scholarly journals Electrochemical Synthesis of Allylic Amines from Alkenes and Amines

2021 ◽  
Author(s):  
Diana Wang ◽  
Karina Targos ◽  
Zachary Wickens
Keyword(s):  
Aliphatic Amine ◽  
Reactive Intermediates ◽  
Building Blocks ◽  
Electrochemical Process ◽  
Biologically Active ◽  
Secondary Amines ◽  
High Yield ◽  
Mechanistic Studies ◽  
Allylic Amines ◽  
Synthetic Strategy

Allylic amines are valuable synthetic targets en route to diverse biologically active amine products. Current allylic C–H amination strate-gies remain limited with respect to the viable N-substituents. Herein we disclose a new electrochemical process to prepare aliphatic allylic amines by coupling two abundant starting materials: secondary amines and unactivated alkenes. This oxidative transformation proceeds via electrochemical generation of an electrophilic adduct between thianthrene and the alkene substrates. Treatment of these adducts with aliphatic amine nucleophiles and base provides allylic amine products in high yield. This synthetic strategy is also amenable to functionali-zation of feedstock gaseous alkenes at 1 atmosphere. In the case of 1-butene, remarkable Z-selective crotylation is observed. This strategy, however, is not limited to the synthesis of simple building blocks; complex biologically active molecules are suitable as both alkene and amine coupling partners. Preliminary mechanistic studies implicate vinylthianthrenium salts as key reactive intermediates.

scholarly journals Palladium-catalyzed α-arylation for the addition of small rings to aromatic compounds

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Zhi-Tao He ◽  
John F. Hartwig
Keyword(s):  
Electronic Properties ◽  
Aromatic Compounds ◽  
Ring Opening ◽  
Biologically Active ◽  
High Yield ◽  
Protecting Group ◽  
Mechanistic Studies ◽  
Claisen Condensation ◽  
Wide Range ◽  
Palladium Catalyzed

Abstract Small, strained rings have rigid, defined conformations and unique electronic properties. For these reasons, many groups seek to use these subunits to form biologically active molecules. We report a generally applicable approach to attach small rings to a wide range of aromatic compounds by palladium-catalyzed α-arylation of cyclopropyl, cyclobutyl and azetidinyl esters. The direct α-arylation of cyclopropyl esters and cyclobutyl esters is achieved in high yield by ensuring that the rate of coupling exceeds the rate of Claisen condensation. The α-arylation of azetidines is achieved without ring opening of the strained saturated heterocycle by conducting the reactions with an azetidine derivative bearing a benzyl protecting group on nitrogen. Mechanistic studies show that the α-arylation of small rings is challenging because of the weak acidity of α C-H bond (cyclopropanes), strong sensitivity of the strained esters to Claisen condensation (cyclobutatanes), or facile decomposition of the enolates (azetidinyl esters).

scholarly journals The preparative synthetic approach to 4-(trifluoromethoxy)piperidine and 4-(trifluoromethoxymethyl)piperidine

2021 ◽  
Vol 19 (1(73)) ◽  
pp. 3-9
Author(s):  
Ivan G. Logvinenko ◽  
Violetta G. Dolovanyuk ◽  
Ivan S. Kondratov
Keyword(s):  
Mass Spectrometry ◽  
Benzoyl Chloride ◽  
Building Blocks ◽  
Secondary Amines ◽  
Synthetic Approach ◽  
Synthetic Strategy ◽  
Benzoyl Group ◽  
Two Stages ◽  
13C And 19F Nmr ◽  
Convenient Synthetic Approach

Aim. To develop a convenient synthetic approach for the preparation of multigram amounts of 4-(trifluoromethoxy)-piperidine and 4-(trifluoromethoxymethyl)piperidine – promising building blocks for medicinal chemistry.Results and discussion. 4-(Trifluoromethoxy)piperidine (8.4 g) and 4-(trifluoromethoxymethyl)piperidine (12.9 g) were synthesized in 5 stages starting from 4-hydroxypiperidine (the overall yield 40 %) and 4-(hydroxymethyl)piperidine (the overall yield 13.5 %), respectively.Experimental part. The first stage of the synthetic strategy was acylation of 4-hydroxypiperidine with benzoyl chloride. N-benzoyl-4-hydroxypiperidine obtained was transformed to N-benzoyl-4-(trifluoromethoxy)piperidine in two stages using the Hiyama method (the synthesis of the corresponding S-methyl xanthate with the subsequent desulfurization/fluorination using N-bromosuccinimide and Olah’s reagent). Then the N-benzoyl group was reduced to benzyl one, which was removed using 1-chloroethyl chloroformate. The similar approach was applied to the synthesis of 4-(trifluoromethoxymethyl)piperidine starting from 4-(hydroxymethyl)piperidine. The structure and composition of the compounds synthesized were confrmed by 1Н, 13C and 19F NMR spectroscopy,mass-spectrometry and elemental analysis.Conclusions. The synthetic approach developed is a convenient method for the multigram preparation of4-(trifluoromethoxy)piperidine and 4-(trifluoromethoxymethyl)piperidine and can be used for the synthesis of other secondary amines containing the CF3O-group.Key words: fluorination; trifluoromethoxy group; xanthate; piperidine; protection group

