P.O Nkra ◽  
R.B Agbor ◽  
D.E Ewa ◽  
M. Nuchal
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Specific Gravity ◽  
Coarse Aggregate ◽  
Strength Properties ◽  
Test Results ◽  
Physical Test ◽  
Coarse Aggregates ◽  
Structural Tests ◽  
Comparative Results

This present research was on the comparison of the efficacious use of basalt and granite as coarse aggregates in concrete work. In order to obtain the basis for comparison, physical and structural tests were conducted on the different materials of the concrete and the concrete samples respectively. Physical test results revealed that basalt have a specific gravity of 2.8 and 2.5, while granite have a specific gravity of 2.9 and 2.6. In density, basalt have a density of 1554.55kg/m3 while granite had a density of 1463.64kg/m3. Aggregate impact test conducted on both aggregates revealed a percentage of 11.05% for basalt and 12.63% for granite. The following structural tests were carried out: compressive strength tests, flexural and tensile strength test and the comparative results are as follows. Compressive strength for basalt 36.39N/mm2 while 37.16N/mm2 for granite. 24.81N/mm2 tensile strength for basalt while 12.57N/mm2 for granite, 31.83N/mm2 flexural strength for basalt while 27.97N/mm2 for granite. From the above results, it can be deduced that basalt has higher strength properties than granite. Therefore, more suitable for coarse aggregate in achieving higher strength with some quantity of other composition of the concrete mix when compared to granite.

scholarly journals Fire resistance of lightweight foam concrete by incorporating lightweight bio-based aggregate

2021 ◽  
Vol 920 (1) ◽  
pp. 012009
Author(s):  
M K Yew ◽  
M C Yew ◽  
J H Beh ◽  
L H Saw ◽  
Y L Lee ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fire Resistance ◽  
Coarse Aggregate ◽  
Positive Outcome ◽  
Strength Properties ◽  
Sound Insulation ◽  
Foam Concrete ◽  
Load Bearing ◽  
Oil Palm Shell ◽  
Lightweight Foam

Abstract Concrete is widely used in the industry due to its effectiveness in terms of cost and strength. In this study, the introduction of bio-based aggregate as coarse aggregate in lightweight foam concrete will be investigated to find a better solution for fire incidents that are commonly happened. As such, lightweight foam concrete (LWFC) has been applied in many buildings especially in non-load bearing wall to enhance thermal conductivity, sound insulation and fire resistance. The aim of this research is to investigate the effect of incorporating bio-based aggregate namely oil palm shell (OPS) into lightweight form concrete in terms of strength properties and fire resistance. Three different concrete mix was designed containing different percentage of OPS aggregate replacement (0, 5, 10 and 15%). From the result, the compressive strength of the LWFC-CTR mixture had achieved the highest compressive strength at 28-day, which is recorded at 3.82 MPa. The fire resistance of LWFC-OPS 15% had showed a positive outcome with improvement by almost 23.5% compared to control mix at 15 minutes. Therefore, the major finding of this research is the incorporation of eco-friendly OPS aggregate has improved the fire resistance of lightweight foam concrete, which can be used as an alternative solution for non-load bearing walls.

Sign in / Sign up

Export Citation Format

Share Document