scholarly journals Analysis of Failure Models and Deformation Evolution Process of Geological Hazards in Ganzhou City, China

2021 ◽  
Vol 9 ◽  
Author(s):  
Qinghua Zhan ◽  
Shimei Wang ◽  
Li Wang ◽  
Fei Guo ◽  
Daipeng Zhao ◽  
...  
Keyword(s):  
Slope Failure ◽  
Field Investigation ◽  
Small Scale ◽  
Rock Stratum ◽  
Deformation And Failure ◽  
Different Types ◽  
Slope Collapse ◽  
Clastic Sedimentary ◽  
And Control

In Ganzhou City, China, a complex bedrock lithology and structure, diverse topography, frequent engineering works, and abundant rainfall generate frequent, sudden, small-scale landslides that are difficult to prevent and control. This study integrates evidence data from a field investigation of landslides with geological-engineering analogues to document the distribution and development of these geohazards in Ganzhou City. Based on the distribution of landslides across different types of bedrock and soil, we identify five lithological groups prone to slope failure: granite, metamorphics (slate and phyllite), red sedimentary layers, clastic sedimentary rocks with weak interlayers, and loose Quaternary deposits. Granite and metamorphic bedrock are the two lithologies most prone to landslides. Our analysis of the genesis and mode of slope failure suggests that most landslides in Ganzhou City originated from four modes of slope failure: scouring erosion collapse, steep slope collapse, rock sliding along a rock stratum, and wedge-shaped block sliding and caving. An in-situ model test and numerical simulations were used to explore the evolution of slope deformation and failure on the most landslide-prone lithological groups, and the accumulation of debris post-failure. This work provides a reference for the assessment of the risk from, and the management of, landslide geohazards in Ganzhou City and geologically similar regions.

Investigation of rainfall-induced failure processes and characteristics of wedge slopes using physical models

2020 ◽  
Author(s):  
Chia-Ming Lo ◽  
Chen-Han Chu ◽  
Yi-Xiang Su
Keyword(s):  
Physical Modeling ◽  
Slope Failure ◽  
Wedge Angle ◽  
Physical Models ◽  
Small Scale ◽  
Intersection Angle ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Free Falling ◽  
The Impact

<p>In this study, the small-scale physical modeling tests have considered the impact of the infiltration of rainfall in order to investigate the processes involved in wedge slope deformation and failure. We are conducted under controlled conditions of the intersection angle and half wedge angle. Observations obtained during each stage of deformation and failure were used to explain how gravity deformation varies on wedge slopes, and infer how rainfall influence slope failure. The results indicate that half wedge angle is a crucial factor in the deformation failure of slopes. The failure mechanisms of low intersection angle slopes (sliding model) differ considerably from those of high intersection angle slopes (free falling or toppling model). The infiltration of surface water can have a significant influence on rock layer deformation and the speed of failure. Details of the failure characteristics of wedge slope models are discussed in this paper.</p><p><strong>Keywords:</strong> physical modeling, rainfall, wedge slope, the intersection angle, half wedge angle.</p>

Observations of the Failure of a Vertical Cut in Clay at Welland, Ontario

1971 ◽  
Vol 8 (2) ◽  
pp. 283-298 ◽  
Author(s):  
D. Kwan
Keyword(s):  
Pore Pressure ◽  
Slope Failure ◽  
Field Investigation ◽  
Surface Strain ◽  
Stable Slope ◽  
Undrained Strength

Results of an instrumented test excavation in Welland clay are presented with analysis, discussion, and conclusions. The field investigation includes an observation of a deep vertical slope failure as well as an inclined stable slope, and measurements of pore pressure and surface strain. The average in situ undrained strength indicates that the soil deposit excavated in the area is not soft.

A computer-control program for TEM in situ fatigue experiments

1989 ◽  
Vol 47 ◽  
pp. 620-621
Author(s):  
Kenneth S. Vecchio ◽  
John A. Hunt
Keyword(s):  
Slow Crack Growth ◽  
Computer Control ◽  
Control Program ◽  
Video Tape ◽  
Computer Control System ◽  
Transmission Electron ◽  
In Situ Experiments ◽  
Tremendous Amount ◽  
And Control

In-situ experiments conducted within a transmission electron microscope provide the operator a unique opportunity to directly observe microstructural phenomena, such as phase transformations and dislocation-precipitate interactions, “as they happen”. However, in-situ experiments usually require a tremendous amount of experimental preparation beforehand, as well as, during the actual experiment. In most cases the researcher must operate and control several pieces of equipment simultaneously. For example, in in-situ deformation experiments, the researcher may have to not only operate the TEM, but also control the straining holder and possibly some recording system such as a video tape machine. When it comes to in-situ fatigue deformation, the experiments became even more complicated with having to control numerous loading cycles while following the slow crack growth. In this paper we will describe a new method for conducting in-situ fatigue experiments using a camputer-controlled tensile straining holder.The tensile straining holder used with computer-control system was manufactured by Philips for the Philips 300 series microscopes. It was necessary to modify the specimen stage area of this holder to work in the Philips 400 series microscopes because the distance between the optic axis and holder airlock is different than in the Philips 300 series microscopes. However, the program and interfacing can easily be modified to work with any goniometer type straining holder which uses a penrmanent magnet motor.

