scholarly journals Rapid In-Field Approaches for Delineating VOC in Both Soil Vapour and Groundwater for Vapour Intrusion Assessment

2021 ◽  
Vol 9 ◽  
Author(s):  
Liang Wang ◽  
Ying Cheng ◽  
Ravi Naidu ◽  
Peter Gell ◽  
Mark Bowman
Keyword(s):  
Structural Integrity ◽  
Rapid Assessment ◽  
Cost Effective ◽  
Source Zone ◽  
Contaminated Site ◽  
Channel Network ◽  
Existing Building ◽  
Contour Maps ◽  
Site Characterisation ◽  
High Level

Traditional contaminated site characterisation approaches are time-consuming, labour-intensive, and demand a high level of expertise. This case study provides a rapid field-based solution to investigating a VOC contaminated site and its vapour incursion by combining soil vapour and groundwater survey. To fully assess the volatile organic compound (VOC) distribution in a contaminated site, a number of self-developed soil vapour sampling probes (SVSPs) were placed vertically at different locations in a grid with different depths. Hence, 3D subsurface contour maps for VOC concentrations in soil vapour can be obtained and used to help identify hot spots and the migration patterns of VOCs. This SVSP is “easy-to-install” in the field and a cost-effective solution for rapid assessment of soil vapour samples. The SVSPs can be installed both vertically and horizontally. If there is a requirement to take soil vapour samples beneath an existing building from a potential contamination source zone, SVSPs can be horizontally installed beneath the building without compromising its structural integrity. In addition, to ascertain the correct groundwater channels that are likely to carry contaminants from a potential source zone, an electrical resistivity tomography technique was employed to provide the preliminary information for groundwater delineation in a complex groundwater channel network.

Offloading Operability of Small Scale AG FLNG With Side-by-Side Moored Small Scale LNG Carrier in Offshore West Africa

2017 ◽  
Author(s):  
Mun-sung Kim ◽  
Eric Morilhat ◽  
X. C. Nguyen ◽  
Bo-hee Kim ◽  
Jung-moon Jang ◽  
...  
Keyword(s):  
West Africa ◽  
Relative Motion ◽  
Structural Integrity ◽  
Effective Means ◽  
Production Capacity ◽  
Cost Effective ◽  
Body Motion ◽  
Small Scale ◽  
Associated Gas ◽  
High Level

This study describes one of the technical solutions for Small Scale FLNG (SSFLNG)[1] development specifically designed to monetize Associated Gas (AG) of producing oil fields located within convenient distance of an existing LNG Plant or Port with LNG storage facility. Limited production capacity combined with short range small scale LNG carriers (SSLNGC), provide a cost effective means for LNG production. Ship to ship off-loading operation by loading arm has been considered in AG SSFLNG. Produced LNG is to be off-loaded from the SSFLNG to side-by-side moored SSLNGC. Relative motion and dynamic load acting on loading arm system in side-by-side mooring arrangement is one of key factors to estimate the offloading operability of the AG SSFLNG. In this paper, a numerical two-body motion analysis for the side-by-side moored SSFLNG in frequency- and time-domain is carried out. Also, the basic engineering work is carried out for the marine loading arms (MLA). Since the MLA reacts approximately as a linear system, it is calculated by a full spectral RAO analysis for each of the worst load cases issued from the spectral ranking. All loads and stresses inside the MLA are verified in accordance with EN1474-1[2] for the situations identified in the previous step. A high level fatigue analysis focused on the cryogenic swivel joints is carried out. Based on the numerical calculation for relative motion in side-by-side moored FLNG, we have been performed structural assessment for MLA in several environment conditions. The structural integrity of both MLA and the LNGC manifold are validated during offloading for Offshore West Africa.

scholarly journals Bayesian maintenance decision optimisation based on computing the information value from condition inspections

2021 ◽  
pp. 1748006X2097812
Author(s):  
Guang Zou ◽  
Kian Banisoleiman ◽  
Arturo González
Keyword(s):  
Decision Making ◽  
Structural Integrity ◽  
Fatigue Cracking ◽  
Cost Effective ◽  
Offshore Structures ◽  
Information Value ◽  
Bayesian Decision ◽  
Maintenance Strategies ◽  
Optimal Maintenance ◽  
Maintenance Decision

A challenge in marine and offshore engineering is structural integrity management (SIM) of assets such as ships, offshore structures, mooring systems, etc. Due to harsh marine environments, fatigue cracking and corrosion present persistent threats to structural integrity. SIM for such assets is complicated because of a very large number of rewelded plates and joints, for which condition inspections and maintenance are difficult and expensive tasks. Marine SIM needs to take into account uncertainty in material properties, loading characteristics, fatigue models, detection capacities of inspection methods, etc. Optimising inspection and maintenance strategies under uncertainty is therefore vital for effective SIM and cost reductions. This paper proposes a value of information (VoI) computation and Bayesian decision optimisation (BDO) approach to optimal maintenance planning of typical fatigue-prone structural systems under uncertainty. It is shown that the approach can yield optimal maintenance strategies reliably in various maintenance decision making problems or contexts, which are characterized by different cost ratios. It is also shown that there are decision making contexts where inspection information doesn’t add value, and condition based maintenance (CBM) is not cost-effective. The CBM strategy is optimal only in the decision making contexts where VoI > 0. The proposed approach overcomes the limitation of CBM strategy and highlights the importance of VoI computation (to confirm VoI > 0) before adopting inspections and CBM.

