Major Factors Affecting Waste Generation on Construction Sites in Iran

Author(s):  
Bahareh Nikmehr ◽  
◽  
M Reza Hosseini ◽  
Mehran Oraee ◽  
Nicholas Chileshe ◽  
...  
2018 ◽  
Vol 162 ◽  
pp. 02032 ◽  
Author(s):  
Tareq Khaleel ◽  
Yasser Nassar

Productivity is a very important element in the estimation process in construction management. The objective of this research is to identify and analyze the factors which affect labor productivity in construction projects. In this research, 42 effective factors were collected from site survey, interview with engineers and experts, and previous research in the Arab world. These factors are grouped into Nine categories “Workforce, Leadership, Motivation, Supervisors, Safety, Project, Time, Material, and External”. A survey questionnaire of 70 respondents was distributed among different experts. A statistical analysis was done using SPSS and EXCEL packages. The Relative Importance Index was used to find out the most significant factors affecting the labor productivity in construction sites. The results accomplished from the survey revealed that the major factors negatively affect the labor productivity (ranked from the worst factor with Relative Importance Index values, respectively) namely, Availability Material (88.571%), Climate status “Weather” (88%), Religious occasions (86.29%), Number of working groups (86%), Ganger experience (85.714%), Workforce surveillance (84.857%), Ganger Age (84%), working at height (82%), Drawings and specifications alteration during execution (81.69%), and Sequence of floor (80.571%). Based upon these findings, this can help the construction professionals to improve the productivity and project performance in Iraq.


2021 ◽  
Vol 13 (11) ◽  
pp. 6358
Author(s):  
Ali Chalak ◽  
Hussein F. Hassan ◽  
Pamela Aoun ◽  
Mohamad G. Abiad

Food waste from the food service and hospitality industry is increasing, especially in Mezze serving restaurants, where a variety of dishes are usually served. To date, information on the factors affecting food waste generation in restaurants is scarce. This study aimed to identify the drivers and determinants of food waste generation while dining out at restaurants serving Mezze-type cuisine. According to the results from a convenience sample of 496 restaurant clientele, gender, age, and marital status did not affect food waste generation. Diners in both low and high price range restaurants waste above the grand mean compared to middle-range ones. Waste generation decreased significantly as the number of diners per table increased. However, ordering water-pipe, alcohol, or more dishes contributed significantly to food waste generation. As food waste is not the outcome of a single behavior, our study puts food waste generation drivers and determinants while dining out in perspective.


2021 ◽  
Vol 13 (2) ◽  
pp. 810
Author(s):  
Eun Yeong Seong ◽  
Nam Hwi Lee ◽  
Chang Gyu Choi

This study confirmed the general belief of urban planners that mixed land use promotes walking in Seoul, a metropolis in East Asia, by analyzing the effect of mixed land use on the travel mode choice of housewives and unemployed people who make non-commuting trips on weekdays. Using binomial logistic regression of commuting data, it was found that the more mixed a neighborhood environment’s uses are, the more the pedestrians prefer to walk rather than drive. The nonlinear relationship between the land use mix index and the choice to walk was also confirmed. Although mixed land use in neighborhoods increased the probability of residents choosing walking over using cars, when the degree of complexity increased above a certain level, the opposite effect was observed. As the density of commercial areas increased, the probability of selecting walking increased. In addition to locational characteristics, income and housing type were also major factors affecting the choice to walk; i.e., when the residents’ neighborhood environment was controlled for higher income and living in an apartment rather than multi-family or single-family housing, they were more likely to choose driving over walking.


2021 ◽  
Vol 18 (1) ◽  
Author(s):  
Murat Gözüküçük ◽  
Esra Gülen Yıldız

Abstract Background This study aimed to determine the possible prognostic factors correlated with the treatment modalities of tubo-ovarian abscesses (TOAs) and thus to assess whether the need for surgery was predictable at the time of initial admission. Materials and methods Between January 2012 and December 2019, patients who were hospitalized with a TOA in our clinic were retrospectively recruited. The age of the patients, clinical and sonographic presentation, pelvic inflammatory risk factors, antibiotic therapy, applied surgical treatment, laboratory infection parameters, and length of hospital stay were recorded. Results The records of 115 patients hospitalized with a prediagnosis of TOA were reviewed for the current study. After hospitalization, TOA was ruled out in 19 patients, and data regarding 96 patients was included for analysis. Twenty-eight (29.2%) patients underwent surgical treatment due to failed antibiotic therapy. Sixty-eight (70.8%) were successfully treated with parenteral antibiotics. Medical treatment failure and need for surgery were more common in patients with a large abscess (volume, > 40 cm3, or diameter, > 5 cm). The group treated by surgical intervention was statistically older than the patients receiving medical treatment (p < 0.05). Conclusions Although the treatment in TOA may vary according to clinical, sonographic, and laboratory findings; age of patients, the abscess size, and volume were seen as the major factors affecting medical treatment failure. Moreover, TOA treatment should be planned on a more individual basis.


