scholarly journals STRUKTUR MIKRO DAN SIFAT MEKANIS ALUMINIUM (Al-Si) PADA PROSES PENGECORAN MENGGUNAKAN CETAKAN LOGAM, CETAKAN PASIR DAN CETAKAN CASTABLE

POROS ◽  
2017 ◽  
Vol 14 (2) ◽  
pp. 88
Author(s):  
Martinus Mandala ◽  
Eddy Siradj ◽  
Sofyan Djamil
Keyword(s):  
Large Scale ◽  
Raw Materials ◽  
Raw Material ◽  
Small Scale ◽  
Cast Aluminum ◽  
Metal Mold ◽  
The Public ◽  
A Value ◽  
The Difference ◽  
Casting Industry

Abstract: Aluminum foundry is one of the business sectors that to much in demand by the public, ranging from small scale to large scale . Through remelting process, some small-scale aluminum casting industry, using raw materials of used aluminum as the main raw material. Some of the cast products are required to have good quality to comply with quality standards on its use. This study aims to look at the difference in quality of cast aluminum (Al-Si) using three types of mold, the metal mold, sand mold, and the mold castable by testing the mechanical properties of materials that impact and Brinell hardness testing. The method used was experimental or trial. The results obtained are the result cast using a metal mold has a hardness value of the highest of 63 HBN, with a value of impact 37

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals Forecast of International Trade of Lithium Carbonate Products in Importing Countries and Small-Scale Exporting Countries

2021 ◽  
Vol 13 (3) ◽  
pp. 1251
Author(s):  
Yichi Zhang ◽  
Zhiliang Dong ◽  
Sen Liu ◽  
Peixiang Jiang ◽  
Cuizhi Zhang ◽  
...  
Keyword(s):  
International Trade ◽  
Large Scale ◽  
Prediction Method ◽  
Lithium Ion ◽  
Lithium Carbonate ◽  
Raw Material ◽  
Small Scale ◽  
Trade Restrictions ◽  
Energy Field ◽  
Structure Of Trade

As the raw material of lithium-ion batteries, lithium carbonate plays an important role in the development of new energy field. Due to the extremely uneven distribution of lithium resources in the world, the security of supply in countries with less say would be greatly threatened if trade restrictions or other accidents occurred in large-scale exporting countries. It is of great significance to help these countries find new partners based on the existing trade topology. This study uses the link prediction method, based on the perspective of the topological structure of trade networks in various countries and trade rules, and eliminates the influence of large-scale lithium carbonate exporting countries on the lithium carbonate trade of other countries, to find potential lithium carbonate trade links among importing and small-scale exporting countries, and summarizes three trade rules: (1) in potential relationships involving two net importers, a relationship involving either China or the Netherlands is more likely to occur; (2) for all potential relationships, a relationship that actually occurred for more than two years in the period in 2009–2018 is more likely to occur in the future; and (3) potential relationships pairing a net exporter with a net importer are more likely to occur than other country combinations. The results show that over the next five to six years, Denmark and Italy, Netherlands and South Africa, Turkey and USA are most likely to have a lithium carbonate trading relationship, while Slovenia and USA, and Belgium and Thailand are the least likely to trade lithium carbonate. Through this study, we can strengthen the supply security of lithium carbonate resources in international trade, and provide international trade policy recommendations for the governments of importing countries and small-scale exporting countries.

scholarly journals PEMANFAATAN LIMBAH FLY ASH DARI PEMBAKARAN BATUBARA PADA PEMBUATAN SEMEN PCC (PORTLAND COMPOSITE CEMENT) DI PT SEMEN XYZ LAMPUNG

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Dwi Septiyana Sari ◽  
◽  
Susanti Sundari
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Raw Materials ◽  
Testing Machine ◽  
Technical Aspect ◽  
Raw Material ◽  
Physical Test ◽  
Composite Cement ◽  
The Difference ◽  
The Cost