scholarly journals One-pot three-component route for the synthesis of S-trifluoromethyl dithiocarbamates using Togni’s reagent

2017 ◽  
Vol 13 ◽  
pp. 2502-2508 ◽  
Author(s):  
Azim Ziyaei Halimehjani ◽  
Martin Dračínský ◽  
Petr Beier
Keyword(s):  
Carbon Disulfide ◽  
Reasonable Agreement ◽  
Aliphatic Amine ◽  
Variable Temperature ◽  
Secondary Amines ◽  
High Yield ◽  
Similar Reaction ◽  
Primary Aliphatic Amine ◽  
One Pot ◽  
Nmr Study

A one-pot three-component route for the synthesis of S-trifluoromethyl dithiocarbamates by the reaction of secondary amines, carbon disulfide and Togni’s reagent is described. The reactions proceed in moderate to good yields. A similar reaction using a primary aliphatic amine afforded the corresponding isothiocyanate in high yield. A variable temperature NMR study revealed a rotational barrier of 14.6, 18.8, and 15.9 kcal/mol for the C–N bond in the dithiocarbamate moiety of piperidine, pyrrolidine, and diethylamine adducts, respectively. In addition, the calculated barriers of rotation are in reasonable agreement with the experiments.

scholarly journals CuH-Catalyzed Enantioselective Ketone Allylation with 1,3-Dienes: Scope, Mechanism, and Applications

2018 ◽  
Author(s):  
Chengxi Li ◽  
Richard Liu ◽  
Luke T. Jesikiewicz ◽  
Yang Yang ◽  
Peng Liu ◽  
...  
Keyword(s):  
Density Functional ◽  
Building Blocks ◽  
Biologically Active ◽  
High Yield ◽  
Organometallic Reagents ◽  
Carbon Nucleophiles ◽  
Homoallylic Alcohols ◽  
Alcohol Synthesis ◽  
Wide Range ◽  
Pharmaceutical Agents

<p>Chiral tertiary alcohols are important building blocks for the synthesis of pharmaceutical agents and biologically active natural products. The addition of carbon nucleophiles to ketones is the most common approach to tertiary alcohol synthesis, but traditionally relies on stoichiometric organometallic reagents that are difficult to prepare, sensitive, and uneconomical. We describe a mild and efficient method for the copper-catalyzed allylation of ketones, using widely available 1,3-dienes as allylmetal surrogates. Homoallylic alcohols bearing a wide range of functional groups are obtained in high yield and with good regio-, diastereo-, and enantioselectivity. Mechanistic investigations using density functional theory (DFT) implicate the in situ formation of a rapidly equilibrating mixture of isomeric copper(I) allyl complexes, from which Curtin-Hammett kinetics determine the major isomer of product. A stereochemical model is provided to explain the high diastereo- and enantioselectivity of this process. Finally, this method was applied toward the preparation of an important drug, (R)-Procyclidine, and a key intermediate in the synthesis of several pharmaceuticals.</p> <br>

Recent Progress in the Synthesis of Pyrimidine Heterocycles: A Review

2020 ◽  
Vol 24 (10) ◽  
pp. 1055-1096
Author(s):  
Pradip Kumar Maji
Keyword(s):  
Broad Spectrum ◽  
Recent Progress ◽  
Biological Activities ◽  
Building Blocks ◽  
Heterocyclic Ring ◽  
Antibacterial Activities ◽  
Review Article ◽  
Biologically Active ◽  
Synthetic Strategy ◽  
Synthetic Approaches

Pyrimidine heterocycles are proven to be biologically active heterocycles, found in many biological systems, displaying a broad spectrum of biological activities including anticancer, anxiolytic, antioxidant, antiviral, antifungal, anticonvulsant, antidepressant and antibacterial activities. Recently, various synthetic approaches, synthetic strategy, the variation of substrates and study devoted towards the evaluation of biological activities for the pyrimidine heterocycles have been reported in the literature. This review article describes the synthesis of various biologically interesting pyrimidine heterocyclic ring systems using various nitrogen building blocks.

