scholarly journals The Employability Skills of Engineering Students': Assessment at the University

2021 ◽  
Vol 14 (4) ◽  
pp. 119-134
Author(s):  
A. Muhammad Idkhan ◽  
◽  
Husain Syam ◽  
Sunardi Sunardi ◽  
Abdul Hafid Hasim ◽  
...  
Author(s):  
Umar Iqbal ◽  
Deena Salem ◽  
David Strong

The objective of this paper is to document the experience of developing and implementing a second-year course in an engineering professional spine that was developed in a first-tier research university and relies on project-based core courses. The main objective of this spine is to develop the students’ cognitive and employability skills that will allow them to stand out from the crowd of other engineering graduates.The spine was developed and delivered for the first time in the academic year 2010-2011 for first-year general engineering students. In the year 2011-2012, those students joined different programs, and accordingly the second-year course was tailored to align with the different programs’ learning outcomes. This paper discusses the development and implementation of the course in the Electrical and Computer Engineering (ECE) department.


2018 ◽  
Vol 6 (1) ◽  
Author(s):  
Chinweike Eseonu ◽  
Martin A Cortes

There is a culture of disengagement from social consideration in engineering disciplines. This means that first year engineering students, who arrive planning to change the world through engineering, lose this passion as they progress through the engineering curriculum. The community driven technology innovation and investment program described in this paper is an attempt to reverse this trend by fusing community engagement with the normal engineering design process. This approach differs from existing project or trip based approaches – outreach – because the focus is on local communities with which the university team forms a long-term partnership through weekly in-person meetings and community driven problem statements – engagement.


Mathematics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 662
Author(s):  
María Jesús Santos ◽  
Alejandro Medina ◽  
José Miguel Mateos Roco ◽  
Araceli Queiruga-Dios

Sophomore students from the Chemical Engineering undergraduate Degree at the University of Salamanca are involved in a Mathematics course during the third semester and in an Engineering Thermodynamics course during the fourth one. When they participate in the latter they are already familiar with mathematical software and mathematical concepts about numerical methods, including non-linear equations, interpolation or differential equations. We have focused this study on the way engineering students learn Mathematics and Engineering Thermodynamics. As students use to learn each matter separately and do not associate Mathematics and Physics, they separate each matter into different and independent compartments. We have proposed an experience to increase the interrelationship between different subjects, to promote transversal skills, and to make the subjects closer to real work. The satisfactory results of the experience are exposed in this work. Moreover, we have analyzed the results obtained in both courses during the academic year 2018–2019. We found that there is a relation between both courses and student’s final marks do not depend on the course.


2021 ◽  
Vol 11 (2) ◽  
pp. 56
Author(s):  
Saray Busto ◽  
Michael Dumbser ◽  
Elena Gaburro

In this article we present a case study concerning a simple but efficient technical and logistic concept for the realization of blended teaching of mathematics and its applications in theoretical mechanics that was conceived, tested and implemented at the Department of Civil, Environmental and Mechanical Engineering (DICAM) of the University of Trento, Italy, during the COVID-19 pandemic. The concept foresees traditional blackboard lectures with a reduced number of students physically present in the lecture hall, while the same lectures are simultaneously made available to the remaining students, who cannot be present, via high-quality low-bandwidth online streaming. The case study presented in this paper was implemented in a single University Department and was carried out with a total of n=1011 students and n=68 professors participating in the study. Based on our first key assumption that traditional blackboard lectures, including the gestures and the facial expressions of the professor, are even nowadays still a very efficient and highly appreciated means of teaching mathematics at the university, this paper deliberately does not want to propose a novel pedagogical concept of how to teach mathematics at the undergraduate level, but rather presents a technical concept of how to preserve the quality of traditional blackboard lectures even during the COVID-19 pandemic and how to make them available to the students at home via online streaming with adequate audio and video quality even at low internet bandwidth. The second key assumption of this paper is that the teaching of mathematics is a dynamic creative process that requires the physical presence of students in the lecture hall as audience so that the professor can instantaneously fine-tune the evolution of the lecture according to his/her perception of the level of attention and the facial expressions of the students. The third key assumption of this paper is that students need to have the possibility to interact with each other personally, especially in the first years at the university. We report on the necessary hardware, software and logistics, as well as on the perception of the proposed blended lectures by undergraduate students from civil and environmental engineering at the University of Trento, Italy, compared to traditional lectures and also compared to the pure online lectures that were needed as emergency measure at the beginning of the COVID-19 pandemic. The evaluation of the concept was carried out with the aid of quantitative internet bandwidth measurements, direct comparison of transmitted video signals and a careful analysis of ex ante and ex post online questionnaires sent to students and professors.


