Pengamanan Lontar Digital Dengan Tanda Tangan Digital Menggunakan Algoritma RSA

2022 ◽  
Vol 10 (2) ◽  
pp. 199
Author(s):  
I Gede Bendesa Aria Harta ◽  
I Ketut Gede Suhartana ◽  
I Gusti Ngurah Anom Cahyadi ◽  
Cokorda Pramartha ◽  
I Komang Ari Mogi ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Cultural Heritage ◽  
Mean Square Error ◽  
Digital Signature ◽  
Mean Square ◽  
Test Results ◽  
Rsa Algorithm ◽  
Basic Source ◽  
Pdf Format ◽  
Historical Life

Lontar is a relic of cultural heritage whose basic source of manufacture is from rontal or tal leaves containing evidence of all records of aspects of ancient historical life which include historical values, religion, philosophy, medicine, literature and other sciences so that their sustainability needs to be maintained. Security of digital lontar will make it easier to preserve a lontar work so that it is not changed or falsified by irresponsible parties, where digital lontar in PDF format will be given a digital signature to maintain the authenticity of the document. Documents that are signed will be difficult for other parties to change, if the contents of a digital ejection are changed it will cause the digital signature to change. Based on the research conducted, from the results of testing the security of digital ejection with digital signatures using the RSA algorithm, the test results from RMSE (Root Mean Square Error) for description results with an average of 69.7794143. The larger or random the description results, the more complex the description results will be.

scholarly journals Experimental Validation of Numerical Model for Bi-Tilt-Isolator

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Ming-Hsiang Shih ◽  
Wen-Pei Sung ◽  
Chia-Yu Ho
Keyword(s):  
Mathematical Model ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Friction Force ◽  
Polynomial Function ◽  
Mean Square ◽  
Test Results ◽  
Cubic Polynomial ◽  
Simulation Results

Bi-Tilt Isolator (BTI) is composed of bi-tilt beveled substrate and slider. The advantages of BTI are that the maximum upload seismic force of structure can be easily controlled and displacement of isolation layer will be reduced. Sliding force, friction force, and impulse force are caused in the slanting process of BTI, nonlinear behavior. A nonlinear mathematical model is derived based on the sliding upwards, sliding downwards, and transition stages. Then, BTI element of nonlinear analysis program, GENDYN, is developed by the fourth-order Runge-Kutta method, the discretized ordinary differential equation for three movement stages of BTI. Then, test set-up of superstructure installed with BTI is tested and recorded the real displacement and acceleration responses under conditions of full lubrication, mild lubrication, and without lubrication between interface of bi-tilt beveled substrate and slider with three various initial displacements. The comparison of simulation results and test results shows the following: (1) root mean square error is below 1.35% for WD40 sprayed, 0.47% for WD40 whipped, and 0.54% for without lubrication, respectively; (2) the maximum root mean square error for simulating with cubic polynomial function of friction is much less than those of constant friction except conditions of full lubrication, which are not affected by kinetic friction force; (3) application of cubic polynomial function for simulating friction of BTI with three different lubricated conditions can perform very fine simulation results, compared with the test results. This proposed mathematical model and BTI element of GENDYN program, using cubic polynomial function of friction, perform fine simulation capability to assess nonlinear isolation effect of structure installed with BTI.

scholarly journals Estimation of Apple Flowering Frost Loss for Fruit Yield Based on Gridded Meteorological and Remote Sensing Data in Luochuan, Shaanxi Province, China

2021 ◽  
Vol 13 (9) ◽  
pp. 1630
Author(s):  
Yaohui Zhu ◽  
Guijun Yang ◽  
Hao Yang ◽  
Fa Zhao ◽  
Shaoyu Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Minimum Temperature ◽  
Price Regulation ◽  
Flowering Period ◽  
Mean Square ◽  
Prevention Measures ◽  
Agricultural Insurance

With the increase in the frequency of extreme weather events in recent years, apple growing areas in the Loess Plateau frequently encounter frost during flowering. Accurately assessing the frost loss in orchards during the flowering period is of great significance for optimizing disaster prevention measures, market apple price regulation, agricultural insurance, and government subsidy programs. The previous research on orchard frost disasters is mainly focused on early risk warning. Therefore, to effectively quantify orchard frost loss, this paper proposes a frost loss assessment model constructed using meteorological and remote sensing information and applies this model to the regional-scale assessment of orchard fruit loss after frost. As an example, this article examines a frost event that occurred during the apple flowering period in Luochuan County, Northwestern China, on 17 April 2020. A multivariable linear regression (MLR) model was constructed based on the orchard planting years, the number of flowering days, and the chill accumulation before frost, as well as the minimum temperature and daily temperature difference on the day of frost. Then, the model simulation accuracy was verified using the leave-one-out cross-validation (LOOCV) method, and the coefficient of determination (R2), the root mean square error (RMSE), and the normalized root mean square error (NRMSE) were 0.69, 18.76%, and 18.76%, respectively. Additionally, the extended Fourier amplitude sensitivity test (EFAST) method was used for the sensitivity analysis of the model parameters. The results show that the simulated apple orchard fruit number reduction ratio is highly sensitive to the minimum temperature on the day of frost, and the chill accumulation and planting years before the frost, with sensitivity values of ≥0.74, ≥0.25, and ≥0.15, respectively. This research can not only assist governments in optimizing traditional orchard frost prevention measures and market price regulation but can also provide a reference for agricultural insurance companies to formulate plans for compensation after frost.

