scholarly journals Volcanic Lateral Collapse Processes in Mafic Arc Edifices: A Review of Their Driving Processes, Types and Consequences

2021 ◽  
Vol 9 ◽  
Author(s):  
Jorge E. Romero ◽  
Margherita Polacci ◽  
Sebastian Watt ◽  
Shigeru Kitamura ◽  
Daniel Tormey ◽  
...  

Volcanic cones are frequently near their gravitational stability limit, which can lead to lateral collapse of the edifice, causing extensive environmental impact, property damage, and loss of life. Here, we examine lateral collapses in mafic arc volcanoes, which are relatively structurally simple edifices dominated by a narrow compositional range from basalts to basaltic andesites. This still encompasses a broad range of volcano dimensions, but the magma types erupted in these systems represent the most abundant type of volcanism on Earth and rocky planets. Their often high magma output rates can result in rapid construction of gravitationally unstable edifices susceptible both to small landslides but also to much larger-scale catastrophic lateral collapses. Although recent studies of basaltic shield volcanoes provide insights on the largest subaerial lateral collapses on Earth, the occurrence of lateral collapses in mafic arc volcanoes lacks a systematic description, and the features that make such structures susceptible to failure has not been treated in depth. In this review, we address whether distinct characteristics lead to the failure of mafic arc volcanoes, or whether their propensity to collapse is no different to failures in volcanoes dominated by intermediate (i.e., andesitic-dacitic) or silicic (i.e., rhyolitic) compositions? We provide a general overview on the stability of mafic arc edifices, their potential for lateral collapse, and the overall impact of large-scale sector collapse processes on the development of mafic magmatic systems, eruptive style and the surrounding landscape. Both historical accounts and geological evidence provide convincing proofs of recurrent (and even repetitive) large-scale (>0.5 km3) lateral failure of mafic arc volcanoes. The main factors contributing to edifice instability in these volcanoes are: (1) frequent sheet-like intrusions accompanied by intense deformation and seismicity; (2) shallow hydrothermal systems weakening basaltic rocks and reducing their overall strength; (3) large edifices with slopes near the critical angle; (4) distribution along fault systems, especially in transtensional settings, and; (5) susceptibility to other external forces such as climate change. These factors are not exclusive of mafic volcanoes, but probably enhanced by the rapid building of such edifices.

2019 ◽  
Vol 11 (09) ◽  
pp. 1950085 ◽  
Author(s):  
Amin Hajarian ◽  
Mahdi Moghimi Zand ◽  
Naeem Zolfaghari

Dispersion forces such as van der Waals and Casimir interactions become important when the size of structures shrinks. Therefore, the effective design of micro and nano-sized structures depends on appropriate consideration of these forces. In the current research, we analyzed the effect of dispersion forces on the dynamic behavior of a micro/nanobeam actuated by electrostatic forces subject to a mechanical shock. We used the Euler–Bernoulli beam theory including nonlinearities due to mid-plane stretching in our model. The equation of motion is solved using time-dependent finite element method, and pull-in forces are calculated. The stability regimes are evaluated as the set of three force parameters in which the beam elasticity overcomes the external forces, and the beam is able to vibrate without hitting the substrate. Results show that the design of the beam should be such that the three sets of non-dimensional parameters that determine the intensity of shock, dispersion, and electrostatic force do not fall above the stability limit to avoid pull-in instability. Our results have applications in the design of electrostatically actuated micro/nanobeams in mechanical shock environments such as accelerometers.


2013 ◽  
Vol 732 ◽  
pp. 485-509 ◽  
Author(s):  
Ayah Lazar ◽  
A. Stegner ◽  
R. Caldeira ◽  
C. Dong ◽  
H. Didelle ◽  
...  

