scholarly journals Analysis of Thin Wall Structures for Energy Absorption Applications by ABAQUS

10.29007/6w78 ◽  
2022 ◽  
Author(s):  
Cong Hoa Vu ◽  
Thi Hieu Thao Le ◽  
Phuoc Khanh Huy Nguyen

Crash-dynamics research has always concentrated significantly in the safety, survivability of passengers in a car crash. To identify the capability of energy absorption of a crash box, a thin-walled structure will be modeled and simulated by ABAQUS software. Investigate the influence of material, cross-sectional, thickness factors on the energy absorption capacity of the tube, using MCDM – Multi-Criteria Decision-Making to get the best option and testing the improvement while filling the tube with Foam material. In this study, beside the cross-sectional, aluminum alloys and steel materials and thickness are factors that influence the energy absorption evaluation criteria, the foam material with difference density are surveyed to compare effectiveness between the foam-filled and hollow crashboxes. The results show that the folds of the foam-filled tube after deformation along the compressive direction will be more continuous and stable. More, the higher foam density, the greater the energy absorption. This prevents the crashbox from deviating from the direction of the force, help directing the collapse of the tube, thereby improving energy absorption without significantly increasing the weight of the structure.

Author(s):  
Sean Jenson ◽  
Eboreime Ohioma ◽  
Muhammad Ali ◽  
Khairul Alam

Abstract Thin wall structures are primarily deployed in automotive chassis to increase the energy absorption capacity of the automobiles in the event of an accident. Researchers have delved into developing lighter structures for improving automobiles’ fuel efficiency with a challenge of maintaining or preferably exceeding the energy absorption properties of the structure. In this study, the work presented is a continuation of research conducted on exploring the effects of the introduction of cellular core in tubular structures under axial compressive loading. The crushing response of cellular core cross tube was numerically studied using ABAQUS/Explicit module. The characteristics such as deformation or collapsing modes, crushing/ reactive force, locking strain, energy curves, and specific energy absorbed were studied. The cellular core cross tube shows significant potential for reducing the weight of automobile structure while giving positive indication towards enhancing the specific energy absorption capacity.


Author(s):  
Eboreime Ohioma ◽  
Muhammad Ali ◽  
Khairul Alam

Thin wall structures are primarily deployed in automotive chassis to increase the energy absorption capacity of the automobiles in the event of an accident. Researchers have delved into developing lighter structures for improving automobiles’ fuel efficiency with a challenge of maintaining or preferably exceeding the energy absorption properties of the structure. In this study, the work presented is a continuation of research conducted on exploring the effects of the introduction of cellular core in tubular structures under axial compressive loading. The crushing response of cellular core hybrid tube was numerically studied using ABAQUS/Explicit module. The characteristics such as deformation or collapsing modes, crushing/ reactive force, locking strain, energy curves, and specific energy absorbed were studied. The cellular core hybrid tube shows significant potential for reducing the weight of automobile structure while giving positive indication towards enhancing the specific energy absorption capacity.


2018 ◽  
Vol 22 (4) ◽  
pp. 929-947 ◽  
Author(s):  
LL Yan ◽  
B Yu ◽  
B Han ◽  
QC Zhang ◽  
TJ Lu ◽  
...  

In this study, a closed-cell aluminum foam was filled into the interspaces of a sandwich panel with corrugated cores to form a composite structure. The novel structure is expected to have enhanced foam-filled cores with high specific strength and energy absorption capacity. An out-of-plane compressive load under low-velocity impact was experimentally and numerically carried out on both the empty and foam-filled sandwich panels as well as on the aluminum foam. It is found that the empty corrugated sandwich panel has poor energy absorption capacity due to the core member buckling compared to that of the aluminum foam. However, by the filling of the aluminum foam, the impact load resistance of the corrugated panel was increased dramatically. The loading-time response of the foam-filled panel performs a plateau region like the aluminum foam, which has been proved to be an excellent energy absorption material. Numerical results demonstrated that the aluminum foam filling can decrease the corrugated core member defects sensitivity and increase its stability dramatically. The plastic energy dissipation of the core member for the foam-filled panel is much higher than that of the empty one due to the reduced buckling wavelength caused by the aluminum foam filling.


2013 ◽  
Vol 315 ◽  
pp. 872-878 ◽  
Author(s):  
S. Kanna Subramaniyan ◽  
Shahruddin Mahzan ◽  
Mohd Imran Ghazali ◽  
Ahmad Mujahid Ahmad Zaidi ◽  
Prasath Kesavan Prabagaran

Foam-filled enclosures are very common in structural crashworthiness to increase energy absorption. However, very less research has been targeted on potential use of natural/recycled material reinforced foam-filled tubes. Therefore, an experimental investigation was performed to quantify energy absorption capacity of polyurethane (PU) composite foam-filled circular steel tubes under quasi-static axial loading. The thickness of the tubes was varied from 1.9, 2.9 and 3.6 mm. The tubes were filled with PU composite foam. The PU composite foam was processed with addition of kenaf plant fiber and recycled rubber particles that were refined at 80 mesh particulates into PU system. The density of PU resin was varied from 100, 200 and 300 kgm-3. The PU composite foam-filled tubes were crushed axially at constant speed in a universal testing machine and their energy absorption was characterized from the resulting load-deflection data. Results indicate that PU composite foam-filled tubes exhibited better energy absorption capacity than those PU foam-filled tubes and its respective empty tubes. Interaction effect between the tube and the foam and incorporation of filler into PU system led to an increase in mean crushing load compared to that of the unfilled PU foam or tube itself. Relatively, progressively collapse modes were observed for all tested tubes. Findings suggested that composite foam-filled tubes could be used as crashworthy member.


2014 ◽  
Vol 566 ◽  
pp. 586-592
Author(s):  
Steeve Chung Kim Yuen ◽  
Gerald Nurick ◽  
Sylvester Piu ◽  
Gadija Ebrahim

This paper presents the results of an investigation into the response of thin-walled square (60x60 mm and 76x76 mm) tubes made from mild steel filled with four different fillers; aluminium foam (Cymat 7%), two types of aluminium honeycomb and polyurethane foam to quasi-static and dynamic axial impact load. The energy absorption characteristics of the foam-filled tubes are compared to that of a hollow tube, through efficiency calculations. The tubular structures are subjected to axial impact load generated by drop masses of 320 kg and 390 kg released from a height ranging between 2.1 m to 4.1 m. Footage from a high speed camera is used to determine the average crush forces exerted by each specimen. The results show that the fillers have insignificant effects on the initial peak forces based on the quasi-static results but increase the overall mean crushed force. The findings also indicate that the fillers affect at times the size of the lobe formed thus compromising the energy absorption capacity of the tube.


Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4857
Author(s):  
Michal Rogala ◽  
Jakub Gajewski ◽  
Miroslaw Ferdynus

Crashworthiness of conical shells is known to depend on various factors. This study sets out to determine the extent to which the cross-sectional diameter contributes to their energy-absorbing properties. The object of the study was thin-walled aluminium tubes varying in upper diameter and wall thickness. The components were subjected to dynamic axial crushing kinetic energy equal to 1700 J. The numerical analysis was performed using Abaqus 6.14 software. The specific aim of the study was to determine the extent to which variable wall thickness affects the energy absorption capacity of the components under study. From the simulations, we have managed to establish a relationship between total energy absorption capacity and wall thickness. The results from the conducted analyses and the purpose-specific neural networks could provide the base for the future methodology for forecasting and optimisation of energy-absorbing systems.


Sign in / Sign up

Export Citation Format

Share Document