scholarly journals Uncertainties in Antarctic sea-ice thickness retrieval from ICESat

2015 ◽  
Vol 56 (69) ◽  
pp. 107-119 ◽  
Author(s):  
Stefan Kern ◽  
Gunnar Spreen
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Sensitivity Study ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Sea Ice Thickness ◽  
Earth Observing System ◽  
Antarctic Sea Ice ◽  
Snow Properties ◽  
The Mean

AbstractA sensitivity study was carried out for the lowest-level elevation method to retrieve total (sea ice + snow) freeboard from Ice, Cloud and land Elevation Satellite (ICESat) elevation measurements in the Weddell Sea, Antarctica. Varying the percentage (P) of elevations used to approximate the instantaneous sea-surface height can cause widespread changes of a few to ˃10cm in the total freeboard obtained. Other input parameters have a smaller influence on the overall mean total freeboard but can cause large regional differences. These results, together with published ICESat elevation precision and accuracy, suggest that three times the mean per gridcell single-laser-shot error budget can be used as an estimate for freeboard uncertainty. Theoretical relative ice thickness uncertainty ranges between 20% and 80% for typical freeboard and snow properties. Ice thickness is computed from total freeboard using Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) snow depth data. Average ice thickness for the Weddell Sea is 1.73 ± 0.38 m for ICESat measurements from 2004 to 2006, in agreement with previous work. The mean uncertainty is 0.72 ± 0.09 m. Our comparison with data of an alternative approach, which assumes that sea-ice freeboard is zero and that total freeboard equals snow depth, reveals an average sea-ice thickness difference of ∼0.77m.

scholarly journals ICESat observations of seasonal and interannual variations of sea-ice freeboard and estimated thickness in the Weddell Sea, Antarctica (2003–2009)

2011 ◽  
Vol 52 (57) ◽  
pp. 43-51 ◽  
Author(s):  
Donghui Yi ◽  
H. Jay Zwally ◽  
John W. Robbins
Keyword(s):  
Sea Ice ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Sea Ice Extent ◽  
Sea Ice Thickness ◽  
Earth Observing System ◽  
Pack Ice ◽  
Snow Water ◽  
The Mean ◽  
Seasonal And Interannual Variations

AbstractSea-ice freeboard heights for 17 ICESat campaign periods from 2003 to 2009 are derived from ICESat data. Freeboard is combined with snow depth from Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) data and nominal densities of snow, water and sea ice, to estimate sea-ice thickness. Sea-ice freeboard and thickness distributions show clear seasonal variations that reflect the yearly cycle of growth and decay of the Weddell Sea (Antarctica) pack ice. During October–November, sea ice grows to its seasonal maximum both in area and thickness; the mean freeboards are 0.33–0.41m and the mean thicknesses are 2.10–2.59 m. During February–March, thinner sea ice melts away and the sea-ice pack is mainly distributed in the west Weddell Sea; the mean freeboards are 0.35–0.46m and the mean thicknesses are 1.48–1.94 m. During May–June, the mean freeboards and thicknesses are 0.26–0.29m and 1.32–1.37 m, respectively. the 6 year trends in sea-ice extent and volume are (0.023±0.051)×106 km2 a–1 (0.45% a–1) and (0.007±0.092)×103 km3 a–1 (0.08% a–1); however, the large standard deviations indicate that these positive trends are not statistically significant.

scholarly journals A Textural Approach to Improving Snow Depth Estimates in the Weddell Sea

2020 ◽  
Vol 12 (9) ◽  
pp. 1494
Author(s):  
M. Jeffrey Mei ◽  
Ted Maksym
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Thickness Distribution ◽  
Radar Data ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Two Dimensional ◽  
Snow Surface ◽  
Sea Ice Thickness ◽  
Antarctic Sea Ice

The snow depth on Antarctic sea ice is critical to estimating the sea ice thickness distribution from laser altimetry data, such as from Operation IceBridge or ICESat-2. Snow redistributed by wind collects around areas of deformed ice and forms a wide variety of features on sea ice; the morphology of these features may provide some indication of the mean snow depth. Here, we apply a textural segmentation algorithm to classify and group similar textures to infer the distribution of snow using snow surface freeboard measurements from Operation IceBridge campaigns over the Weddell Sea. We find that texturally-similar regions have similar snow/ice ratios, even when they have different absolute snow depth measurements. This allows for the extrapolation of nadir-looking snow radar data using two-dimensional surface altimetry scans, providing a two-dimensional estimate of the snow depth with ∼22% error. We show that at the floe scale (∼180 m), snow depth can be directly estimated from the snow surface with ∼20% error using deep learning techniques, and that the learned filters are comparable to standard textural analysis techniques. This error drops to ∼14% when averaged over 1.5 km scales. These results suggest that surface morphological information can improve remotely-sensed estimates of snow depth, and hence sea ice thickness, as compared to current methods. Such methods may be useful for reducing uncertainty in Antarctic sea ice thickness estimates from ICESat-2.