scholarly journals CuH-Catalyzed Enantioselective Ketone Allylation with 1,3-Dienes: Scope, Mechanism, and Applications

2018 ◽  
Author(s):  
Chengxi Li ◽  
Richard Liu ◽  
Luke T. Jesikiewicz ◽  
Yang Yang ◽  
Peng Liu ◽  
...  
Keyword(s):  
Density Functional ◽  
Building Blocks ◽  
Biologically Active ◽  
High Yield ◽  
Organometallic Reagents ◽  
Carbon Nucleophiles ◽  
Homoallylic Alcohols ◽  
Alcohol Synthesis ◽  
Wide Range ◽  
Pharmaceutical Agents

<p>Chiral tertiary alcohols are important building blocks for the synthesis of pharmaceutical agents and biologically active natural products. The addition of carbon nucleophiles to ketones is the most common approach to tertiary alcohol synthesis, but traditionally relies on stoichiometric organometallic reagents that are difficult to prepare, sensitive, and uneconomical. We describe a mild and efficient method for the copper-catalyzed allylation of ketones, using widely available 1,3-dienes as allylmetal surrogates. Homoallylic alcohols bearing a wide range of functional groups are obtained in high yield and with good regio-, diastereo-, and enantioselectivity. Mechanistic investigations using density functional theory (DFT) implicate the in situ formation of a rapidly equilibrating mixture of isomeric copper(I) allyl complexes, from which Curtin-Hammett kinetics determine the major isomer of product. A stereochemical model is provided to explain the high diastereo- and enantioselectivity of this process. Finally, this method was applied toward the preparation of an important drug, (R)-Procyclidine, and a key intermediate in the synthesis of several pharmaceuticals.</p> <br>

Iridium-Catalyzed Silylation of C-H bonds in Unactivated Arenes: A Sterically-Encumbered Phenanthroline Ligand Accelerates Catalysis Enabling New Reactivity

2019 ◽  
Author(s):  
Caleb Karmel ◽  
Zhewei Chen ◽  
John Hartwig
Keyword(s):  
High Activity ◽  
Functional Group ◽  
Activity Analysis ◽  
High Reactivity ◽  
High Yield ◽  
Phen Ligand ◽  
Mechanistic Studies ◽  
Phenanthroline Ligand ◽  
First Time ◽  
New System

We report a new system for the silylation of aryl C-H bonds. The combination of [Ir(cod)(OMe)]<sub>2</sub> and 2,9-Me<sub>2</sub>-phenanthroline (2,9-Me<sub>2</sub>phen) catalyzes the silylation of arenes at lower temperatures and with faster rates than those reported previously, when the hydrogen byproduct is removed, and with high functional group tolerance and regioselectivity. Inhibition of reactions by the H<sub>2</sub> byproduct is shown to limit the silylation of aryl C-H bonds in the presence of the most active catalysts, thereby masking their high activity. Analysis of initial rates uncovered the high reactivity of the catalyst containing the sterically hindered 2,9-Me<sub>2</sub>phen ligand but accompanying rapid inhibition by hydrogen. With this catalyst, under a flow of nitrogen to remove hydrogen, electron-rich arenes, including those containing sensitive functional groups, undergo silylation in high yield for the first time, and arenes that underwent silylation with prior catalysts react over much shorter times with lower catalyst loadings. The synthetic value of this methodology is demonstrated by the preparation of key intermediates in the synthesis of medicinally important compounds in concise sequences comprising silylation and functionalization. Mechanistic studies demonstrate that the cleavage of the aryl C-H bond is reversible and that the higher rates observed with the 2,9-Me<sub>2</sub>phen ligand is due to a more thermodynamically favorable oxidative addition of aryl C-H bonds.

Application of Nitrogen Heterocyclic Carbenes in Organocatalysis

2020 ◽  
Vol 09 ◽  
Author(s):  
Minita Ojha ◽  
R. K. Bansal
Keyword(s):  
Asymmetric Catalysis ◽  
Building Blocks ◽  
Structural Features ◽  
Heterocyclic Carbenes ◽  
Stetter Reaction ◽  
Metal Pollutants ◽  
Synthetic Strategy ◽  
Wide Range ◽  
Benzoin Condensation ◽  
Nitrogen Heterocyclic

