Activated carbon from molasses efficiency for Cr(VI), Pb(II) and Cu(II) adsorption: A mechanistic study

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Sugar Industry ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Mechanistic Study ◽  
Acid Mixture ◽  
Maximum Adsorption Capacity ◽  
Good Potential

Activated carbon was prepared from molasses, which are natural precursors of vegetable origin resulting from the sugar industry. A simple elaboration process, based on chemical activation with phosphoric acid, was proposed. The final product, prepared by activation of molasses/phosphoric acid mixture in air at 500°C, presented high surface area (more than 1400 m2/g) and important maximum adsorption capacity for methylene blue (625 mg/g) and iodine (1660 mg/g). The activated carbon (MP2(500)) showed a good potential for the adsorption of Cr(VI), Cu(II) and Pb(II) from aqueous solutions. The affinity for the three ions was observed in the following order Cu2+ Cr6+ Pb2+. The process is governed by monolayer adsorption following the Langmuir model, with a correlation coefficient close to unity.

scholarly journals Statistical Optimization of Adsorption Processes for The Removal of Phenol by Activated Carbon Derived from Baobab Fruit Shell

2021 ◽  
Vol 1192 (1) ◽  
pp. 012003
Author(s):  
R Nedjai ◽  
N A Kabbashi ◽  
M Z Alam ◽  
M F R Al-Khatib
Keyword(s):  
Activated Carbon ◽  
Contact Time ◽  
Adsorption Property ◽  
Chemical Activation ◽  
High Surface ◽  
Aqueous Media ◽  
High Surface Area ◽  
Agitation Speed ◽  
Maximum Adsorption Capacity ◽  
Adsorption Parameters

Abstract Baobab fruit shell (BFS) biomass was used as an alternative precursor for producing high surface area and microporous baobab fruit shell activated carbon (BFS-AC) by chemical activation using KOH. Scanning electron microscope (SEM) was performed for the characterization of baobab fruit shell activated carbon. The adsorption property of BFS-AC for the removal of phenol from aqueous solution was evaluated. The effect of key adsorption parameters such as the contact time (10-20 min), BFS-AC dose (2.5-3.5 g/L), pH (1-3), and agitation speed (150-250 rpm) were optimized using a response surface methodology (RSM) with faced centered central composite design (FCCCD). Consequently, a maximum adsorption capacity (196.86 mg/g) was achieved at 15 min of contact time, 2 of pH, 3 g/L of adsorbent dosage, and 250 rpm of agitation speed. The results reveal that BFS-AC has an efficient performance for the removal of phenol from aqueous media.

Phosphoric Acid Effect on Prepared Activated Carbon from Saudi Arabia’s Date Frond Waste

2011 ◽  
Vol 110-116 ◽  
pp. 2124-2130 ◽  
Author(s):  
Abdul Rahim Yacob ◽  
Hassan M. Al Swaidan
Keyword(s):  
Activated Carbon ◽  
Phosphoric Acid ◽  
Ftir Spectroscopy ◽  
Surface Area ◽  
Date Palm ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Raw Material ◽  
Palm Tree

High surface area activated carbon has always fascinated researchers for its application as adsorbent, for water purification, medical and industrial. Date is the major export of Saudi Arabia, while tons of date foliar and fronds are troublesome and yet to be disposed. Transforming this waste into usable activated carbon can be a good idea for recycling, sustainable and green chemistry. In this study, date tree frond is selected to prepare activated carbon, while the effect of phosphoric acid in chemical activation is studied. Using thermogravimetry analysis, it was found that 400oC was the best temperature to convert date frond to carbon. This is supported by FTIR spectroscopy. Various concentration of phosphoric acid is used to optimize the product high surface area carbon obtained and it was found the best is at 60% phosphoric acid with the highest surface area of 1139 m2g-1. This result is also supported by FTIR spectroscopy, which indicates the similarities between commercial carbon and the carbon prepared. FESEM pictographs show chemical activation using phosphoric acid can easily open up pores and cavity of the prepared activated carbon the get the high surface area. It is thus suggested that for mass production of high surface area carbon, date palm frond is used as the source of raw material, due to its abundance and availability comes from the pruning process on the date palm tree, while chemically activated to get the high surface area.