scholarly journals A comparison between Envisat and ICESat sea ice thickness in the Antarctic

2021 ◽  
Author(s):  
Jinfei Wang ◽  
Chao Min ◽  
Robert Ricker ◽  
Qian Shi ◽  
Bo Han ◽  
...  
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Spatial Variations ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Sea Ice Thickness ◽  
Temporal And Spatial Variations ◽  
Antarctic Sea Ice ◽  
Temporal And Spatial ◽  
The Antarctic

Abstract. The crucial role that Antarctic sea ice plays in the global climate system is strongly linked to its thickness. While field observations are too sparse in the Antarctic to determine long-term trends of the Antarctic sea ice thickness (SIT) on a hemispheric scale, satellite radar altimetry data can be applied with a promising prospect. European Space Agency Climate Change Initiative – Sea Ice Project (ESA SICCI) includes sea ice freeboard and sea ice thickness derived from Envisat, covering the entire Antarctic year-round from 2002 to 2012. In this study, the SICCI Envisat SIT in the Antarctic is first compared with a conceptually new ICESat SIT product retrieved from an algorithm employing modified ice density. Both data sets are compared to SIT estimates from upward-looking sonar (ULS) in the Weddell Sea, showing mean differences (MD) and standard deviations (SD) of 1.29 (0.65) m for Envisat-ULS, while we find 1.11 (0.81) m for ICESat-ULS, respectively. The inter-comparisons are conducted for three seasons except winter, based on the ICESat operating periods. According to the results, the differences between Envisat and ICESat SIT reveal significant temporal and spatial variations. More specifically, the smallest seasonal SIT MD (with SD shown in brackets) of 0.00 m (0.39 m) for Envisat-ICESat for the entire Antarctic is found in spring (October–November) while larger MD of 0.52 m (0.68 m) and 0.57 m (0.45 m) exist in summer (February–March) and autumn (May–June), respectively. It is also shown that from autumn to spring, mean Envisat SIT decreases while mean ICESat SIT increases. Our findings suggest that overestimation of Envisat sea ice freeboard, potentially caused by radar backscatter originating from inside the snow layer, primarily accounts for the differences between Envisat and ICESat SIT in summer and autumn, while the uncertainties of snow depth product are not the dominant cause of the differences.To get a better understanding of the characteristics of the Envisat-derived sea ice thickness product, we firstly conduct a comprehensive comparison between Envisat and ICESat-1 sea ice thickness. Their differences reveal significant temporal and spatial variations. Our findings suggest that overestimation of Envisat sea ice freeboard primarily accounts for the differences in summer and autumn, while the uncertainties of snow depth product are not the dominant cause of the differences. 

scholarly journals The impact of snow depth, snow density and ice density on sea ice thickness retrieval from satellite radar altimetry: results from the ESA-CCI Sea Ice ECV Project Round Robin Exercise

2015 ◽  
Vol 9 (1) ◽  
pp. 37-52 ◽  
Author(s):  
S. Kern ◽  
K. Khvorostovsky ◽  
H. Skourup ◽  
E. Rinne ◽  
Z. S. Parsakhoo ◽  
...  
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Ice Thickness ◽  
Data Sets ◽  
Snow Density ◽  
Radar Altimetry ◽  
Sea Ice Thickness ◽  
The Mean ◽  
Satellite Radar ◽  
Satellite Radar Altimetry

Abstract. We assess different methods and input parameters, namely snow depth, snow density and ice density, used in freeboard-to-thickness conversion of Arctic sea ice. This conversion is an important part of sea ice thickness retrieval from spaceborne altimetry. A data base is created comprising sea ice freeboard derived from satellite radar altimetry between 1993 and 2012 and co-locate observations of total (sea ice + snow) and sea ice freeboard from the Operation Ice Bridge (OIB) and CryoSat Validation Experiment (CryoVEx) airborne campaigns, of sea ice draft from moored and submarine upward looking sonar (ULS), and of snow depth from OIB campaigns, Advanced Microwave Scanning Radiometer (AMSR-E) and the Warren climatology (Warren et al., 1999). We compare the different data sets in spatiotemporal scales where satellite radar altimetry yields meaningful results. An inter-comparison of the snow depth data sets emphasizes the limited usefulness of Warren climatology snow depth for freeboard-to-thickness conversion under current Arctic Ocean conditions reported in other studies. We test different freeboard-to-thickness and freeboard-to-draft conversion approaches. The mean observed ULS sea ice draft agrees with the mean sea ice draft derived from radar altimetry within the uncertainty bounds of the data sets involved. However, none of the approaches are able to reproduce the seasonal cycle in sea ice draft observed by moored ULS. A sensitivity analysis of the freeboard-to-thickness conversion suggests that sea ice density is as important as snow depth.