Abstract This study discusses the use of fly ash waste from coal burning on the manufacture of PCC (Portland composite cement) at PT. XYZ Lampung. The purpose of this research is to look at the technical studies and the efficiency of raw materials in the use of fly ash in cement making, in this case PCC cement (Portland Composite Cement). The steps taken in analyzing the data in this study were viewed from a technical aspect by means of a physical test, namely the cement compressive strength test at the age of 3 days, 7 days, and 28 days using the Compression Testing Machine. This test was conducted to see the comparison of the compressive strength of PCC cement using limestone and fly ash as raw materials, then calculate the difference in raw material costs in the year before and after the replacement of limestone with fly ash. The results showed that cement with the addition of fly ash after 3 days, 7 days and 28 days had an increased compressive strength value, which increased 21.69%, 16.07% and 8.05% respectively of the compressive strength of cement using limestone. The use of fly ash as a substitute for limestone has an effect on the cost of raw materials, where the difference between the cost of raw materials in 2019 and the cost of raw materials in 2018 is Rp. 39,440,952,074.

scholarly journals Comparative anatomical and histological research of the roots of Rheum Palmatum L. And Rheum Officinale B.

2020 ◽  
Vol 19 (5-6) ◽  
pp. 155-159
Author(s):  
Ksenia N. Semenyuta ◽  
Anna A. Shmygareva ◽  
Anatoly N. Sankov
Keyword(s):  
Histological Analysis ◽  
Raw Materials ◽  
Raw Material ◽  
Histochemical Reaction ◽  
Closely Related Species ◽  
Histological Studies ◽  
Rheum Palmatum ◽  
Anthracene Derivatives ◽  
The Russian Federation ◽  
The Difference

Introduction. The aim of the study is to perform the anatomical and histological analysis of the roots of Rheum palmatum L. and Rheum officinale B., and also to check histochemical reactions for the presence of anthracene derivatives. Material and methods. The methodological basis of the anatomical and histological studies was the standard method for the preparation of micro-preparations of roots of Rheum palmatum L. and Rheum officinale B. described in the State Pharmacopoeia of the Russian Federation, XIV edition (OFS.1.5.3.003.15). Results and discussion. Anatomical and histological studies of Rheum palmatum L. and Rheum officinale B. raw materials confirmed the roots of Rheum palmatum L. to have classical secondary structure, while the roots of Rheum officinale B. have classical primary structure. The histochemical reaction to anthracene derivatives with 10% alkali solution was carried out, it resulted in cherry-red staining of core rays and some structures of cortical parenchyma of the fragment of Rheum palmatum L., while the roots of Rheum officinale B. failed to stain. Conclusions. The anatomical and histological studies of the rhizomes and roots of Rheum palmatum L. and Rheum officinale B. demonstrate the difference in the structure of closely related species of plants. It makes possible to identify the medicinal raw material of these plants.

scholarly journals RANCANG BANGUN SISTEM INFORMASI PERSEDIAAN BAHAN BAKU DAN ADMINISTRASI GUDANG MAJEMUK (STUDI KASUS KAROSERI PT. XYZ MALANG)

2017 ◽  
Vol 2 (2) ◽  
pp. 146-152
Author(s):  
Denny Lukianto Kumala ◽  
Soetam Rizky Wicaksono
Keyword(s):  
Manufacturing Process ◽  
Raw Materials ◽  
Influential Factor ◽  
Raw Material ◽  
Accounting System ◽  
Accurate Calculation ◽  
Counting System ◽  
Administration System ◽  
The Difference ◽  
Production Losses

In the manufacturing process Bus and Mini Bus, a lot of the raw materials required. Raw materials are stored at many warehouses (especially on Body PT. XYZ Malang). Materials / goods are highly vulnerable to lost or stolen. The most influential factor in it is the counting system inventory / materials and administration. These changes will have an impact on the process of goods more accurate calculation based on the demand of production. Losses will have a greater likelihood of being used if the system can not address the calculation of the goods/raw materials better.And administration system that can cope with the calculation of the goods/raw materials are better here is a system that can calculate expenditures for production based on the incoming bill alone, and can calculate the receipt of goods in accordance with the letter received by the supplier. The system can also provide reports based on existing transactions during a certain period.With the inventory system and the administration is then the difference between the goods that previously occurred can be minimized and raw material inventory accounting system can work better.