Knowledge and Awareness of Dengue Fever

2018 ◽  
pp. 219-222
Author(s):  
Y. Arockia Suganthi ◽  
Chitra K. ◽  
J. Magelin Mary
Keyword(s):  
Dengue Fever ◽  
Prevention And Control ◽  
Control Measures ◽  
Infection Transmission ◽  
Standard Guideline ◽  
The World ◽  
Different Types ◽  
Prevention And Control Measures ◽  
Dengue Prevention ◽  
And Control

Dengue fever is a painful mosquito-borne infection caused by different types of virus in various localities of the world. There is no particular medicine or vaccine to treat person suffering from dengue fever. Dengue viruses are transmitted by the bite of female Aedes (Ae) mosquitoes. Dengue fever viruses are mainly transmitted by Aedes which can be active in tropical or subtropical climates. Aedes Aegypti is the key step to avoid infection transmission to save millions of people in all over the world. This paper provides a standard guideline in the planning of dengue prevention and control measures. At the same time gives the priorities including clinical management and hospitalized dengue patients have to address essentially.

Pb Electrodeposition in the Presence of Chlorine Ions on Cu(100): An in Situ Optical Reflectivity Difference Study

2003 ◽  
Vol 781 ◽  
Author(s):  
J. Gray ◽  
W. Schwarzacher ◽  
X.D. Zhu
Keyword(s):  
Oblique Incidence ◽  
Opposite Sign ◽  
Bulk Phase ◽  
Phase Layer ◽  
Optical Reflectivity ◽  
Scan Rate ◽  
Different Types ◽  
Chlorine Ions ◽  
High Overpotentials

AbstractWe studied the initial stages of the electrodeposition of Pb in the presence of chlorine ions on Cu(100), using an oblique-incidence optical reflectivity difference (OIRD) technique. The OI-RD results reveal that immediately following the underpotential deposition (UPD) of the first Pb monolayer, two different types of bulk-phase films grow depending upon the magnitude of overpotential and cyclic voltammetry (CV) scan rate. At low overpotentials and/or slow scan rates, we propose that a bulk-phase Pb film grows on top of the UPD monolayer. At high overpotentials and/or fast scan rates, either a PbO, PbCl2, or a rough Pb bulk-phase layer grows on top of the UPD layer such that the reflectivity difference signal from such a film has an opposite sign.

Präzisions-Forstwirtschaft – was ist das? | Precision forestry – what's that?

2007 ◽  
Vol 158 (8) ◽  
pp. 235-242 ◽  
Author(s):  
Hans Rudolf Heinimann
Keyword(s):  
Business Processes ◽  
Spatial Scales ◽  
Supply Chain Coordination ◽  
Sensor Technology ◽  
Small Scale ◽  
Soil Physics ◽  
Coordination Problem ◽  
Precision Engineering ◽  
Precision Forestry ◽  
And Control

The term «precision forestry» was first introduced and discussed at a conference in 2001. The aims of this paper are to explore the scientific roots of the precision concept, define «precision forestry», and sketch the challenges that the implementation of this new concept may present to practitioners, educators, and researchers. The term «precision» does not mean accuracy on a small scale, but instead refers to the concurrent coordination and control of processes at spatial scales between 1 m and 100 km. Precision strives for an automatic control of processes. Precision land use differs from precision engineering by the requirements of gathering,storing and managing spatio-temporal variability of site and vegetation parameters. Practitioners will be facing the challenge of designing holistic, standardized business processes that are valid for whole networks of firms,and that follow available standards (e.g., SCOR, WoodX). There is a need to educate and train forestry professionals in the areas of business process re-engineering, computer supported management of business transactions,methods of remote sensing, sensor technology and control theory. Researchers will face the challenge of integrating plant physiology, soil physics and production sciences and solving the supply chain coordination problem (SCCP).