scholarly journals Snow depth uncertainty and its implications on satellite derived Antarctic sea ice thickness

2018 ◽  
Author(s):  
Daniel Price ◽  
Iman Soltanzadeh ◽  
Wolfgang Rack
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Snow Accumulation ◽  
In Situ Measurements ◽  
Ice Thickness ◽  
Growth Season ◽  
Sea Ice Thickness ◽  
Antarctic Sea Ice ◽  
Fast Ice

Abstract. Knowledge of the snow depth distribution on Antarctic sea ice is poor but is critical to obtaining sea ice thickness from satellite altimetry measurements of freeboard. We examine the usefulness of various snow products to provide snow depth information over Antarctic fast ice with a focus on a novel approach using a high-resolution numerical snow accumulation model (SnowModel). We compare this model to results from ECMWF ERA-Interim precipitation, EOS Aqua AMSR-E passive microwave snow depths and in situ measurements at the end of the sea ice growth season. The fast ice was segmented into three areas by fastening date and the onset of snow accumulation was calibrated to these dates. SnowModel falls within 0.02 m snow water equivalent (swe) of in situ measurements across the entire study area, but exhibits deviations of 0.05 m swe from these measurements in the east where large topographic features appear to have caused a positive bias in snow depth. AMSR-E provides swe values half that of SnowModel for the majority of the sea ice growth season. The coarser resolution ERA-Interim, not segmented for sea ice freeze up area reveals a mean swe value 0.01 m higher than in situ measurements. These various snow datasets and in situ information are used to infer sea ice thickness in combination with CryoSat-2 (CS-2) freeboard data. CS-2 is capable of capturing the seasonal trend of sea ice freeboard growth but thickness results are highly dependent on the assumptions involved in separating snow and ice freeboard. With various assumptions about the radar penetration into the snow cover, the sea ice thickness estimates vary by up to 2 m. However, we find the best agreement between CS-2 derived and in situ thickness when a radar penetration of 0.05-0.10 m into the snow cover is assumed.

scholarly journals A comparison between Envisat and ICESat sea ice thickness in the Antarctic

2020 ◽  
Author(s):  
Jinfei Wang ◽  
Chao Min ◽  
Robert Ricker ◽  
Qinghua Yang ◽  
Qian Shi ◽  
...  
Keyword(s):  
Sea Ice ◽  
European Space Agency ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Radar Altimeter ◽  
Average Deviation ◽  
Absolute Deviation ◽  
Sea Ice Thickness ◽  
Antarctic Sea Ice ◽  
The Antarctic

Abstract. The crucial role that Antarctic sea ice plays in the global climate system is strongly linked to its thickness. While in situ observations are too sparse in the Antarctic to determine long-term trends of the Antarctic sea ice thickness on a global scale, satellite radar altimetry data can be applied with a promising prospect. A newly released Envisat-derived product from the European Space Agency Sea Ice Climate Change Initiative (ESA SICCI), including sea ice freeboard and sea ice thickness, covers the entire Antarctic year-round from 2002 to 2012. In this study, the SICCI Envisat sea ice thickness in the Antarctic is firstly compared with a conceptually new proposed ICESat ice thickness that has been derived from an algorithm employing modified ice density. Both data sets have been validated with the Weddell Sea upward looking sonar measurements (ULS), indicating that ICESat agrees better with field observations. The inter-comparisons are conducted for three seasons except winter based on the ICESat operating periods. According to the results, the deviations between Envisat and ICESat sea ice thickness are different considering different seasons, years and regions. More specifically, the smallest average deviation between Envisat and ICESat sea ice thickness exists in spring by −0.03 m while larger deviations exist in summer and autumn by 0.86 m and 0.62 m, respectively. Although the smallest absolute deviation occurs in spring 2005 by 0.02 m, the largest correlation coefficient appears in autumn 2004 by 0.77. The largest positive deviation occurs in the western Weddell Sea by 1.03 m in summer while the largest negative deviation occurs in the Eastern Antarctic by −0.25 m in spring. Potential reasons for those deviations mainly deduce from the limitations of Envisat radar altimeter affected by the weather conditions and the surface roughness as well as the different retrieval algorithms. The better performance in spring of Envisat has a potential relation with relative humidity.

