scholarly journals Y Factory Study on Lean Production Management

Author(s):  
Yung-Chih Chen

Taiwan's small to the medium-sized traditional manufacturing industry is generally believed to have flourished in the 1970s due to the encouragement of the government to promote turning family living rooms into factories. With the hardworking attitude, these small factories were able to accumulate tiny good results and to converge into a significant force. Gradually, these family factories began to grow stronger, and they tried desperately to increase their productivity. They began to follow the model of standardization and mass production. However, did everything possible to reduce costs and to improve international competitiveness? In the study, we used Y Factory as an example to figure out their difficulties and achievements.

2017 ◽  
Vol 11 (2) ◽  
pp. 2364-2373 ◽  
Author(s):  
Yao Lin

China’s e-commerce industry has went through 21 years since China’s first e-commerce enterprise established in 1996. With the rapid development of Internet and communication technology, e-commerce has penetrated into enterprises’ production and people’s life, and continued to exert its great potential when combining with traditional manufacturing industry. There is no doubt that e-commerce has greatly increased the efficiency of society functions. This paper cards the courses and policy environment of e-commerce development in China, identifies four stages for China’s e-commerce development, which are “initial stage, accelerated stage, standardization stage and globalization stage”. At the same time, this paper describes three different characteristics of current China’s e-commerce and also summarizes five policy focus for e-commerce. Based on the previous analysis and descriptions, this paper puts forward conclusions that China's e-commerce sector will usher in a new round expansion on global scale, and the Chinese government will play a key and active role in promoting it. In addition, this paper warns these China’s e-commerce enterprises to actively prevent unknown risk from home and abroad in their business expansion, the government ought to listen to e-commerce companies to deal with their specific difficulties.


2019 ◽  
Vol 12 (3) ◽  
pp. 125-133
Author(s):  
S. V. Shchurina ◽  
A. S. Danilov

The subject of the research is the introduction of artificial intelligence as a technological innovation into the Russian economic development. The relevance of the problem is due to the fact that the Russian market of artificial intelligence is still in the infancy and the necessity to bridge the current technological gap between Russia and the leading economies of the world is coming to the forefront. The financial sector, the manufacturing industry and the retail trade are the drivers of the artificial intelligence development. However, company managers in Russia are not prepared for the practical application of expensive artificial intelligence technologies. Under these circumstances, the challenge is to develop measures to support high-tech projects of small and medium-sized businesses, given that the technological innovation considered can accelerate the development of the Russian economy in the energy sector fully or partially controlled by the government as well as in the military-industrial complex and the judicial system.The purposes of the research were to examine the current state of technological innovations in the field of artificial intelligence in the leading countries and Russia and develop proposals for improving the AI application in the Russian practices.The paper concludes that the artificial intelligence is a breakthrough technology with a great application potential. Active promotion of the artificial intelligence in companies significantly increases their efficiency, competitiveness, develops industry markets, stimulates introduction of new technologies, improves product quality and scales up manufacturing. In general, the artificial intelligence gives a new impetus to the development of Russia and facilitates its entry into the five largest world’s economies.


2018 ◽  
Vol 113 (4) ◽  
pp. 203-206
Author(s):  
Kathrin Maassen ◽  
Miriam Zacharias ◽  
Nejat Gökpinar ◽  
Dominic Hepner ◽  
Frank Hart

2019 ◽  
Vol 2 (1) ◽  
pp. 157-179
Author(s):  
Guidong Wang

Purpose With the increase of state capital, corporate total factor productivity (TFP) has a tendency to jump up at first and then slowly decrease. Generally, no significant “productivity paradox” can be observed in China’s manufacturing industry. With the increase of export density, corporate TFP also shows a trend of initial jump growth and subsequent slow decline. This paper aims to discuss these issues. Design/methodology/approach Using the 1996–2013 China Industrial Enterprise Database, this paper studies the monopolistic behavior of Chinese manufacturing enterprises through the measurement of TFP and corporate monopoly power. Findings Results show that China’s manufacturing monopoly enterprises are generally innovation-oriented rather than rent-seeking. However, there are certain differences between diversified types of monopoly enterprises: the ones with state capital are more inclined to innovate than those without, whereas the ones with export delivery value are more inclined to seek rent than those without. Originality/value Therefore, the government should implement differentiated policies for diversified types of monopoly enterprises, and do so in a targeted manner fully reflecting the containment of rent-seeking and the encouragement of innovation.