scholarly journals ANALYSIS OF THE FUCTIONAL ROLE OF RICE MILLING COMPANY ON THE WELFARE OF RICE FARMERS IN THE SUB-DISTRICT BUAY MADANG TIMUR DISTRICT OKU TIMUR

Jurnal AKTUAL ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 47
Author(s):  
Aisah Aisah
Keyword(s):  
Large Scale ◽  
Raw Materials ◽  
Small Scale ◽  
Functional Roles ◽  
Medium Scale ◽  
Rice Farmers ◽  
Result Show ◽  
Rice Milling ◽  
Processing And Storage

Rice Milling Company is rice industry’s oldest and largest classified in Indonesia, which is able to absorb more than 10 million workers, handles more than 40 million tons of grain.  Rice Milling Company agro-industy is the central point, because this is where the main product is obtained in the form of rice and raw materials for advanced processing of food and industrial products.  Rice Miling Unit in the district of OKU Timur there is some skala, ranging form small-scale, medium-scale to large-scale.  Fuctional benefits of each different scale milling is also different.  The average rice farmers often sell gabahnya to the rice milling unit closest to the place residence, whether it is large-scale, medium and small.  Rice produced by the milling-grinding different quality.  Usually when a large-scale millimg yield of rice is cleaner than the other scale.  But it does not become a reference for milling grain milling usually depends on consumer demand.  The purpose of the study are : 1.  To determine levels of volume (tonnage) and the retention time of each service fuctional rice storage (barns) wich carried a different scale rice milling unit.  2.  To determine differences in the bebefits of economic transactions received by farmers and rice millers of different scale of business, especially when seen from the level of the milling costs, the purchase price of rice by rice milling unit, and the quality of milling services and service scale.  The result show that : the fuctional role of each is different milling.  Large-scale milling has three fuctional roles are : Processing, storage and distribution.  Medium-scale miling functional has two roles, namely : processing and distribution.  While small-scale rice milling unit has only two functional roles are : processing and storage.

scholarly journals PENGENDALIAN PERSEDIAAN BAHAN BAKU DALAM PROSES PRODUKSI DENGAN MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY (EOQ)

2019 ◽  
Vol 1 (2) ◽  
pp. 415-423
Author(s):  
Elia Rahayu R ◽  
Nor Norisanti ◽  
Acep Samsudin
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Economic Order Quantity ◽  
Economic Order ◽  
Order Quantity ◽  
Analysis Method ◽  
Inventory Cost ◽  
Total Inventory ◽  
The Difference ◽  
Quantitative Descriptive

The purpose of this study is to control the supply of raw materials using the Economic Order Quantity (EOQ) method in Tahu Nugraha Jaya Sukabumi UKM. The data analysis method used is quantitative descriptive to describe and describe the data to be examined and then processed using EOQ. This study uses the EOQ method to determine the total inventory cost. The data needed in this study are the number of purchases of raw materials, the amount of use of raw materials, storage costs, and ordering costs. The results of this study indicate that by applying the EOQ method can further optimize the supply of raw materials by minimizing raw materials with increased inventory. With the application of the Economic Order Quantity (EOQ) method it shows more efficient than conventional methods of the company. Conclusions, seen from the difference in the TIC of the two methods, the more efficient method is the Economic Order Quantity (EOQ) method that is equal to 244,392.94 while the calculation used by the company is 374,325. so that it can be obtained that there is a difference between the Company TIC and the EIC method TIC. Keywords: Raw Material Inventory, Production Process

scholarly journals Cambridge Servicemen’s Memorial (Breuer, 1945): espacio público para el recuerdo

