scholarly journals Synergy of Practical Knowledge of Molding Sands Reclamation in Heavy Casting Foundry of Iron Alloys

2013 ◽  
Vol 13 (3) ◽  
pp. 30-36 ◽  
Author(s):  
Z. Ignaszak ◽  
J-B. Prunier
Keyword(s):  
Cast Iron ◽  
Practical Knowledge ◽  
Cast Steel ◽  
Iron Alloys ◽  
Thermal Regeneration ◽  
Molding Sand ◽  
Iron Castings ◽  
Dynamic Phenomena

Abstract The paper summarizes research realized by the author in laboratory and industrial conditions (foundries of cast steel and cast iron, castings up to 50 tons) on the effects of the chemically hardened molding sands regeneration using hard/soft rubbing in the dry reclamation. A reference was simultaneously made to advisability of application of the thermal regeneration in conditions, where chromite amount in the circulating (reclaimed) molding sand goes as high as above ten percent. An advisability of connecting standard and specialized methods of examination of the reclaimed sands and molding sands made using it was pointed out. A way of application of studies with the Hot Distortion Plus® method modified by the author for validation of modeling of the thermo-dynamic phenomena in the mold was shown.

scholarly journals Shaping the Microstructure of High-Aluminum Cast Iron in Terms of the Phenomenon of Spontaneous Decomposition Generated by the Presence of Aluminum Carbide

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 5993
Author(s):  
Robert Gilewski ◽  
Dariusz Kopyciński ◽  
Edward Guzik ◽  
Andrzej Szczęsny
Keyword(s):  
Cast Iron ◽  
Aluminum Carbide ◽  
The Self ◽  
Molding Sand ◽  
Aluminum Scrap ◽  
Iron Aluminum ◽  
Iron Castings ◽  
Abrasive Properties ◽  
High Aluminum ◽  
Main Factor

A suitable aluminum additive in cast iron makes it resistant to heat in a variety of environments and increases the abrasion resistance of the cast iron. It should be noted that high-aluminum cast iron has the potential to become an important eco-material. The basic elements from which it is made—iron, aluminum and a small amount of carbon—are inexpensive components. This material can be made from contaminated aluminum scrap, which is increasingly found in metallurgical scrap. The idea is to produce iron castings with the highest possible proportion of aluminum. Such castings are heat-resistant and have good abrasive properties. The only problem to be solved is to prevent the activation of the phenomenon of spontaneous decomposition. This phenomenon is related to the Al4C3 hygroscopic aluminum carbide present in the structure of cast iron. Previous attempts to determine the causes of spontaneous disintegration by various researchers do not describe them comprehensively. In this article, the mechanism of the spontaneous disintegration of high-aluminum cast iron castings is defined. The main factor is the large relative geometric dimensions of Al4C3 carbide. In addition, methods for counteracting the phenomenon of spontaneous decay are developed, which is the main goal of the research. It is found that a reduction in the size of the Al4C3 carbide or its removal lead to the disappearance of the self-disintegration effect of high-aluminum cast iron. For this purpose, an increased cooling rate of the casting is used, as well as the addition of elements (Ti, B and Bi) to cast iron, supported in some cases by heat treatment. The tests are conducted on the cast iron with the addition of 34–36% mass aluminum. The molten metal is superheated to 1540 °C and then the cast iron samples are cast at 1420 °C. A molding sand with bentonite is used to produce casting molds.

scholarly journals Discussion on Usability of the Niyama Criterion for Porosity Predicting in Cast Iron Castings

2017 ◽  
Vol 17 (3) ◽  
pp. 196-204 ◽  
Author(s):  
Z. Ignaszak
Keyword(s):  
Cast Iron ◽  
Cast Steel ◽  
Experimental Studies ◽  
Post Processing ◽  
Cast Irons ◽  
Niyama Criterion ◽  
Iron Castings ◽  
Steel Castings ◽  
Shrinkage Compensation ◽  
Simulation Codes

Abstract The paper refers to previous publications of the author, focused on criteria of casting feeding, including the thermal criterion proposed by Niyama. On the basis of this criterion, present in the post-processing of practically all the simulation codes, danger of casting compactness (in the sense of soundness) in form of a microporosity, caused by the shrinkage phenomena, is predicted. The vast majority of publications in this field concerns shrinkage and feeding phenomena in the cast steel castings – these are the alloys, in which parallel expansion phenomenon does not occur as in the cast irons (graphite crystallization). The paper, basing on the simulation-experimental studies, presents problems of usability of a classic, definition-based approach to the Niyama criterion for the cast iron castings, especially of greater massiveness, for prediction of presence of zones of dispersed porosity, with relation to predictions of the shrinkage type defects. The graphite expansion and its influence on shrinkage compensation during solidification of eutectic is also discussed.

scholarly journals Management of the activity of quality assurance of cast iron castings in foundries

2021 ◽  
Vol 1781 (1) ◽  
pp. 012050
Author(s):  
A Josan ◽  
E Ardelean ◽  
M Ardelean ◽  
V Puţan
Keyword(s):  
Quality Assurance ◽  
Cast Iron ◽  
Iron Castings

scholarly journals Influence of Technological Parameters of Furane Mixtures on Shrinkage Creation in Ductile Cast Iron Castings

