scholarly journals SIRKULASI TERMINAL PENUMPANG KAPAL LAUT

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
Etsa Purnama Sari ◽  
Emilya Kalsum
Keyword(s):  
Carrying Capacity ◽  
Lower Cost ◽  
Effective Means ◽  
Circulation Pattern ◽  
Long Distance ◽  
Transportation Demand ◽  
Wide Range ◽  
Sea Transportation

Wilayah Indonesia yang terdiri dari pulau dan perairan menjadikan angkutan laut menjadi salah satu sarana transportasi yang cukup efektif di negara ini. Daya angkut yang besar dan beragam serta biaya yang lebih murah dengan jarak jangkauan yang luas, membuat sarana ini banyak diminati oleh masyarakat sekaligus juga merupakan pendukung utama perkembangan kehidupan sosial budaya dan roda perekonomian. Untuk mendukung proses transportasi laut ini perlu sarana berupa pelabuhan. Pelabuhan dalam melakukan pelayanan terhadap kapal memiliki beberapa fasilitas pokok dan penunjang yang wajib dimiliki. Salah satunya adalah terminal penumpang kapal laut dengan berbagai kegiatan di dalamnya untuk kedatangan maupun keberangkatan. Masalah ketidaknyamanan dalam berkegiatan, jauhnya akses sirkulasi antara satu kegiatan dengan kegiatan kegiatan embarkasi dan debarkasi yang tidak teratur, pembagian jalur sirkulasi penumpang dan pengantar penumpang yang tidak jelas seringkali muncul akibat sirkulasi yang tidak direncanakan dengan baik pada terminal penumpang kapal laut. Bahkan tidak jarang dapat menimbulkan adanya calo tiket hingga adanya penumpang tanpa tiket yang dapat masuk ke dalam kapal hingga kapal berlayar. Perencanaan sebuah sirkulasi yang tepat pada terminal penumpang kapal laut memerlukan kajian terhadap unsur-unsur sirkulasi seperti pencapaian, pola sirkulasi, jalur sirkulasi, serta bentuk ruang sirkulasi. Kajian unsur-unsur ini selanjutnya diselidiki melalui penelusuran masalah dengan analisis deskriptif melalui penggambaran objek penelitian yang terdapat pada Terminal Penumpang Pelabuhan International Yokohama, Terminal Penumpang Pelabuhan Kobe dan Terminal Penumpang Pelabuhan Osanbashi Hall As one of the largest archipelago country, sea transportation acts as one of the most effective means of transportation in Indonesia. Large and diverse carrying capacity, lower cost with wide range of distances, are factors which making sea transportation demand is quite high in public as well as a major proponent of development of social, cultural, and economy. Thus, to support this means of transportation, facility in form of port is needed. A port must have some basic and support facilities, which includes ship passenger terminal to accommodate arrival of departure of passengers. Problems which usually occur in ship passenger terminal caused by poor planning of circulation are: discomfort in activities, long distance of circulations which connect one activity to another, disorganized embarkation and disembarkation, and confusing distribution of passengers and passenger’s comperes’ pathways. From those conditions, sometimes it gives opportunity for ticket brokers and passengers without tickets who could board ships without proper requirements. A proper planning of circulation requires analysis of elements of circulation which includes entrance, circulation pattern, circulation path, and form of circulation space. Furthermore, such elements were studied through problem seeking, then descriptively analyze through research’s object depiction from Yokohama International Passenger Terminal, Kobe Port Terminal, and Osanbashi Hall Passenger Terminal

The State versus the People

2020 ◽  
Author(s):  
Matthew Rendle
Keyword(s):  
French Revolution ◽  
Effective Means ◽  
State Control ◽  
Scarce Resources ◽  
Soviet State ◽  
The People ◽  
Wide Range ◽  
Complex Picture ◽  
The Military

This book provides the first detailed account of the role of revolutionary justice in the early Soviet state. Law has often been dismissed by historians as either unimportant after the October Revolution amid the violence and chaos of civil war or even, in the absence of written codes and independent judges, little more than another means of violence. This is particularly true of the most revolutionary aspect of the new justice system, revolutionary tribunals—courts inspired by the French Revolution and established to target counter-revolutionary enemies. This book paints a more complex picture. The Bolsheviks invested a great deal of effort and scarce resources into building an extensive system of tribunals that spread across the country, including into the military and the transport network. At their peak, hundreds of tribunals heard hundreds of thousands of cases every year. Not all ended in harsh sentences: some were dismissed through lack of evidence; others given a wide range of sentences; others still suspended sentences; and instances of early release and amnesty were common. This book, therefore, argues that law played a distinct and multifaceted role for the Bolsheviks. Tribunals stood at the intersection between law and violence, offering various advantages to the Bolsheviks, not least strengthening state control, providing a more effective means of educating the population on counter-revolution, and enabling a more flexible approach to the state’s enemies. All of this adds to our understanding of the early Soviet state and, ultimately, of how the Bolsheviks held on to power.