Author(s):  
A Gonzalez-Buelga ◽  
I Renaud-Assemat ◽  
B Selwyn ◽  
J Ross ◽  
I Lazar

This paper focuses on the development, delivery and preliminary impact analysis of an engineering Work Experience Week (WEW) programme for KS4 students in the School of Civil, Aerospace and Mechanical Engineering (CAME) at the University of Bristol, UK. Key stage 4, is the legal term for the two years of school education which incorporate GCSEs in England, age 15–16. The programme aims to promote the engineering profession among secondary school pupils. During the WEW, participants worked as engineering researchers: working in teams, they had to tackle a challenging engineering design problem. The experience included hands-on activities and the use of state-of-the-art rapid prototyping and advanced testing equipment. The students were supervised by a group of team leaders, a diverse group of undergraduate and postgraduate engineering students, technical staff, and academics at the School of CAME. The vision of the WEW programme is to transmit the message that everybody can be an engineer, that there are plenty of different routes into engineering that can be taken depending on pupils’ strengths and interests and that there are a vast amount of different engineering careers and challenges to be tackled by the engineers of the future. Feedback from the participants in the scheme has been overwhelmingly positive.


Author(s):  
Teresa Parra-Santos ◽  
José M. Molina Jordá ◽  
Gabriel Luna-Sandoval ◽  
Mariano Cacho-Perez ◽  
J. Rubén Pérez

This work involves the methodology used in the University of Valladolid for Mechanical Engineering students to learn Computational Fluid Dynamics playing an active role. Students pretend to be engineers in a consulting or design office carrying out a fluid mechanics scale down projects. Later they act as reviewers evaluating a project from a colleague. There is a deeper understanding of the topic when they need to discuss the strategies to accomplish the project, to write a technical report and finally to justify the evaluation of other works. Furthermore, they develop their critical thought, writing skills and synthesis capacity. Multimedia material from other institutions that review the concepts learned in the course can be a suitable way to improve the understanding of concepts.


2015 ◽  
Vol 35 (3) ◽  
pp. 121-128 ◽  
Author(s):  
Miguel Aizpun ◽  
Diego Sandino ◽  
Inaki Merideno

<p>In addition to the engineering knowledge base that has been traditionally taught, today’s undergraduate engineering students need to be given the opportunity to practice a set of skills that will be demanded to them by future employers, namely: creativity, teamwork, problem solving, leadership and the ability to generate innovative ideas. In order to achieve this and educate engineers with both in-depth technical knowledge and professional skills, universities must carry out their own innovating and find suitable approaches that serve their students. This article presents a novel approach that involves university-industry collaboration. It is based on creating a student community for a particular company, allowing students to deal with real industry projects and apply what they are learning in the classroom. A sample project for the German sports brand adidas is presented, along with the project results and evaluation by students and teachers. The university-industry collaborative approach is shown to be beneficial for both students and industry.</p>


1993 ◽  
Vol 7 (3) ◽  
pp. 141-147
Author(s):  
Jeffrey C. Hillman

The need for South African industry to attract black engineers has necessitated its involvement in their university preparation. This article describes a pre-university course for black engineering students at the University of the Witwatersrand. A summary of its alumni's results to date is provided together with some comparative data.


Sign in / Sign up

Export Citation Format

Share Document