2014 ◽  
Vol 59 (3) ◽  
pp. 1037-1040 ◽  
Author(s):  
I. Vasková ◽  
M. Hrubovčáková ◽  
J. Malik ◽  
Š. Eperješi
Keyword(s):  
Cast Iron ◽  
Ductile Iron ◽  
Ductile Cast Iron ◽  
Gating System ◽  
Technological Parameters ◽  
Iron Castings ◽  
Steel Castings ◽  
The Impact ◽  
Very High ◽  
Great Development

Abstract Ductile cast iron (GS) has noticed great development in last decades and its boom has no analogue in history humankind. Ductile iron has broaden the use of castings from cast iron into areas, which where exclusively domains for steel castings. Mainly by castings, which weight is very high, is the propensity to shrinkage creation even higher. Shrinkage creation influences mainly material, construction of casting, gating system and mould. Therefore, the main realized experiment was to ascertain the influence of technological parameters of furane mixture on shrinkage creation in castings from ductile iron. Together was poured 12 testing items in 3 moulds forto determine and compare the impact of various technological parameters forms the propensity for shrinkage in the casting of LGG.

scholarly journals Opening Material as the Possibility of Elimination Veining in Foundries

2016 ◽  
Vol 16 (3) ◽  
pp. 157-161 ◽  
Author(s):  
M. Hrubovčáková ◽  
I. Vasková ◽  
M. Benková ◽  
M. Conev
Keyword(s):  
Thermal Conductivity ◽  
Particle Size ◽  
Thermal Expansion ◽  
Cast Iron ◽  
Granular Material ◽  
Surface Defects ◽  
Silica Sand ◽  
Iron Castings ◽  
Thermal Dilatation

Abstract The main bulk density representation in the molding material is opening material, refractory granular material with a particle size of 0.02 mm. It forms a shell molds and cores, and therefore in addition to activating the surface of the grain is one of the most important features angularity and particle size of grains. These last two features specify the porosity and therefore the permeability of the mixture, and thermal dilatation of tension from braking dilation, the thermal conductivity of the mixture and even largely affect the strength of molds and cores, and thus the surface quality of castings. [1] Today foundries, which use the cast iron for produce of casts, are struggling with surface defects on the casts. One of these defects are veining. They can be eliminated in several ways. Veining are foundry defects, which arise as a result of tensions generated at the interface of the mold and metal. This tension also arises due to abrupt thermal expansion of silica sand and is therefore in the development of veining on the surface of casts deal primarily influences and characteristics of the filler material – opening material in the production of iron castings.

scholarly journals Extension of Flow Behaviour and Damage Models for Cast Iron Alloys with Strain Rate Effect

2020 ◽  
Author(s):  
Chuang Liu ◽  
Dongzhi Sun ◽  
Xianfeng Zhang ◽  
Florence Andrieux ◽  
Tobias Gerster
Keyword(s):  
Cast Iron ◽  
Constitutive Model ◽  
Strain Rate ◽  
Mechanical Behavior ◽  
Damage Model ◽  
Iron Alloys ◽  
Strain Rate Range ◽  
Strain Rates ◽  
Damage Models ◽  
Rate Dependent

Abstract Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry. To study the mechanical behavior of a typical ductile cast iron (GJS-450) with nodular graphite, uni-axial quasi-static and dynamic tensile tests at strain rates of 10− 4, 1, 10, 100, and 250 s− 1 were carried out. In order to investigate the effects of stress state, specimens with various geometries were used in the experiments. Stress–strain curves and fracture strains of the GJS-450 alloy in the strain-rate range of 10− 4 to 250 s− 1 were obtained. A strain rate-dependent plastic flow law based on the Voce model is proposed to describe the mechanical behavior in the corresponding strain-rate range. The deformation behavior at various strain rates is observed and analyzed through simulations with the proposed strain rate-dependent constitutive model. The available damage model from Bai and Wierzbicki is extended to take the strain rate into account and calibrated based on the analysis of local fracture strains. The validity of the proposed constitutive model including the damage model was verified by the corresponding experimental results. The results show that the strain rate has obviously nonlinear effects on the yield stress and fracture strain of GJS-450 alloys. The predictions with the proposed constitutive model and damage models at various strain rates agree well with the experimental results, which illustrates that the rate-dependent flow rule and damage models can be used to describe the mechanical behavior of cast iron alloys at elevated strain rates.

scholarly journals RESEARCH OF THE INFLUENCE OF SLOW-DOWN COOLING SPEED IN THE INTERVAL OF EUTEKTIC TRANSFORMATION ON THE STRUCTURE AND MECHANICAL PROPERTIES OF CAST IRON CASTINGS

2020 ◽  
pp. 51-55
Author(s):  
N. I. Gabelchenko ◽  
N. A. Kidalov ◽  
A. A. Belov ◽  
M. D. Bezmogorychnyy ◽  
A. I. Gabelchenko
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Cooling Rate ◽  
Quality Index ◽  
Fuel Oil ◽  
Controlled Cooling ◽  
Slowing Down ◽  
Eutectic Transformation ◽  
Iron Castings ◽  
Cooling Speed

The work is devoted to the study of the effect of slowing down the cooling rate in the interval of eutectic transformation on the structure and mechanical properties of castings from gray doeutectic iron. To slow down the cooling rate in the interval of eutectic transformation, an exothermic carbon-containing additive, fuel oil M-100, was used. It is shown that the use of controlled cooling can significantly increase the quality index of cast iron without introducing additional alloying elements into the composition of cast iron.

Sign in / Sign up

Export Citation Format

Share Document