scholarly journals Gamma models for estimating the odds ratio for a skewed biomarker measured in pools and subject to errors

Biostatistics ◽  
2019 ◽  
Author(s):  
Dane R Van Domelen ◽  
Emily M Mitchell ◽  
Neil J Perkins ◽  
Enrique F Schisterman ◽  
Amita K Manatunga ◽  
...  
Keyword(s):  
Odds Ratio ◽  
Adjusted Odds Ratio ◽  
Lower Cost ◽  
Cost Effective ◽  
Ratio Estimation ◽  
Statistical Efficiency ◽  
Function Model ◽  
Processing Error ◽  
Wide Range ◽  
Pooled Samples

SUMMARYMeasuring a biomarker in pooled samples from multiple cases or controls can lead to cost-effective estimation of a covariate-adjusted odds ratio, particularly for expensive assays. But pooled measurements may be affected by assay-related measurement error (ME) and/or pooling-related processing error (PE), which can induce bias if ignored. Building on recently developed methods for a normal biomarker subject to additive errors, we present two related estimators for a right-skewed biomarker subject to multiplicative errors: one based on logistic regression and the other based on a Gamma discriminant function model. Applied to a reproductive health dataset with a right-skewed cytokine measured in pools of size 1 and 2, both methods suggest no association with spontaneous abortion. The fitted models indicate little ME but fairly severe PE, the latter of which is much too large to ignore. Simulations mimicking these data with a non-unity odds ratio confirm validity of the estimators and illustrate how PE can detract from pooling-related gains in statistical efficiency. These methods address a key issue associated with the homogeneous pools study design and should facilitate valid odds ratio estimation at a lower cost in a wide range of scenarios.

Triazole, Benzotriazole, and Naphthotriazole as Corrosion Inhibitors for Brass

CORROSION ◽  
1976 ◽  
Vol 32 (10) ◽  
pp. 414-417 ◽  
Author(s):  
R. WALKER
Keyword(s):  
Corrosion Inhibitors ◽  
Lower Cost ◽  
Solution Ph ◽  
Inhibitor Efficiency ◽  
Wide Range ◽  
Better Than

Abstract The use of triazole, benzotriazole, and naphthotriazole as corrosion inhibitors for brass is briefly reviewed. The corrosion of 70/30 brass immersed in a wide range of solutions is reported both with and without the inhibitors. The inhibitor efficiency of benzotriazole is given as a function of the solution pH and the concentration used. Triazole was only effective in mildly corrosive solutions and benzotriazole and naphthotriazole were much better. Generally naphthotriazole was better than benzotriazole but is much more expensive and a higher concentration of benzotriazole can give the same protection as naphthotriazole at a much lower cost.

Future trends in diagnosis using laboratory-on-a-chip technologies

Parasitology ◽  
1999 ◽  
Vol 117 (7) ◽  
pp. 191-203 ◽  
Author(s):  
M. S. TALARY ◽  
J. P. H. BURT ◽  
R. PETHIG
Keyword(s):  
Gene Expression ◽  
Lower Cost ◽  
Building Blocks ◽  
Cancer Diagnostics ◽  
Future Trends ◽  
Biotechnological Applications ◽  
Environmental Testing ◽  
Current State ◽  
Microelectronic Fabrication ◽  
Wide Range

There has been an enormous growth in the development of biotechnological applications, where advances in the techniques of microelectronic fabrication and the technologies of miniaturization and integration in semiconductor industries are being applied to the production of Laboratory-on-a-Chip devices. The aim of this development is to create devices that will perform the same processes that are currently carried out in the laboratory in reduced timescales, at a lower cost, requiring less reagents, and with a greater resolution of detection and specificity. The expectations of this Laboratory-on-a-Chip revolution is that this technology will facilitate rapid advances in gene discovery, genetic mapping and gene expression with broader applications ranging from infectious diseases and cancer diagnostics to food quality and environmental testing. A review of the current state of development in this field reveals the scale of the ongoing revolution and serves to highlight the advances that can be perceived in the development of Laboratory-on-a-Chip technologies. Since miniaturization can be applied to such a wide range of laboratory processes, some of the sub-units that can be used as building blocks in these devices are described, with a brief description of some of the fabrication processes that can be used to create them.