AbstractLarge-scale laboratory experiments were performed on the Coriolis rotating platform to study the stability of intense vortices in a thin stratified layer. A linear salt stratification was set in the upper layer on top of a thick barotropic layer, and a cylinder was towed in the upper layer to produce shallow cyclones and anticyclones of similar size and intensity. We focus our investigations on submesoscale eddies, where the radius is smaller than the baroclinic deformation radius. Towing speed, cylinder size and stratification were changed in order to cover a large range of the parameter space, staying in a relatively high horizontal Reynolds number ($Re= 2000{{\unicode{x2013}}}7000$). The Rayleigh criterion states that inertial instabilities should strongly destabilize intense anticyclonic eddies if the vorticity in the vortex core is negative enough ${\zeta }_{0} / f\lt - 1$, where ${\zeta }_{0} $ is the relative vorticity in the core of the vortex, and $f$ is the Coriolis parameter. However, we found that some anticyclones remain stable even for very intense negative vorticity values, up to ${\zeta }_{0} / f= - 3. 5$, when the Burger number is large enough. This is in agreement with the linear stability analysis performed in part 1 (J. Fluid Mech., vol. 732, 2013, pp. 457–484), which shows that the combined effect of a strong stratification and a moderate vertical dissipation may stabilize even very intense anticyclones, and the unstable eddies we found were located close to the marginal stability limit. Hence, these experimental results agree well with the simple stability diagram proposed in the Rossby, Burger and Ekman parameter space for inertial destabilization of viscous anticyclones within a shallow and stratified layer.


Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 757
Author(s):  
Huiyi Shang ◽  
Danni Yang ◽  
Dairong Qiao ◽  
Hui Xu ◽  
Yi Cao

Levan has wide applications in chemical, cosmetic, pharmaceutical and food industries. The free levansucrase is usually used in the biosynthesis of levan, but the poor reusability and low stability of free levansucrase have limited its large-scale use. To address this problem, the surface-displayed levansucrase in Saccharomyces cerevisiae were generated and evaluated in this study. The levansucrase from Zymomonas mobilis was displayed on the cell surface of Saccharomyces cerevisiae EBY100 using a various yeast surface display platform. The N-terminal fusion partner is based on a-agglutinin, and the C-terminal one is Flo1p. The yield of levan produced by these two whole-cell biocatalysts reaches 26 g/L and 34 g/L in 24 h, respectively. Meanwhile, the stability of the surface-displayed levansucrases is significantly enhanced. After six reuses, these two biocatalysts retained over 50% and 60% of their initial activities, respectively. Furthermore, the molecular weight and polydispersity test of the products suggested that the whole-cell biocatalyst of levansucrase displayed by Flo1p has more potentials in the production of levan with low molecular weight which is critical in certain applications. In conclusion, our method not only enable the possibility to reuse the enzyme, but also improves the stability of the enzyme.


Genetics ◽  
1974 ◽  
Vol 76 (2) ◽  
pp. 289-299
Author(s):  
Margaret McCarron ◽  
William Gelbart ◽  
Arthur Chovnick

ABSTRACT A convenient method is described for the intracistronic mapping of genetic sites responsible for electrophoretic variation of a specific protein in Drosophila melanogaster. A number of wild-type isoalleles of the rosy locus have been isolated which are associated with the production of electrophoretically distinguishable xanthine dehydrogenases. Large-scale recombination experiments were carried out involving null enzyme mutants induced on electrophoretically distinct wild-type isoalleles, the genetic basis for which is followed as a nonselective marker in the cross. Additionally, a large-scale recombination experiment was carried out involving null enzyme rosy mutants induced on the same wild-type isoallele. Examination of the electrophoretic character of crossover and convertant products recovered from the latter experiment revealed that all exhibited the same parental electrophoretic character. In addition to documenting the stability of the xanthine dehydrogenase electrophoretic character, this observation argues against a special mutagenesis hypothesis to explain conversions resulting from allele recombination studies.


2021 ◽  
Vol 11 (5) ◽  
pp. 2098
Author(s):  
Heyi Wei ◽  
Wenhua Jiang ◽  
Xuejun Liu ◽  
Bo Huang

Knowledge of the sunshine requirements of landscape plants is important information for the adaptive selection and configuration of plants for urban greening, and is also a basic attribute of plant databases. In the existing studies, the light compensation point (LCP) and light saturation point (LSP) have been commonly used to indicate the shade tolerance for a specific plant; however, these values are difficult to adopt in practice because the landscape architect does not always know what range of solar radiation is the best for maintaining plant health, i.e., normal growth and reproduction. In this paper, to bridge the gap, we present a novel digital framework to predict the sunshine requirements of landscape plants. First, the research introduces the proposed framework, which is composed of a black-box model, solar radiation simulation, and a health standard system for plants. Then, the data fitting between solar radiation and plant growth response is used to obtain the value of solar radiation at different health levels. Finally, we adopt the LI-6400XT Portable Photosynthetic System (Li-Cor Inc., Lincoln, NE, USA) to verify the stability and accuracy of the digital framework through 15 landscape plant species of a residential area in the city of Wuhan, China, and also compared and analyzed the results of other researchers on the same plant species. The results show that the digital framework can robustly obtain the values of the healthy, sub-healthy, and unhealthy levels for the 15 landscape plant species. The purpose of this study is to provide an efficient forecasting tool for large-scale surveys of plant sunshine requirements. The proposed framework will be beneficial for the adaptive selection and configuration of urban plants and will facilitate the construction of landscape plant databases in future studies.