scholarly journals Snow-driven uncertainty in CryoSat-2-derived Antarctic sea ice thickness – insights from McMurdo Sound

2019 ◽  
Vol 13 (4) ◽  
pp. 1409-1422
Author(s):  
Daniel Price ◽  
Iman Soltanzadeh ◽  
Wolfgang Rack ◽  
Ethan Dale
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Snow Accumulation ◽  
In Situ Measurements ◽  
Ice Thickness ◽  
Growth Season ◽  
Mcmurdo Sound ◽  
Sea Ice Thickness ◽  
Antarctic Sea Ice

Abstract. Knowledge of the snow depth distribution on Antarctic sea ice is poor but is critical to obtaining sea ice thickness from satellite altimetry measurements of the freeboard. We examine the usefulness of various snow products to provide snow depth information over Antarctic fast ice in McMurdo Sound with a focus on a novel approach using a high-resolution numerical snow accumulation model (SnowModel). We compare this model to results from ECMWF ERA-Interim precipitation, EOS Aqua AMSR-E passive microwave snow depths and in situ measurements at the end of the sea ice growth season in 2011. The fast ice was segmented into three areas by fastening date and the onset of snow accumulation was calibrated to these dates. SnowModel captures the spatial snow distribution gradient in McMurdo Sound and falls within 2 cm snow water equivalent (s.w.e) of in situ measurements across the entire study area. However, it exhibits deviations of 5 cm s.w.e. from these measurements in the east where the effect of local topographic features has caused an overestimate of snow depth in the model. AMSR-E provides s.w.e. values half that of SnowModel for the majority of the sea ice growth season. The coarser-resolution ERA-Interim produces a very high mean s.w.e. value 20 cm higher than the in situ measurements. These various snow datasets and in situ information are used to infer sea ice thickness in combination with CryoSat-2 (CS-2) freeboard data. CS-2 is capable of capturing the seasonal trend of sea ice freeboard growth but thickness results are highly dependent on what interface the retracked CS-2 height is assumed to represent. Because of this ambiguity we vary the proportion of ice and snow that represents the freeboard – a mathematical alteration of the radar penetration into the snow cover – and assess this uncertainty in McMurdo Sound. The ranges in sea ice thickness uncertainty within these bounds, as means of the entire growth season, are 1.08, 4.94 and 1.03 m for SnowModel, ERA-Interim and AMSR-E respectively. Using an interpolated in situ snow dataset we find the best agreement between CS-2-derived and in situ thickness when this interface is assumed to be 0.07 m below the snow surface.

scholarly journals Estimating Early-Winter Antarctic Sea Ice Thickness From Deformed Ice Morphology

2019 ◽  
Author(s):  
M. Jeffrey Mei ◽  
Ted Maksym ◽  
Hanumant Singh
Keyword(s):  
Neural Network ◽  
Sea Ice ◽  
Relative Error ◽  
Snow Depth ◽  
Large Scale ◽  
Small Scale ◽  
Ice Thickness ◽  
Sea Ice Thickness ◽  
Mean Relative Error ◽  
Antarctic Sea Ice

Abstract. Satellites have documented variability in sea ice areal extent for decades, but there are significant challenges in obtaining analogous measurements for sea ice thickness data in the Antarctic, primarily due to difficulties in estimating snow cover on sea ice. Sea ice thickness can be estimated from surface elevation measurements, such as those from airborne/satellite LiDAR, by assuming some snow depth distribution or empirically fitting with limited data from drilled transects from various field studies. Current estimates for large-scale Antarctic sea ice thickness have errors as high as ~ 50 %, and simple statistical models of small-scale mean thickness have similarly high errors. Averaging measurements over hundreds of meters can improve the model fits to existing data, though these results do not necessarily generalize to other floes. At present, we do not have algorithms that accurately estimate sea ice thickness at high resolutions. We use a convolutional neural network with laser altimetry profiles of sea ice surfaces at 0.2 m resolution to show that it is possible to estimate sea ice thickness at 20 m resolution with better accuracy and generalization than current methods (mean relative errors ~ 15 %). Moreover, the neural network does not require specifying snow depth/density, which increases its potential applications to other LiDAR datasets. The learned features appear to correspond to basic morphological features, and these features appear to be common to other floes with the same climatology. This suggests that there is a relationship between the surface morphology and the ice thickness. The model has a mean relative error of 20 % when applied to a new floe from the region and season, which is much lower than the mean relative error for a linear fit (errors up to 47 %). This method may be extended to lower-resolution, larger-footprint data such as such as IceBridge, and suggests a possible avenue to reduce errors in satellite estimates of Antarctic sea ice thickness from ICESat-2 over current methods, especially at smaller scale.

