scholarly journals Pengaruh Lokasi Zeolit Alam Bayah terhadap Adsorpsi Amonium: Studi Kinetika dan Kesetimbangan

2021 ◽  
Vol 22 (1) ◽  
pp. 018-028
Author(s):  
Muhammad Hakiki ◽  
Muhammad Makiyi ◽  
Nuryoto Nuryoto ◽  
Rahmayetty Rahmayetty ◽  
Indar Kustiningsih ◽  
...  

ABSTRACT Household waste is one of the most significant contributors to wastewater that can pollute the environment, one of which is ammonium pollution. Ammonium pollution can be reduced by natural zeolite by using the adsorption method. This research aims to utilize natural zeolite as an adsorbent that can reduce ammonium levels in wastewater, determine which natural zeolite has the most significant adsorption power from 4 locations, determine natural zeolite characterization of Bayah. This study is also to create a model equilibrium equations and reaction kinetics from the adsorption method. The method used is the adsorption method, X-ray diffraction (XRD), Scanning Electron Microscope (SEM), and Brunauer-Emmett-Teller (BET). This study's results were that natural zeolites location 4 could adsorb 99.25% of ammonium and showed the highest adsorption capacity of ammonium. Characterization using XRD analysis obtained the types of zeolite mordenite, clinoptilolite, quartz, and heulandite. The surface area of Bayah natural zeolite in the 4th location is 46 m2/g. The suitable equilibrium model for the adsorption of ammonium by natural zeolites is the Freundlich model. The most suitable adsorption kinetics model for the adsorption of ammonium by Bayah natural zeolites is the pseudo-first-order model. Keywords: household waste, ammonium, eutrophication, natural zeolites   ABSTRAK Limbah rumah tangga adalah salah satu penyumbang limbah cair terbesar yang dapat mencemari lingkungan salah satunya pencemaran amonium. Pencemaran amonium dapat dikurangi dengan zeolit alam dengan menggunakan metode adsorpsi. Tujuan dari penelitian ini adalah menentukan zeolit alam yang memiliki daya adsorpsi terbesar dari 4 lokasi berbeda, melakukan karakterisasi zeolit alam Bayah, dan memodelkan persamaan kesetimbangan dan kinetika reaksi adsorpsi amonium. Karakterisasi zeolit dilakukan dengan analisis X-ray diffraction (XRD), Scanning Electron Microsope (SEM), dan luas permukaan material menggunakan model Brunauer-Emmett-Teller (BET). Hasil dari penelitian ini adalah zeolit alam lokasi 4 memiliki  kapasitas adsorpsi amonium paling besar, yaitu 9,25%. Adapun kapasitas adsorpsi amonium yang paling besar ditunjukkan oleh zeolit alam Bayah lokasi 4. Analisis XRD menunjukkan bahwa seluruh zeolit Bayah merupakan zeolit bertipe mordenit, klinoptilolit, dan heulandit dengan fasa pengotor quartz. Luas permukaan zeolit alam Bayah lokasi 4 sebesar 46 m2/g. Model kesetimbangan yang sesuai untuk adsorpsi amonium oleh zeolit alam Bayah yaitu model Freundlich. Model kinetika adsorpsi yang paling sesuai untuk adsorpsi amonium oleh zeolit alam Bayah yaitu model kuasi orde satu. Kata Kunci: limbah rumah tangga, amonium, eutrofikasi, zeolit alam

2021 ◽  
Vol 55 (1-2) ◽  
pp. 169-175
Author(s):  
KIMBERLY P. VIRON ◽  
ANILYN M. FALCATAN ◽  
JULIUS L. LEAÑO JR.

Cellulose regeneration is a facile approach to produce biopolymer/clay composites with improved physical properties. In this study, a cellulose/montmorillonite nanocomposite was prepared using a novel ionic liquid, 1-butyl-3-ethylimidazolium bromide ([BEIm]Br). Montmorillonite clay was modified using cetyltrimethylammonium bromide (CTAB) and was characterized using X-ray diffraction (XRD) analysis, which revealed the substitution of cetyltrimethylammonium (CTA+) cations in the clay gallery. The exfoliation-adsorption method was used to prepare the cellulose/montmorillonite nanocomposites, and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) analyses confirmed the successful dispersion of cellulose into the clay matrix. Thermogravimetric analysis (TGA) further revealed the optimum thermal stability of the nanocomposite was achieved with 4 wt% montmorillonite, which provided a white cellulose/montmorillonite nanocomposite.