1999 ◽  
Vol 17 (5) ◽  
pp. 309-315 ◽  
Author(s):  
Edwin Sawacha ◽  
Shamil Naoum ◽  
Daniel Fong

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Qinghua Li ◽  
Jintao Liu ◽  
Shilang Xu

As one-dimensional (1D) nanofiber, carbon nanotubes (CNTs) have been widely used to improve the performance of nanocomposites due to their high strength, small dimensions, and remarkable physical properties. Progress in the field of CNTs presents a potential opportunity to enhance cementitious composites at the nanoscale. In this review, current research activities and key advances on multiwalled carbon nanotubes (MWCNTs) reinforced cementitious composites are summarized, including the effect of MWCNTs on modulus of elasticity, porosity, fracture, and mechanical and microstructure properties of cement-based composites. The issues about the improvement mechanisms, MWCNTs dispersion methods, and the major factors affecting the mechanical properties of composites are discussed. In addition, large-scale production methods of MWCNTs and the effects of CNTs on environment and health are also summarized.


2009 ◽  
Vol 289-292 ◽  
pp. 413-420 ◽  
Author(s):  
F.J. Bolívar ◽  
L. Sánchez ◽  
M.P. Hierro ◽  
F.J. Pérez

The development of new power generation plants firing fossil fuel is aiming at achieving higher thermal efficiencies of the energy conversion process. The major factors affecting the efficiency of the conventional steam power plants are the temperature and, to a lesser extent, the pressure of the steam entering the turbine. The increased operating temperature and pressure require new materials that have major oxidation resistance. Due to this problem, in the last years numerous studies have been conducted in order to develop new coatings to enhance the resistance of steels with chromium contents between 9 and 12% wt against steam oxidation in order to allow operation of steam turbines at 650 0C. In this study, Si protective coatings were deposited by CVD-FBR on ferritic steel P-91. These type of coatings have shown to be protective at 650 0C under steam for at least 3000 hours of laboratory steam exposure under atmospheric pressure. Morphology and composition of coatings were characterized by different techniques, such as scanning electron microscopy (SEM), electron probe microanalysis, and X-ray diffraction (XRD). The results show a substantial increase of steam oxidation protection afforded by Si coating by CVD-FBR process.


1986 ◽  
Vol 107 (1) ◽  
pp. 43-54 ◽  
Author(s):  
Lindsey Caird ◽  
W. Holmes

SUMMARYInformation on the total organic matter intake, concentrates supplied (C), live weight (LW), week of lactation (WL), milk yield (MY), herbage organic matter digestibility (HOMD), herbage mass, sward height (SHT) or herbage allowance (HAL) measured individually for 357 cows at one of three sites was assembled. Observed intake was compared with intakes predicted by existing intake equations and new prediction equations based on regression models or regression and least-squares constants were developed. Major factors affecting intake were MY, LW, WL, C and HAL or SHT. Although HOMD was correlated with intake, better predictions were obtained when HOMD was omitted. There were differences between sites possibly associated with differences in measurement techniques.The predictive value of some existing equations and new equations were tested against independent sets of data. A simple equation (A) based on MY and LW (Ministry of Agriculture, Fisheries and Food, 1975) gave satisfactory average predictions but the mean square prediction error (MSPE) was high. The equations of Vadiveloo & Holmes (1979) adjusted for bias gave a relatively low MSPE. The preferred new equations for grazing cattle included MY, LW, WL, C and HAL or SHT, and their MSPE were similar to or lower than for indoor equations.The discussion indicates that a simple equation (A) would give adequate predictions for farm planning. The more detailed equations illustrate the inter-relations of animal with sward conditions and concentrate allowances. Predicted intakes may deviate from actual intakes because of short-term changes in body reserves.


Sign in / Sign up

Export Citation Format

Share Document