scholarly journals Low Cost Automatic Reconstruction of Tree Structure by AdQSM with Terrestrial Close-Range Photogrammetry

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1020
Author(s):  
Yanqi Dong ◽  
Guangpeng Fan ◽  
Zhiwu Zhou ◽  
Jincheng Liu ◽  
Yongguo Wang ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Low Cost ◽  
Reference Value ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Structure ◽  
Mean Square ◽  
Tree Model

The quantitative structure model (QSM) contains the branch geometry and attributes of the tree. AdQSM is a new, accurate, and detailed tree QSM. In this paper, an automatic modeling method based on AdQSM is developed, and a low-cost technical scheme of tree structure modeling is provided, so that AdQSM can be freely used by more people. First, we used two digital cameras to collect two-dimensional (2D) photos of trees and generated three-dimensional (3D) point clouds of plot and segmented individual tree from the plot point clouds. Then a new QSM-AdQSM was used to construct tree model from point clouds of 44 trees. Finally, to verify the effectiveness of our method, the diameter at breast height (DBH), tree height, and trunk volume were derived from the reconstructed tree model. These parameters extracted from AdQSM were compared with the reference values from forest inventory. For the DBH, the relative bias (rBias), root mean square error (RMSE), and coefficient of variation of root mean square error (rRMSE) were 4.26%, 1.93 cm, and 6.60%. For the tree height, the rBias, RMSE, and rRMSE were—10.86%, 1.67 m, and 12.34%. The determination coefficient (R2) of DBH and tree height estimated by AdQSM and the reference value were 0.94 and 0.86. We used the trunk volume calculated by the allometric equation as a reference value to test the accuracy of AdQSM. The trunk volume was estimated based on AdQSM, and its bias was 0.07066 m3, rBias was 18.73%, RMSE was 0.12369 m3, rRMSE was 32.78%. To better evaluate the accuracy of QSM’s reconstruction of the trunk volume, we compared AdQSM and TreeQSM in the same dataset. The bias of the trunk volume estimated based on TreeQSM was −0.05071 m3, and the rBias was −13.44%, RMSE was 0.13267 m3, rRMSE was 35.16%. At 95% confidence interval level, the concordance correlation coefficient (CCC = 0.77) of the agreement between the estimated tree trunk volume of AdQSM and the reference value was greater than that of TreeQSM (CCC = 0.60). The significance of this research is as follows: (1) The automatic modeling method based on AdQSM is developed, which expands the application scope of AdQSM; (2) provide low-cost photogrammetric point cloud as the input data of AdQSM; (3) explore the potential of AdQSM to reconstruct forest terrestrial photogrammetric point clouds.

scholarly journals Rapid Biochemical Methane Potential Evaluation of Anaerobic Co-Digestion Feedstocks Based on Near Infrared Spectroscopy and Chemometrics

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1460
Author(s):  
Jinming Liu ◽  
Changhao Zeng ◽  
Na Wang ◽  
Jianfei Shi ◽  
Bo Zhang ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Variable Selection ◽  
Root Mean Square Error ◽  
Least Squares ◽  
Mean Square Error ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Mean Square ◽  
Biochemical Methane Potential ◽  
Methane Potential

Biochemical methane potential (BMP) of anaerobic co-digestion (co-AD) feedstocks is an essential basis for optimizing ratios of materials. Given the time-consuming shortage of conventional BMP tests, a rapid estimated method was proposed for BMP of co-AD—with straw and feces as feedstocks—based on near infrared spectroscopy (NIRS) combined with chemometrics. Partial least squares with several variable selection algorithms were used for establishing calibration models. Variable selection methods were constructed by the genetic simulated annealing algorithm (GSA) combined with interval partial least squares (iPLS), synergy iPLS, backward iPLS, and competitive adaptive reweighted sampling (CARS), respectively. By comparing the modeling performances of characteristic wavelengths selected by different algorithms, it was found that the model constructed using 57 characteristic wavelengths selected by CARS-GSA had the best prediction accuracy. For the validation set, the determination coefficient, root mean square error and relative root mean square error of the CARS-GSA model were 0.984, 6.293 and 2.600, respectively. The result shows that the NIRS regression model—constructed with characteristic wavelengths, selected by CARS-GSA—can meet actual detection requirements. Based on a large number of samples collected, the method proposed in this study can realize the rapid and accurate determination of the BMP for co-AD raw materials in biogas engineering.