Chemija ◽  
2019 ◽  
Vol 30 (2) ◽  
Author(s):  
Andrius Laurikėnas ◽  
Fatma Yalçin ◽  
Robertas Žilinskas ◽  
Ayse Uztetik Morkan ◽  
Albinas Žilinskas ◽  
...  

The solvothermal synthesis between Me(NO3)x ∙ yH2O (Mex+ = Fe3+, Ni2+, Mn2+, Co2+, Cu2+) and respectively 4-nitrosalycilic (4NSA) and 5-sulfosalicylic (5SSA) acids produced hybrid organic-inorganic compounds composed of Mex+ ions and organic fragments which include three different functional groups, carboxylic, hydroxyl and sulfonic, each coordinated to the Mex+ ions. The phase and chemical composition, microstructure and properties of Me2(H2O)4(5SSA)3·DMF and Me2(H2O)4(4NSA)2·DMF (DMF – dimethylformamide) hybrid compounds were evaluated and discussed. The synthesised materials were characterised by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) spectroscopy. The catalytic properties of the obtained compounds were also investigated.


2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Hassan Ilyas ◽  
Ishtiaq A. Qazi ◽  
Wasim Asgar ◽  
M. Ali Awan ◽  
Zahir-ud-din Khan

Pure and Ag-TiO2nanoparticles were synthesized, with the metallic doping being done using the Liquid Impregnation (LI) method. The resulting nanoparticles were characterized by analytical methods such as scanning electron micrographs (SEMs), Energy Dispersive Spectroscopy (EDS), and X-ray diffraction (XRD). XRD analysis indicated that the crystallite size ofTiO2was 27 nm to 42 nm while the crystallite size of Ag-TiO2was 11.27 nm to 42.52 nm. The photocatalytic activity of pureTiO2and silver dopedTiO2was tested by photocatalytic degradation ofp-nitrophenol as a model compound. Ag-TiO2nanoparticles exhibited better results (98% degradation) as compared to pureTiO2nanoparticles (83% degradation) in 1 hour for the degradation ofp-nitrophenol. Ag-TiO2was further used for the photocatalytic degradation of 2,4-dichlorphenol (99% degradation), 2,5-dichlorophenol (98% degradation), and 2,4,6-trichlorophenol (96% degradation) in 1 hour. The degree of mineralization was tested by TOC experiment indicating that 2,4-DCP was completely mineralized, while 2,5-DCP was mineralized upto 95 percent and 2,4,6-TCP upto 86 percent within a period of 2 hours.


2019 ◽  
Vol 969 ◽  
pp. 169-174
Author(s):  
R. Sivanand ◽  
S. Chellammal ◽  
S. Manivannan

In this paper, the effect of size variation of cadmium sulphide nanocrystallites which have been prepared by precipitation method is analyzed. These prepared samples were studied using X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Energy dispersive analysis of spectroscopy (EDAX) techniques. SEM analysis represents the morphological nature of prepared samples and EDAX indicates the confirmation of elements present in the sample. XRD analysis determines the size of the samples and identifies the structure using miller indices (h k l values) of the nanocrystallies matches with JCPDS. From the XRD analysis, the size variation which depends on dopant, capping agent are discussed and corresponding results are reported in this paper.


2012 ◽  
Vol 616-618 ◽  
pp. 1732-1735 ◽  
Author(s):  
Xi Hai Shen ◽  
Yu Gang Zheng ◽  
Liang Chang ◽  
Jin Jia Guo ◽  
Song Bin Ye ◽  
...  

Aiming at the glass-to-metal seals serving in the Solar Thermal Power (STP), glass-to-metal vacuum brazed joints were studied. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were performed to examine the microstructure and element contents of interface seam on the glass-to-metal vacuum brazed joints. Also, the compositional concentration of the interface seam was measured by using energy dispersive spectroscopy (EDS).


2010 ◽  
Vol 173 ◽  
pp. 102-105 ◽  
Author(s):  
Khairul Arifah Saharudin ◽  
Srimala Sreekantan

In this paper, anodization of Ti foil was carried out in ethylene glycol (EG) containing 5 wt% NH4F solution and 0 to 1.5 wt% of water at 50 V for 60 min. The pH of the bath was kept constant at ~pH7. The crystal structure was studied by X-Ray Diffraction (XRD) analysis, and the morphology was observed via field emission scanning electron microscopy (FESEM). TiO2 nanotube with aspect ratio of 100 was obtained in EG containing less than 1wt % water. The nanotubes wall was very smooth. Increasing the water content > 1wt % results in short nanotubes of approximately 6.2μm with aspect ratio of 62. As anodized, nanotubes were amorphous and annealed at 400 °C promote 100 % anatase phase. Photocatalytic activity of the nanotubes produced at different water content was also evaluated by the degradation of methyl orange and the detail of the observation was discussed thoroughly in this paper.