1974 ◽  
Vol 25 (2) ◽  
pp. 330-330
Author(s):  
F. de P. Hanika

1994 ◽  
Vol 23 (3) ◽  
pp. 213-222 ◽  
Author(s):  
F. O. Olasantan

Nigeria is an agricultural country, most of the vegetable needs of its people being provided by small farmers who seldom use high-input technology. Over the last 20 years, there has been an encouraging upward trend in inorganic fertilizer consumption, but it is very difficult to estimate how much of this chemical fertilizer is used for vegetable production. There is a need for information which could be used to monitor national trends in fertilizer use on vegetables so that the government can predict future needs and advise manufacturing industry and farmers accordingly. Although increases in the yield and mineral content of vegetables through the use of chemical fertilizers have been recorded, several problems still preclude their use. Possible ways to overcome the problem and benefit vegetable growers are discussed.


2016 ◽  
Vol 60 (2) ◽  
pp. 15-25
Author(s):  
V. Obolenskiy

The development of Russian foreign trade during the previous five years is analyzed. It is stated that, in terms of value, exports of services and imports of goods and services steadily grew during the first four years of the period under review. Exports of goods also rose during three years, but in 2014 both exports and imports again fell in comparison with the previous year as was the case five years ago. The composition of the Russian exports and imports of goods did not change radically during the previous years. The main items of export are, as always, mineral products, metals and fertilizers. Import is prevailed by foodstuffs, chemicals and heavy engineering equipment. The current situation is featured by the reduction of world oil prices, slump of the domestic economy and war of sanctions with the Western countries. All this substantially impairs the conditions of Russia’s foreign trade activities and inhibits its development in the upcoming years. In the author’s view, the implementation of measures worked out by the government – correction of tariff liabilities before the WTO, redirecting of trade streams from the European to the Asian markets, import substitution and export support – will unlikely improve the situation. Revision of the liabilities before the WTO in the conditions of the decrease of the internal demand and serious devaluation of Ruble is considered as inappropriate and counterproductive. “Asiatic turn” is only capable to compensate to a certain respect the loss of supplies of some food products from Europe, but cannot fully offset the loss of potentialities of the acquisition of modern technologies and equipment from the developed countries. It is doubtful that it will be possible to dramatically cut the import dependence. It is necessary to replace many kinds of foreign goods, but it is impossible to implement a frontal substitution of import in all directions. Excessive stress on the import substitution might lead to the emergence of shortages and poorer availability of some goods at the internal market and, at the worst, to self-isolation and economic autarky. The attempts to build up an effective system of export support might be successful only in the conditions of the establishment of the large-scale production of goods and services which would be comparable with the foreign analogues in respect to the criteria of price and quality. Taking this into consideration the technological renovation of production processes, first of all in the manufacturing industry, and on this basis rising up of the competitiveness of plants and factories are the most important prerequisites for encouraging export activities and formation of the new export specialization of the country.


2011 ◽  
Vol 179-180 ◽  
pp. 1177-1182 ◽  
Author(s):  
Xiao Qing Wu ◽  
Ming Shun Yang ◽  
Xin Qin Gao ◽  
Li Ba

With the fiercer competition and more complex environment of manufacturing industry, the service-oriented manufacturing mode integrating manufacture and service has become an inevitable trend. Together with the producer services and product-service system, the development process of service-oriented manufacturing mode was summarized. Compared with the traditional manufacturing mode, a conceptual model of service-oriented manufacturing was proposed. Furthermore, the operational framework of service-oriented manufacturing mode was established based on its operating characteristics. The research paper could provide the manufacturing enterprises with some foundation for implementing the service-oriented manufacturing mode.


2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Yohanes Nurcahyo Agung Wibowo ◽  
Toshihiro Kudo

Agglomeration, the spatial concentration of industries in a specific location, has been argued to improve productivity since it could provide positive externalities such as knowledge spillover, input sharing, and labor pooling. This paper examines the effect of large and medium manufacturing industry (LMI) agglomeration on labor productivity. Measuring the output and labor density as agglomeration effect by using 2009-2014 panel data from 44 cities and regions across the metropolitan areas of Indonesia, this study shows that in terms of output share, agglomeration positively contributes to labor productivity. On the other hand, in terms of labor density, agglomeration results in a negative impact on productivity. These findings suggest the government should expand industrial clusters in less densely populated areas, especially outside the island of Java, by providing necessary infrastructures such as electricity, ports, and roads, so that this development creates favorable economic conditions for investment and industrial development in such areas.


2018 ◽  
Vol 18 (2) ◽  
Author(s):  
Orlando Roque Da Silva ◽  
Delvio Venanzi ◽  
Haroldo Lhou Haegawa ◽  
Diogo Faustino

This paper explores how the choices and implementation of lean production practices are influenced by performance goals prioritized by firms in the context of operations strategy. We analyzed a set of fifty-six companies in the auto parts industry in Campinas and Jundiai region, divided into four strategic groups. These groups of firms that adopt similar strategic orientations were used to investigate the relationship between implementation of lean manufacturing practices and choice of performance objectives. The results suggest that consideration of strategic groups can improve the understanding of how performance objectives can define lean manufacturing practices adopted by manufacturing companies.


Sign in / Sign up

Export Citation Format

Share Document