Data ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 4
Author(s):  
Evgeny Mikhailov ◽  
Daniela Boneva ◽  
Maria Pashentseva

A wide range of astrophysical objects, such as the Sun, galaxies, stars, planets, accretion discs etc., have large-scale magnetic fields. Their generation is often based on the dynamo mechanism, which is connected with joint action of the alpha-effect and differential rotation. They compete with the turbulent diffusion. If the dynamo is intensive enough, the magnetic field grows, else it decays. The magnetic field evolution is described by Steenbeck—Krause—Raedler equations, which are quite difficult to be solved. So, for different objects, specific two-dimensional models are used. As for thin discs (this shape corresponds to galaxies and accretion discs), usually, no-z approximation is used. Some of the partial derivatives are changed by the algebraic expressions, and the solenoidality condition is taken into account as well. The field generation is restricted by the equipartition value and saturates if the field becomes comparable with it. From the point of view of mathematical physics, they can be characterized as stable points of the equations. The field can come to these values monotonously or have oscillations. It depends on the type of the stability of these points, whether it is a node or focus. Here, we study the stability of such points and give examples for astrophysical applications.


2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Xianyue Li ◽  
Yufei Pang ◽  
Chenxia Zhao ◽  
Yang Liu ◽  
Qingzhen Dong

AbstractGraph partition is a classical combinatorial optimization and graph theory problem, and it has a lot of applications, such as scientific computing, VLSI design and clustering etc. In this paper, we study the partition problem on large scale directed graphs under a new objective function, a new instance of graph partition problem. We firstly propose the modeling of this problem, then design an algorithm based on multi-level strategy and recursive partition method, and finally do a lot of simulation experiments. The experimental results verify the stability of our algorithm and show that our algorithm has the same good performance as METIS. In addition, our algorithm is better than METIS on unbalanced ratio.


Author(s):  
Marta J. Reith ◽  
Daniel Bachrathy ◽  
Gabor Stepan

Multi-cutter turning systems bear huge potential in increasing cutting performance. In this study we show that the stable parameter region can be extended by the optimal tuning of system parameters. The optimal parameter regions can be identified by means of stability charts. Since the stability boundaries are highly sensitive to the dynamical parameters of the machine tool, the reliable exploitation of the so-called stability pockets is limited. Still, the lower envelope of the stability lobes is an appropriate upper boundary function for optimization purposes with an objective function taken for maximal material removal rates. This lower envelope is computed by the Robust Stability Computation method presented in the paper. It is shown in this study, that according to theoretical results obtained for optimally tuned cutters, the safe stable machining parameter region can significantly be extended, which has also been validated by machining tests.


2016 ◽  
Vol 28 (14) ◽  
pp. 1886-1904 ◽  
Author(s):  
Vijaya VN Sriram Malladi ◽  
Mohammad I Albakri ◽  
Serkan Gugercin ◽  
Pablo A Tarazaga

A finite element (FE) model simulates an unconstrained aluminum thin plate to which four macro-fiber composites are bonded. This plate model is experimentally validated for single and multiple inputs. While a single input excitation results in the frequency response functions and operational deflection shapes, two input excitations under prescribed conditions result in tailored traveling waves. The emphasis of this article is the application of projection-based model reduction techniques to scale-down the large-scale FE plate model. Four model reduction techniques are applied and their performances are studied. This article also discusses the stability issues associated with the rigid-body modes. Furthermore, the reduced-order models are utilized to simulate the steady-state frequency and time response of the plate. The results are in agreement with the experimental and the full-scale FE model results.


Sign in / Sign up

Export Citation Format

Share Document