scholarly journals Quality of wood in the stands of poplar clones

2008 ◽  
Vol 54 (No. 1) ◽  
pp. 9-16
Author(s):  
R. Petráš ◽  
J. Mecko ◽  
V. Nociar
Keyword(s):  
Root Mean Square Error ◽  
Systematic Error ◽  
Mean Square Error ◽  
Statistical Tests ◽  
Mean Square ◽  
Poplar Clones ◽  
Mean Diameter ◽  
Empirical Material ◽  
Relative Root

The results obtained in research on the quality of raw timber by means of the structure of assortments for the stands of poplar clones Robusta and I-214 are presented in the paper. Models for an estimation of the structure of basic assortments of poplar stands were constructed separately for each clone in dependence on mean diameter, quality of stems, and damage to stems in the stand. The clone Robusta has higher proportions of higher-quality assortments than the clone I-214. The accuracy of models was determined on empirical material. It was confirmed by statistical tests that the models did not have a systematic error. The relative root mean-square error for main assortments of the clone I-214 is 15–27% and Robusta 13–24%.

Comparison of Thresholding and Edge Detection Segmentation Techniques

2013 ◽  
Vol 860-863 ◽  
pp. 2783-2786
Author(s):  
Yu Bing Dong ◽  
Hai Yan Wang ◽  
Ming Jing Li
Keyword(s):  
Image Segmentation ◽  
Root Mean Square Error ◽  
Edge Detection ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Experimental Results ◽  
Mean Square ◽  
Segmentation Method ◽  
Segmentation Algorithms

Edge detection and thresholding segmentation algorithms are presented and tested with variety of grayscale images in different fields. In order to analyze and evaluate the quality of image segmentation, Root Mean Square Error is used. The smaller error value is, the better image segmentation effect is. The experimental results show that a segmentation method is not suitable for all images segmentation.

Quantitative Analysis of Forsythiae fructus by Near Infrared Spectroscopy

2013 ◽  
Vol 807-809 ◽  
pp. 1967-1971
Author(s):  
Yan Bai ◽  
Xiao Yan Duan ◽  
Hai Yan Gong ◽  
Cai Xia Xie ◽  
Zhi Hong Chen ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Cross Validation ◽  
Ethanol Extract ◽  
Mean Square ◽  
Validation Set

In this paper, the content of forsythoside A and ethanol-extract were rapidly determinated by near-infrared reflectance spectroscopy (NIRS). 85 samples of Forsythiae Fructus harvested in Luoyang from July to September in 2012 were divided into a calibration set (75 samples) and a validation set (10 samples). In combination with the partical least square (PLS), the quantitative calibration models of forsythoside A and ethanol-extract were established. The correlation coefficient of cross-validation (R2) was 0.98247 and 0.97214 for forsythoside A and ethanol-extract, the root-mean-square error of calibration (RMSEC) was 0.184 and 0.570, the root-mean-square error of cross-validation (RMSECV) was 0.81736 and 0.36656. The validation set were used to evaluate the performance of the models, the root-mean-square error of prediction (RMSEP) was 0.221 and 0.518. The results indicated that it was feasible to determine the content of forsythoside A and ethanol-extract in Forsythiae Fructus by near-infrared spectroscopy.

scholarly journals The CSS and The Two-Staged Methods for Parameter Estimation in SARFIMA Models

2011 ◽  
Vol 2011 ◽  
pp. 1-11 ◽  
Author(s):  
Erol Egrioglu ◽  
Cagdas Hakan Aladag ◽  
Cem Kadilar
Keyword(s):  
Time Series ◽  
Parameter Estimation ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Simulation Study ◽  
Long Memory ◽  
Moving Average ◽  
Mean Square ◽  
Sample Sizes ◽  
Advantages And Disadvantages

Seasonal Autoregressive Fractionally Integrated Moving Average (SARFIMA) models are used in the analysis of seasonal long memory-dependent time series. Two methods, which are conditional sum of squares (CSS) and two-staged methods introduced by Hosking (1984), are proposed to estimate the parameters of SARFIMA models. However, no simulation study has been conducted in the literature. Therefore, it is not known how these methods behave under different parameter settings and sample sizes in SARFIMA models. The aim of this study is to show the behavior of these methods by a simulation study. According to results of the simulation, advantages and disadvantages of both methods under different parameter settings and sample sizes are discussed by comparing the root mean square error (RMSE) obtained by the CSS and two-staged methods. As a result of the comparison, it is seen that CSS method produces better results than those obtained from the two-staged method.

Sign in / Sign up

Export Citation Format

Share Document