Background: During the last two decades, horizon of research in the field of Nitrogen Heterocyclic Carbenes (NHC) has widened remarkably. NHCs have emerged as ubiquitous species having applications in a broad range of fields, including organocatalysis and organometallic chemistry. The NHC-induced non-asymmetric catalysis has turned out to be a really fruitful area of research in recent years. Methods: By manipulating structural features and selecting appropriate substituent groups, it has been possible to control the kinetic and thermodynamic stability of a wide range of NHCs, which can be tolerant to a variety of functional groups and can be used under mild conditions. NHCs are produced by different methods, such as deprotonation of Nalkylhetrocyclic salt, transmetallation, decarboxylation and electrochemical reduction. Results: The NHCs have been used successfully as catalysts for a wide range of reactions making a large number of building blocks and other useful compounds accessible. Some of these reactions are: benzoin condensation, Stetter reaction, Michael reaction, esterification, activation of esters, activation of isocyanides, polymerization, different cycloaddition reactions, isomerization, etc. The present review includes all these examples published during the last 10 years, i.e. from 2010 till date. Conclusion: The NHCs have emerged as versatile and powerful organocatalysts in synthetic organic chemistry. They provide the synthetic strategy which does not burden the environment with metal pollutants and thus fit in the Green Chemistry.

scholarly journals Optimized Supercritical CO2 Extraction Enhances the Recovery of Valuable Lipophilic Antioxidants and Other Constituents from Dual-Purpose Hop (Humulus lupulus L.) Variety Ella

Antioxidants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 918
Author(s):  
Nóra Emilia Nagybákay ◽  
Michail Syrpas ◽  
Vaiva Vilimaitė ◽  
Laura Tamkutė ◽  
Audrius Pukalskas ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
Antioxidant Properties ◽  
Extraction Yield ◽  
Biologically Active ◽  
High Yield ◽  
Acid Extraction ◽  
Supercritical Co2 Extraction ◽  
Bioactive Constituents ◽  
Total Extract

The article presents the optimization of supercritical CO2 extraction (SFE-CO2) parameters using response surface methodology (RSM) with central composite design (CCD) in order to produce single variety hop (cv. Ella) extracts with high yield and strong in vitro antioxidant properties. Optimized SFE-CO2 (37 MPa, 43 °C, 80 min) yielded 26.3 g/100 g pellets of lipophilic fraction. This extract was rich in biologically active α- and β-bitter acids (522.8 and 345.0 mg/g extract, respectively), and exerted 1481 mg TE/g extract in vitro oxygen radical absorbance capacity (ORAC). Up to ~3-fold higher extraction yield, antioxidant recovery (389.8 mg TE/g pellets) and exhaustive bitter acid extraction (228.4 mg/g pellets) were achieved under the significantly shorter time compared to the commercially used one-stage SFE-CO2 at 10–15 MPa and 40 °C. Total carotenoid and chlorophyll content was negligible, amounting to <0.04% of the total extract mass. Fruity, herbal, spicy and woody odor of extracts could be attributed to the major identified volatiles, namely β-pinene, β-myrcene, β-humulene, α-humulene, α-selinene and methyl-4-decenoate. Rich in valuable bioactive constituents and flavor compounds, cv. Ella hop SFE-CO2 extracts could find multipurpose applications in food, pharmaceutical, nutraceutical and cosmetics industries.

scholarly journals Bacterial cellulose spheroids as building blocks for 3D and patterned living materials and for regeneration

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Joaquin Caro-Astorga ◽  
Kenneth T. Walker ◽  
Natalia Herrera ◽  
Koon-Yang Lee ◽  
Tom Ellis
Keyword(s):  
Bacterial Cellulose ◽  
Building Blocks ◽  
Genetically Engineered ◽  
High Yield ◽  
Synthetic Materials ◽  
Chemical Inputs ◽  
First Time ◽  
3D Shapes ◽  
Promising Avenue ◽  
Living Materials

AbstractEngineered living materials (ELMs) based on bacterial cellulose (BC) offer a promising avenue for cheap-to-produce materials that can be programmed with genetically encoded functionalities. Here we explore how ELMs can be fabricated in a modular fashion from millimetre-scale biofilm spheroids grown from shaking cultures of Komagataeibacter rhaeticus. Here we define a reproducible protocol to produce BC spheroids with the high yield bacterial cellulose producer K. rhaeticus and demonstrate for the first time their potential for their use as building blocks to grow ELMs in 3D shapes. Using genetically engineered K. rhaeticus, we produce functionalized BC spheroids and use these to make and grow patterned BC-based ELMs that signal within a material and can sense and report on chemical inputs. We also investigate the use of BC spheroids as a method to regenerate damaged BC materials and as a way to fuse together smaller material sections of cellulose and synthetic materials into a larger piece. This work improves our understanding of BC spheroid formation and showcases their great potential for fabricating, patterning and repairing ELMs based on the promising biomaterial of bacterial cellulose.

Sign in / Sign up

Export Citation Format

Share Document