A method for correcting acoustic finite-difference amplitudes for elastic effects

Geophysics ◽  
2014 ◽  
Vol 79 (4) ◽  
pp. T243-T255 ◽  
Author(s):  
James W. D. Hobro ◽  
Chris H. Chapman ◽  
Johan O. A. Robertsson
Keyword(s):  
Wave Equation ◽  
Finite Difference ◽  
Effective Means ◽  
Cost Effective ◽  
P Wave ◽  
S Waves ◽  
Velocity Models ◽  
Acoustic Simulation ◽  
Wide Range ◽  
Elastic Simulation

We present a new method for correcting the amplitudes of arrivals in an acoustic finite-difference simulation for elastic effects. In this method, we selectively compute an estimate of the error incurred when the acoustic wave equation is used to approximate the behavior of the elastic wave equation. This error estimate is used to generate an effective source field in a second acoustic simulation. The result of this second simulation is then applied as a correction to the original acoustic simulation. The overall cost is approximately twice that of an acoustic simulation but substantially less than the cost of an elastic simulation. Because both simulations are acoustic, no S-waves are generated, so dispersed converted waves are avoided. We tested the characteristics of the method on a simple synthetic model designed to simulate propagation through a strong acoustic impedance contrast representative of sedimentary geology. It corrected amplitudes to high accuracy for reflected arrivals over a wide range of incidence angles. We also evaluated results from simulations on more complex models that demonstrated that the method was applicable in realistic sedimentary models containing a wide range of seismic contrasts. However, its accuracy was reduced for wide-angle reflections from very high impedance contrasts such as a shallow top-salt interface. We examined the influence of modeling at coarse grid resolutions, in which converted S-waves in the equivalent elastic simulation are dispersed. These results provide some validation for the accuracy of the method when applied using finite-difference grids designed for acoustic modeling. The method appears to offer a cost-effective means of modeling elastic amplitudes for P-wave arrivals in a useful range of velocity models. It has several potential applications in imaging and inversion.

Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction

2006 ◽  
Vol 129 (1) ◽  
pp. 58-65 ◽  
Author(s):  
B. Scott Kessler ◽  
A. Sherif El-Gizawy ◽  
Douglas E. Smith
Keyword(s):  
Finite Element ◽  
Effective Means ◽  
Element Model ◽  
Operating Conditions ◽  
Behavior Prediction ◽  
Element Analysis ◽  
Material Models ◽  
Rheological Models ◽  
Wide Range ◽  
Novel Method

The accuracy of a finite element model for design and analysis of a metal forging operation is limited by the incorporated material model’s ability to predict deformation behavior over a wide range of operating conditions. Current rheological models prove deficient in several respects due to the difficulty in establishing complicated relations between many parameters. More recently, artificial neural networks (ANN) have been suggested as an effective means to overcome these difficulties. To this end, a robust ANN with the ability to determine flow stresses based on strain, strain rate, and temperature is developed and linked with finite element code. Comparisons of this novel method with conventional means are carried out to demonstrate the advantages of this approach.

scholarly journals Selenium supplementation: does soil supplementation help and why?

2003 ◽  
Vol 62 (2) ◽  
pp. 393-397 ◽  
Author(s):  
John R. Arthur
Keyword(s):  
Effective Means ◽  
Careful Consideration ◽  
Selenium Supplementation ◽  
Physiological Changes ◽  
Disease Treatment ◽  
Hormone Synthesis ◽  
Metabolic Functions ◽  
Wide Range ◽  
The Uk ◽  
Se Status

There are now concerns that dietary Se intake is inadequate for the population in the UK and parts of Europe. Many different methods can be proposed to deal with this problem. Experience from Finland suggests that the addition of Se to fertiliser is a safe and effective means of increasing the intake of the micronutrient in the human population. However, careful consideration needs to be given to the potential consequences of increasing Se intake. It is important to understand the biochemical and physiological changes that may occur with any increase in Se intake within the UK population. Se is an essential component of at least twenty functional proteins within mammals. These proteins are essential for a range of metabolic functions, including antioxidant activity, thyroid hormone synthesis and immune function. Thus, any increase in Se intake has the potential to influence in a wide range of factors that may impinge on the incidence of chronic disease. Treatment of soil with Se-supplemented fertiliser will certainly increase total Se in food products derived from areas where this treatment is in place. Consumption of such foods will increase Se status in many populations where the existing intake does not meet requirements. If the increases in Se intake are not toxic the overall consequences have the potential to be beneficial.

scholarly journals The effect of enriched cyclopoid copepods on the coloration and feeding rate of Betta splendens

2021 ◽  
Vol 869 (1) ◽  
pp. 012007
Author(s):  
A Yuslan ◽  
N Nasir ◽  
H Suhaimi ◽  
A Arshad ◽  
N W Rasdi
Keyword(s):  
Rice Bran ◽  
Feeding Rate ◽  
Effective Means ◽  
B Value ◽  
Proximate Analysis ◽  
Betta Splendens ◽  
A Value ◽  
Wide Range ◽  
Significant Difference ◽  
L Value