scholarly journals Surface-based Ku- and Ka-band polarimetric radar for sea ice studies

2020 ◽  
Vol 14 (12) ◽  
pp. 4405-4426
Author(s):  
Julienne Stroeve ◽  
Vishnu Nandan ◽  
Rosemary Willatt ◽  
Rasmus Tonboe ◽  
Stefan Hendricks ◽  
...  
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Ice Thickness ◽  
Polarimetric Radar ◽  
Radar Altimeter ◽  
Radar Backscatter ◽  
Sea Ice Thickness ◽  
Ka Band ◽  
Snow Properties ◽  
Wide Range

Abstract. To improve our understanding of how snow properties influence sea ice thickness retrievals from presently operational and upcoming satellite radar altimeter missions, as well as to investigate the potential for combining dual frequencies to simultaneously map snow depth and sea ice thickness, a new, surface-based, fully polarimetric Ku- and Ka-band radar (KuKa radar) was built and deployed during the 2019–2020 year-long MOSAiC international Arctic drift expedition. This instrument, built to operate both as an altimeter (stare mode) and as a scatterometer (scan mode), provided the first in situ Ku- and Ka-band dual-frequency radar observations from autumn freeze-up through midwinter and covering newly formed ice in leads and first-year and second-year ice floes. Data gathered in the altimeter mode will be used to investigate the potential for estimating snow depth as the difference between dominant radar scattering horizons in the Ka- and Ku-band data. In the scatterometer mode, the Ku- and Ka-band radars operated under a wide range of azimuth and incidence angles, continuously assessing changes in the polarimetric radar backscatter and derived polarimetric parameters, as snow properties varied under varying atmospheric conditions. These observations allow for characterizing radar backscatter responses to changes in atmospheric and surface geophysical conditions. In this paper, we describe the KuKa radar, illustrate examples of its data and demonstrate their potential for these investigations.

scholarly journals Three years of sea ice freeboard, snow depth, and ice thickness of the Weddell Sea from Operation IceBridge and CryoSat-2

2018 ◽  
Vol 12 (8) ◽  
pp. 2789-2801 ◽  
Author(s):  
Ron Kwok ◽  
Sahra Kacimi
Keyword(s):  
Sea Ice ◽  
Snow Depth ◽  
Basal Layer ◽  
Weddell Sea ◽  
Ice Thickness ◽  
Sea Ice Thickness ◽  
Mean Differences ◽  
The Impact ◽  
Snow Thickness

Abstract. We examine the variability of sea ice freeboard, snow depth, and ice thickness in three years (2011, 2014, and 2016) of repeat surveys of an IceBridge (OIB) transect across the Weddell Sea. Averaged over this transect, ice thickness ranges from 2.40±1.07 (2011) to 2.60±1.15 m (2014) and snow depth from 35.8±11.5 (2016) to 43.6±10.2 cm (2014), suggesting a highly variable but broadly thicker ice cover compared to that inferred from drilling and ship-based measurements. Spatially, snow depth and ice thickness are higher in the more deformed ice of the western Weddell. The impact of undersampling the thin end of the snow depth distribution on the regional statistics, due to the resolution of the snow radar, is assessed. Radar freeboards (uncompensated for snow thickness) from CryoSat-2 (CS-2) sampled along the same transect are consistently higher (by up to 8 cm) than those computed using OIB data. This suggests radar scattering that originates above the snow–ice interface, possibly due to salinity in the basal layer of the snow column. Consequently, sea ice thicknesses computed using snow depth estimates solely from differencing OIB and CS-2 freeboards (without snow radar) are therefore generally higher; mean differences in sea ice thickness along a transect are up to ∼0.6 m higher (in 2014). This analysis is relevant to the use of differences between ICESat-2 and CS-2 freeboards to estimate snow depth for ice thickness calculations. Our analysis also suggests that, even with these expected biases, this is an improvement over the assumption that snow depth is equal to the total freeboard, with which the underestimation of thickness could be up to a meter. Importantly, better characterization of the source of these biases is critical for obtaining improved estimates and understanding the limits of retrievals of Weddell Sea ice thickness from satellite altimeters.

Sign in / Sign up

Export Citation Format

Share Document