scholarly journals Synthesis of activated carbon from biowaste of fir bark for methylene blue removal

2019 ◽  
Vol 6 (9) ◽  
pp. 190523 ◽  
Author(s):  
Lu Luo ◽  
Xi Wu ◽  
Zeliang Li ◽  
Yalan Zhou ◽  
Tingting Chen ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Nonlinear Models ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Raw Material ◽  
Maximum Adsorption Capacity ◽  
Koh Activation ◽  
Mb Adsorption

Activated carbon (AC) was successfully prepared from low-cost forestry fir bark (FB) waste using KOH activation method. Morphology and texture properties of ACFB were studied by scanning and high-resolution transmission electron microscopies (SEM and HRTEM), respectively. The resulting fir bark-based activated carbon (ACFB) demonstrated high surface area (1552 m 2 g −1 ) and pore volume (0.84 cm 3 g −1 ), both of which reflect excellent potential adsorption properties of ACFB towards methylene blue (MB). The effect of various factors, such as pH, initial concentration, adsorbent content as well as adsorption duration, was studied individually. Adsorption isotherms of MB were fitted using all three nonlinear models (Freundlich, Langmuir and Tempkin). The best fitting of MB adsorption results was obtained using Freundlich and Temkin. Experimental results showed that kinetics of MB adsorption by our ACFB adsorbent followed pseudo-second-order model. The maximum adsorption capacity obtained was 330 mg g −1 , which indicated that FB is an excellent raw material for low-cost production of AC suitable for cationic dye removal.

Retransformed graphitic activated carbon from ionic liquid-derived carbon containing nitrogen

2015 ◽  
Vol 3 (6) ◽  
pp. 2564-2567 ◽  
Author(s):  
Mok-Hwa Kim ◽  
Sol Yun ◽  
Ho Seok Park ◽  
Joong Tark Han ◽  
Kwang-Bum Kim ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Activated Carbon ◽  
Surface Area ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Graphitic Structure

Carbonization and chemical activation of an ionic liquid are demonstrated to produce an outstanding structural combination of an unexpectedly high surface area and a graphitic structure.

Application of response surface methodology to optimize the fabrication of ZnCl2-activated carbon from sugarcane bagasse for the removal of Cu2+

2017 ◽  
Vol 75 (9) ◽  
pp. 2047-2055 ◽  
Author(s):  
Thuan Van Tran ◽  
Quynh Thi Phuong Bui ◽  
Trinh Duy Nguyen ◽  
Van Thi Thanh Ho ◽  
Long Giang Bach
Keyword(s):  
Response Surface Methodology ◽  
Activated Carbon ◽  
Response Surface ◽  
Sugarcane Bagasse ◽  
Interactive Effect ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Aqueous Environment ◽  
Activation Temperature

The present study focused on the application of response surface methodology to optimize the fabrication of activated carbon (AC) from sugarcane bagasse for adsorption of Cu2+ ion. The AC was synthesized via chemical activation with ZnCl2 as the activating agent. The central composite design based experiments were performed to assess the individual and interactive effect of influential parameters, including activation temperature, ZnCl2 impregnation ratio and activation time on the AC yield and removal of Cu2+ ion from the aqueous environment. The statistically significant, well-fitting quadratic regression models were successfully developed as confirmed by high F- and low P-values (<0.0001), high correlation coefficients and lack-of-fit tests. Accordingly, the optimum AC yield and removal efficiency of Cu2+ were predicted, respectively, as 48.8% and 92.7% which were approximate to the actual values. By applying the predicted optimal parameters, the AC shows a surprisingly high surface area of around 1,500 m2/g accompanied by large pore volume and narrow micropore size at low fabrication temperature.