The Artificial Pancreas in Cyborg Bodies

2020 ◽  
pp. 412-430
Author(s):  
Anthony Ryan Hatch ◽  
Julia T. Gordon ◽  
Sonya R. Sternlieb
Keyword(s):  
Glucose Sensor ◽  
Social Inequalities ◽  
Infusion Pump ◽  
Artificial Pancreas ◽  
Small Scale ◽  
Glucose Levels ◽  
Loop Design ◽  
Access To Health ◽  
Do It Yourself ◽  
And Control

The new artificial pancreas system includes a body-attached blood glucose sensor that tracks glucose levels, a worn insulin infusion pump that communicates with the sensor, and features new software that integrates the two systems. The artificial pancreas is purportedly revolutionary because of its closed-loop design, which means that the machine can give insulin without direct patient intervention. It can read a blood sugar and administer insulin based on an algorithm. But, the hardware for the corporate artificial pancreas is expensive and its software code is closed-access. Yet, well-educated, tech-savvy diabetics have been fashioning their own fully automated do-it-yourself (DIY) artificial pancreases for years, relying on small-scale manufacturing, open-source software, and inventive repurposing of corporate hardware. In this chapter, we trace the corporate and DIY artificial pancreases as they grapple with issues of design and accessibility in a content where not everyone can become a diabetic cyborg. The corporate artificial pancreas offers the cyborg low levels of agency and no ownership and control over his or her own data; it also requires access to health insurance in order to procure and use the technology. The DIY artificial pancreas offers patients a more robust of agency but also requires high levels of intellectual capital to hack the devices and make the system work safely. We argue that efforts to increase agency, radically democratize biotechnology, and expand information ownership in the DIY movement are characterized by ideologies and social inequalities that also define corporate pathways.

Miniature Bioreactors for Rapid Bioprocess Development of Mammalian Cell Culture

2012 ◽  
Vol 59 (1) ◽  
Author(s):  
Mohd Helmi Sani ◽  
Frank Baganz
Keyword(s):  
Cell Culture ◽  
Mammalian Cell ◽  
Process Development ◽  
Mammalian Cell Culture ◽  
Small Scale ◽  
Cell Culture Process ◽  
Deep Wells ◽  
Working Volume ◽  
Culture Process ◽  
And Control

At present, there are a number of commercial small scale shaken systems available on the market with instrumented controllable microbioreactors such as Micro–24 Microreactor System (Pall Corporation, Port Washington, NY) and M2P Biolector, (M2P Labs GmbH, Aachen, Germany). The Micro–24 system is basically an orbital shaken 24–well plate that operates at working volume 3 – 7 mL with 24 independent reactors (deep wells, shaken and sparged) running simultaneously. Each reactor is designed as single use reactor that has the ability to continuously monitor and control the pH, DO and temperature. The reactor aeration is supplied by sparging air from gas feeds that can be controlled individually. Furthermore, pH can be controlled by gas sparging using either dilute ammonia or carbon dioxide directly into the culture medium through a membrane at the bottom of each reactor. Chen et al., (2009) evaluated the Micro–24 system for the mammalian cell culture process development and found the Micro–24 system is suitable as scaledown tool for cell culture application. The result showed that intra-well reproducibility, cell growth, metabolites profiles and protein titres were scalable with 2 L bioreactors.

scholarly journals Upscaling THM modeling from small-scale to full-scale in-situ experiments in the Callovo-Oxfordian claystone

2021 ◽  
Vol 144 ◽  
pp. 104582
Author(s):  
D.M. Seyedi ◽  
C. Plúa ◽  
M. Vitel ◽  
G. Armand ◽  
J. Rutqvist ◽  
...  
Keyword(s):  
Full Scale ◽  
Small Scale ◽  
In Situ Experiments

Risk Evaluation for Conflicts between Crossing Pedestrians and Right-Turning Vehicles at Intersections

2021 ◽  
pp. 036119812110318
Author(s):  
Feifei Xin ◽  
Xiaobo Wang ◽  
Chongjing Sun
Keyword(s):  
Traffic Management ◽  
Traffic Signals ◽  
Control Measures ◽  
Video Information ◽  
Fuzzy Clustering Method ◽  
Different Types ◽  
Micro Level ◽  
Conflict Risk ◽  
And Control ◽  
Deceleration Time

In recent years, conflicts between crossing pedestrians and right-turning vehicles have become more severe at intersections in China, where right-turning vehicles are usually not controlled by traffic signals. This study proposes a quantitative method for evaluating the conflict risk between pedestrians and right-turning vehicles at intersections based on micro-level behavioral data obtained from video detection. A typical intersection in Shanghai was selected as the study site. In total, 670 min of video were recorded during the peak hours from 7:30 a.m. to 9:30 p.m on one day. After processing the video information, vehicle and pedestrian tracking data were obtained, including the velocity, acceleration, deceleration, time, and location coordinates. Based on these data, several conflict indicators were proposed and these indicators were extracted automatically using MATLAB to identify pedestrian–right-turning vehicle conflicts and to determine the severity of the conflicts identified. This process identified 93 examples of such conflicts. The conflict risks were quantitatively classified using the K-means fuzzy clustering method and all of the conflicts were assigned to five grades. The characteristics of the conflict distribution and the severity of different types of conflict were also analyzed, which showed that conflicts on different areas on the crosswalk differed in their severity. Based on the conclusions, practical traffic management and control measures are proposed to reduce the risk on pedestrian crossings.

Sign in / Sign up

Export Citation Format

Share Document