Abstract Copepods with a wide range of sizes, species, and nutritional compositions are preferred as live food for rearing of Betta splendens larvae. This research focuses on evaluating the efficiency of copepod enrichment diets in improving the coloration and feeding rate of B. splendens. Copepod were enriched with Chlorella sp. (T1), capsicum (T2), mixed vegetable (carrot + spinach), (T3), yeast (T4) and rice bran (T5) in 24 hours prior the feeding tests. As a result, proximate analysis of enriched-copepods showed that T1 (70.88±0.41) has highest protein content and T5 (22.01±0.59) has the highest lipid content. The specific growth rate and survival rate of B. splendens was highest in the treatment T1 (2.56±0.07%; 91.11±1.92%) and followed closely by T3 (2.49±0.51%; 85.55±8.39%). Feeding rate, T3 (70.08±3.88%) presented highest rate compared to other treatments. The different enrichment diets used were significantly impact the coloration test on body of L* value (P=0.001, P<0.05), T3 (66.11±3.60) appeared darker in color in contrast to others. As for a* value, the coloration was not impacted with the use of different enrichment on copepods (P=0.158, P>0.05) was detected for T1 (2.84±0.73) that gave a redder shade than other treatments did. T3 (2.40±0.30) exerted a more yellowish shade than the rest for b* value with a significant difference (P=0.015, P<0.05). The current study demonstrates that, rice bran, capsicum and mixed vegetable enrichment (carrot and spinach) have the potential to be an effective means of increasing B. splendens coloring and feeding rate. This potential diet can be further used as a substitution to artificial foods in producing sustainable culture of ornamental fish in the aquaculture industry.

The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces

2005 ◽  
Vol 128 (2) ◽  
pp. 345-350 ◽  
Author(s):  
Y. Feldman ◽  
Y. Kligerman ◽  
I. Etsion ◽  
S. Haber
Keyword(s):  
Carrying Capacity ◽  
Reynolds Equation ◽  
Stokes Equations ◽  
Surface Texturing ◽  
Laser Surface Texturing ◽  
Physical Parameters ◽  
Load Carrying Capacity ◽  
Wide Range ◽  
Load Carrying ◽  
Parallel Surfaces

Microdimples generated by laser surface texturing (LST) can be used to enhance performance in hydrostatic gas-lubricated tribological components with parallel surfaces. The pressure distribution and load carrying capacity for a single three-dimensional dimple, representing the LST, were obtained via two different methods of analysis: a numerical solution of the exact full Navier-Stokes equations, and an approximate solution of the much simpler Reynolds equation. Comparison between the two solution methods illustrates that, despite potential large differences in local pressures, the differences in load carrying capacity, for realistic geometrical and physical parameters, are small. Even at large clearances of 5% of the dimple diameter and pressure ratios of 2.5 the error in the load carrying capacity is only about 15%. Thus, for a wide range of practical clearances and pressures, the simpler, approximate Reynolds equation can safely be applied to yield reasonable predictions for the load carrying capacity of dimpled surfaces.

The influence of floral morph ratios and low plant density on mating and fertility in a tristylous colonizing species

Botany ◽  
2018 ◽  
Vol 96 (8) ◽  
pp. 533-545 ◽  
Author(s):  
Christopher M. Balogh ◽  
Spencer C.H. Barrett
Keyword(s):  
Field Experiment ◽  
Seed Set ◽  
Plant Density ◽  
Pollen Limitation ◽  
Lythrum Salicaria ◽  
Long Distance ◽  
Experimental Conditions ◽  
Wide Range ◽  
Morph Ratios ◽  
Floral Morph

Sexual reproduction in heterostylous populations may be vulnerable to demographic conditions because of the small number of mating types in populations. Here, we investigate mating and fertility under natural and experimental conditions in tristylous Lythrum salicaria L., an invasive species that exhibits a wide range of floral morph ratios and demographic contexts. We grew 147 open-pollinated seed families from six populations with different morph structures to estimate intermorph mating (d). In a field experiment, we used progeny ratios from 47 spatially isolated individuals to estimate d, and measured the intensity of pollen limitation experienced by the morphs. The M- and S-morphs experienced high rates of d, regardless of population size or morph ratio. Estimates for the L-morph revealed low levels of intramorph mating in three dimorphic and two trimorphic populations, but near complete intramorph mating in a monomorphic population. Despite high levels of intermorph mating in the field experiment, the morphs experienced significant pollen limitation of fruit and seed set, but this did not differ in intensity among the morphs. Our field experiment demonstrates that although plant isolation was associated with pollen limitation of seed set, “long-distance” bee-mediated pollen flow served to maintain intermorph mating. Tristyly in L. salicaria is remarkably robust to the demographic variation associated with colonization.

Sign in / Sign up

Export Citation Format

Share Document