2019 ◽  
Vol 6 (2) ◽  
pp. 27
Author(s):  
Salvador José Sanchís Gisbert ◽  
Pedro Ponce Gregorio ◽  
Ignacio Peris Blat
Keyword(s):  
Public Space ◽  
Large Scale ◽  
Residential Buildings ◽  
Small Scale ◽  
First Year ◽  
Residential Land ◽  
The Public ◽  
International Recognition ◽  
The World ◽  
Strong Commitment

Marcel Breuer was in the first year of architectural technicians to graduate from Bauhaus School. The peculiar education he received there allowed him to explore the concept of design in its broadest sense. In his European stage we find, on the most private and small scale, unique solutions for furniture. In his first American stage we see a strong commitment with solutions related to the residential land and, when he earned international recognition, he developed large scale solutions for his public non-residential buildings and urban equipments in locations all over the world. It is strange to see that an architect like him did not have the opportunity to materialize any of his proposals associated with the public space. The 1945 Cambridge Servicemen’s Memorial project, also known as the Memorial War, is the most significant one he developed in his last years in Cambridge. Had it been built, it would have been a valuable example of modernity and contemporary reinterpretation of the monument in the public space.

Optimal Design and Techno-Economic Analysis for Corncob Particles Briquettes: A Literature Review of the Utilization of Agricultural Waste and Analysis Calculation

2021 ◽  
Author(s):  
Asep Bayu Dani Nandiyanto ◽  
Nissa Nur Azizah ◽  
Gabriela Chelvina Santiuly Girsang
Keyword(s):  
Optimal Design ◽  
Literature Review ◽  
Economic Analysis ◽  
Large Scale ◽  
Net Present Value ◽  
Raw Materials ◽  
Agricultural Waste ◽  
Raw Material ◽  
Variable Cost ◽  
Scale Production

Corncob is usually disposed of directly as waste, creating problems in the environment, while it can be converted into valuable materials. This research aimed to evaluate the literature review on briquette production from agricultural waste (using non-binder and cold press with a binder) and the current works on techno-economic analysis, to propose an optimal design for the production of briquette from corncob waste, and to perform a techno-economic analysis based on the selected optimal processing method. The engineering perspective based on stoichiometry and mass balance showed the potential corncob briquette manufacture in both home and large scales due to the possible use of inexpensive and commercially available equipment and raw materials. The economic perspective [based on several economic evaluation factors (i.e., gross profit margin, payback period, break-even point, cumulative net present value, return of investment, internal rate return, and profitability index) under ideal and non-ideal conditions by considering internal (i.e., sales, raw materials, utilities, and variable cost) and external aspects (i.e., tax)] confirmed the prospective development of the project in the large-scale production with a lifetime of more than 18 years. The main issue in the project is the raw material (i.e. tapioca flour), giving the most impact on the project’s feasibility. Even in severe conditions, the project is feasible. The great endurance was also confirmed in the case of a higher tax rate. This study demonstrates the importance of producing corncob-based briquettes for improving the economic value and giving alternatives for problem solvers in the utilization of agricultural waste.

Will Different Scales Impact on Design Collaboration in 3D Virtual Environments?

2012 ◽  
pp. 185-198
Author(s):  
Jerry Jen-Hung Tsai ◽  
Jeff WT Kan ◽  
Xiangyu Wang ◽  
Yingsiu Huang
Keyword(s):  
Virtual Environments ◽  
Large Scale ◽  
Protocol Analysis ◽  
Small Scale ◽  
Design Collaboration ◽  
The Difference ◽  
Communication Control ◽  
The Impact ◽  
3D Virtual Environments ◽  
Electronic Circuit Design

This chapter presents a study on the impact of design scales on collaborations in 3D virtual environments. Different domains require designers to work on different scales; for instance, urban design and electronic circuit design operate at very different scales. However, the understanding of the effects of scales upon collaboration in virtual environment is limited. In this chapter, the authors propose to use protocol analysis method to examine the differences between two design collaboration projects in virtual environments: one large scale, and another small scale within a similar domain. It shows that the difference in scale impacted more on communication control and social communication.

Sign in / Sign up

Export Citation Format

Share Document