High surface area activated carbon prepared from cassava peel by chemical activation

2006 ◽  
Vol 97 (5) ◽  
pp. 734-739 ◽  
Author(s):  
Y. Sudaryanto ◽  
S.B. Hartono ◽  
W. Irawaty ◽  
H. Hindarso ◽  
S. Ismadji
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Cassava Peel

scholarly journals Karakteristik luas permukaan karbon aktif dari ampas tebu dengan aktivasi kimia

2018 ◽  
Vol 10 (3) ◽  
pp. 149
Author(s):  
Mahmud Sudibandriyo ◽  
L Lydia
Keyword(s):  
Activated Carbon ◽  
Surface Area ◽  
Sugarcane Bagasse ◽  
Chemical Activation ◽  
High Surface ◽  
High Surface Area ◽  
Physical Activation ◽  
Mass Ratio ◽  
Characterization Of Activated Carbon

Surface area characterization of activated carbon from sugarcane baggase by chemical activationAdsorption is one the process with many applications in the industries such as in a separation or in gas storage. In this adsorption, adsorbent selection is the most important thing. One of the adsorbent most suitable for this process is activated carbon. Previous studies show that high surface area of activated carbon can be produced from sugarcane bagasse using activator ZnCl2. The research’s goal is to produce activated carbon from sugarcane bagasse and determine the effects of activator on the surface area of activated carbon produced. Activators used in this research are KOH and ZnCl2 with the mass ratio of activator/carbon are 1/1, 2/1 and 3/1. The results show that The highest surface area, 938,2 m2/g, is obtained by activation using KOH with mass ratio of activator/carbon 3/1, whereas the highest surface area by activation using ZnCl2 is 632 m2/g with mass ratio of activator/carbon 2/1. For comparison, preparation of activated carbon by physical activation is also done and the surface area is 293 m2/g.Keywords: Activated carbon, chemical activation, sugarcane bagasse, KOH, ZnCl2 Abstrak Adsorpsi merupakan salah satu proses yang banyak digunakan dalam industri baik dalam pemisahan maupun untuk penyimpanan gas. Pada proses adsorpsi ini, pemilihan adsorben merupakan hal yang sangat penting. Salah satu jenis adsorben yang sangat cocok untuk proses ini adalah karbon aktif. Penelusuran studi sebelumnya menunjukkan bahwa karbon aktif dengan luas permukaan yang cukup tinggi dapat dibuat dari ampas tebu dengan menggunakan aktivator ZnCl2. Penelitian ini bertujuan untuk menghasilkan karbon aktif dari ampas tebu dengan aktivasi kimia serta mengetahui pengaruh aktivator terhadap luas permukaan karbon aktif yang dihasilkan. Aktivator yang digunakan dalam penelitian ini adalah KOH dan ZnCl2 dengan rasio massa aktivator/massa karbon 1/1, 2/1, dan 3/1. Aktivasi dilakukan pada temperatur 700 oC selama 1 jam. Hasil penelitian menunjukkan bahwa luas permukaan tertinggi sebesar 938,2 m2/g diperoleh dengan aktivasi menggunakan KOH dengan rasio massa aktivator/massa arang 3/1, sedangkan aktivasi dengan menggunakan ZnCl2 diperoleh luas permukaan tertinggi sebesar 632 m2/g dengan rasio massa aktivator/massa arang 2/1. Sebagai pembanding, pada penelitian ini juga dilakukan pembuatan karbon aktif dengan metode aktivasi fisika dan diperoleh luas permukaan karbon aktif sebesar 293 m2/g.Kata kunci: Aktivasi kimia, ampas tebu, karbon aktif, KOH, ZnCl2

Sign in / Sign up

Export Citation Format

Share Document