2014 ◽  
Vol 1019 ◽  
pp. 302-310 ◽  
Author(s):  
Kalenda Mutombo ◽  
Christina Kgomo ◽  
P. Rossouw

The interaction between the Ti6Al4V alloy and the mould materials was investigated. The alpha-case was characterized by Vickers hardness tester, optical and scanning electron microscopy equipped with electron dispersive X-ray spectrometry (EDX). X-ray diffraction (XRD) analysis was performed on as cast and on YFSZ or YZ-Blended face-coats. From the experimental results, a distinct alpha-case formation was revealed. The YFSZ led to a thicker and harder alpha-case than the YZ-Blended face-coat. The EDX revealed the presence of Zr and Si elements in both alpha-cases. Therefore, from experimental results and thermodynamic calculations, pure ZrO2and SiO2may react with Ti.


2013 ◽  
Vol 738 ◽  
pp. 26-29 ◽  
Author(s):  
Ting Ting Yan ◽  
Yong Shun Cui ◽  
Qing Hua Chen

Hydroxyapatite is well used as bone repair materials, due to its properties that can be combined with strontium to improve mechanical property and degradation property. In this article, hydroxyapatite whiskers with different amount of doped strontium were prepared with diammonium phosphate, calcium nitrate and strontium nitrate at 94 °C. Fourier transform infrared spectroscopy (FTIR) was used to identify the functional groups. X-ray diffraction (XRD) analysis was carried out to study the phase composition and crystallinity of the whisker. The morphology of the whiskers was characterized by scanning electron microscope (SEM). It was indicated that strontium can be doped in hydroxyapatite with proper process and then the strontium-doped hydroxyapatite whiskers were produced successfully.


2012 ◽  
Vol 620 ◽  
pp. 12-16 ◽  
Author(s):  
Abdul Rashid Jamaludin ◽  
Shah Rizal Kasim ◽  
Zainal Arifin Ahmad

The effects of calcium carbonate (CaCO3) addition on the physical properties of ZnO-based crystal glaze batches were investigated. Samples were fired at different gloss firing temperatures ranging from 1180-1220°C with 3 hours soaking at 1060°C crystallization temperature. X-ray diffraction (XRD) analysis identifiedthe crystal phase occurred as willemite (Zn2SiO4) and the scanning electron microscope (SEM) analysis indicated that willemite crystals are in the acicular needle like shape that formed spherulite. The intensities of willemite peaks decreased with CaCO3 addition and completely vanished at 5.0 wt% CaCO3. Varied formation of spherulites developed of the surface of crystal glaze as the flows of the glaze stretched further as the amount of CaCO3 increased.


2019 ◽  
Vol 4 (2) ◽  
pp. 668-673
Author(s):  
Rikson Siburian ◽  
Saur L Raja ◽  
Minto Supeno ◽  
Crystina Simanjuntak

Coconut shell is one of the potential biomass as carbon sources. Coconut shell is converted to charcoal through the carbonization process. The potential of charcoal from coconut shells can be synthesized into graphene. Graphene is a derivative of one of the carbon allotropes, namely graphite, where carbon is in the form of thin plates with sp2 orbitals arranged hexagonally. The process of making graphene which is coconut shell dried in the sun then pyrolysis into charcoal then mixed with activated carbon as a reducing agent at 600 ° C for 1 hour to produce graphene. The graphene produced is characterized by X-Ray Diffraction (XRD), Scanning Electron Microscope-Energy Dispersive X-Ray (SEM-EDX). The results by XRD analysis showed the resulting peaks were not sharp and slightly widened at the diffraction peaks at 24 ° and 44 °. The results of SEM-EDX analysis at 4000x magnification show the surface size and shape of the structure that is smaller, thinner and reduced buildup on the graphene structure. graphene that has been successfully synthesized was tested on a coin battery. The coin battery cathode which was replaced with graphene succeeded in turning on the light.  


Sign in / Sign up

Export Citation Format

Share Document