Bone Preparation from Embalmed Human Cadavers - A Retrieval and Curation Technique

Bone preparation involves soft tissue removal, maceration, bleaching and labelling. In the absence of a standardized methodology a large repository of human bones are lost, as most medical colleges do not process bones after the dissection of human cadavers. The present study therefore conducted with the aim of evaluating the least time-consuming and effective method of bone preparation from embalmed and wet specimens. The method used included a process of maceration, which involves soft tissue removal and then boiling the bones in 60 litres of water for 2 hours. The process of maceration was augmented by adding potassium hydroxide pellets (caustic potash mol. wt. 56.11) after 30 minutes of initiation of boiling; 200-250 gm in the case of male bones and 150 – 200 gm in the case of female bones. After maceration was complete, the bones were bleached by soaking them in 30 – 35 litres of hydrogen peroxide 30% w/v solution (mol. wt. 34.01) for 12-14 hours. The bleached bones were then washed with water and soaked in 30 -35 litres of acetone (extra pure mol. wt. 58.08, boiling point 55.5° – 56°C) for 12 hours to degrease them. The bones dried naturally by spreading them on blotting paper and subsequently painted with a mixture of half a litre of lacquer and half a litre of lacquer thinner. This study concluded that the preparation of bones using the above method was effective, fast, odourless, and good quality human bones for anatomical study resulted.