Subsurface fracture surveys using a borehole television camera and acoustic televiewer

1987 ◽  
Vol 24 (4) ◽  
pp. 499-508 ◽  
Author(s):  
J. S. O. Lau ◽  
L. F. Auger ◽  
J. G. Bisson
Keyword(s):  
Rapid Assessment ◽  
Cost Effective ◽  
Fracture Aperture ◽  
Computer Data ◽  
Fracture Characteristics ◽  
Television Camera ◽  
Strip Chart ◽  
Data Record ◽  
Magnetic North ◽  
Apparent Orientation

Borehole television survey and acoustic televiewer logging provide rapid, cost-effective, and accurate methods of surveying fractures and their characteristics within boreholes varying in diameter from 7.6 to 15.3 cm. In the television survey, a camera probe is used to inspect the borehole walls. Measurements of location, orientation, infilling width, and aperture of fractures are made on the television screen and recorded on computer data record sheets. All observations are recorded on video cassette tapes. With the acoustic televiewer, oriented images of fractures in the borehole walls are recorded on a strip–chart log and also on video cassette tapes. The images are displayed as if the walls were split vertically along magnetic north and spread out horizontally. Measurements of fracture characteristics are made on the strip–chart log, using a digitizing table and a microcomputer, and the data recorded on floppy diskettes. In both surveys, an inclined fracture is displayed as a sinusoidal curve, from which the apparent orientation of the fracture can be measured. Once the borehole orientation is known, the true orientation of the fracture can be computed from its apparent orientation. Computer analysis of the fracture data, provides a rapid assessment of fracture occurrence, fracture aperture, and statistically significant concentrations of fracture orientations. Key words: borehole, television survey, acoustic televiewer logging, fractures, distribution, orientation, aperture.

Cost-Effective Directional Drilling and Logging-While-Drilling Operational/Maintenance Model Aids an East Africa Operator to Deliver Its Remote Location Exploration Campaign

2016 ◽  
Author(s):  
Iain Lunney
Keyword(s):  
Low Cost ◽  
Commodity Prices ◽  
Cost Effective ◽  
Directional Drilling ◽  
Remote Maintenance ◽  
Support Team ◽  
High Level ◽  
Remote Assistance ◽  
Level Of Experience ◽  
Maintenance Model

ABSTRACT In a cost-sensitive market driven by depressed commodity prices, significant capital challenges exist for operators interested in pursuing exploration activities in remote environments to define their producible reserves. This paper explores the organizational and operational model developed by a service company over several remote area mobilizations; this model resulted in an optimized low-cost service delivery model characterized by top quartile operational key performance indicators (KPIs). The model centralizes critical functions of an operational organization into discrete service units that are located near the operational location or that provide remote assistance with communication and reporting lines in place to function effectively. Top quartile operational performance and tool availability is a result of placing a remote repair and maintenance facility that includes containerized specialty modules near the operational area. The upfront bottomhole assembly engineering, 24/7 monitoring, and proactive feedback of logged data, drillstring dynamics, and wellbore hydraulics are performed by a core team of subject matter experts in their respective disciplines from an established centralized operating center. The operational KPIs over the course of the six well exploration campaign provided substantial evidence to support the reliability of the model and the high level of experience used in both the remote maintenance facility and the operations center support team.

Deep renovation up to zero energy through Add-ons: the ABRACADABRA Project

2019 ◽  
Author(s):  
Annarita Ferrante ◽  
Fabrizio Ungaro ◽  
Giovanni Semprini ◽  
Lorna Dragonetti ◽  
Elettra Agliardi ◽  
...  
Keyword(s):  
Cost Effective ◽  
Urban Environments ◽  
Zero Energy ◽  
Urban Context ◽  
Building Stock ◽  
Existing Building ◽  
The Real Estate ◽  
International Projects ◽  
Eu Project ◽  
The Eu

<p>and international projects</p><p>various EU H2020 projects</p><p>Though housing is one of the most energy consumer sectors, it is currently extremely underestimated, because of a clear investment gap due to economic, social and legislative barriers. The EU project ABRACADABRA (Assistant Building to Retrofit, Adopt, Cure And Develop the Actual Buildings up to zeRo energy, Activating a market for deep renovation) is based on the idea that the real estate value increase given by the appropriate densification strategy in urban environments could be an opportunity to activate a market for deep energy renovation. To prove the effectiveness of the strategy more than 70 case studies throughout the EU cities have been assessed by means of a cost-effective analysis. Basing on the parametric variation of the different values involved (cost of construction, energy, etc.) the benefit of this strategy has been proved in the majority of the different building types and contexts.</p><p>More interestingly, the ABRA strategy has been simulated and tested outside Europe in order to verify its scalability and the possibility of considering other non-energy related benefits in the renovation of the existing building stock. A specific study on the NYC urban context has been conducted to effectively adapt the strategy and combine the global drivers of energy consumption reduction and CO<span>2</span> emission reduction with the local need of combating flood emergency and related flood-proofing measures.</p><p>The results reached by this work demonstrate how the energy retrofit trough add-ons reduces significantly the payback times of the investments, preserve soil consumption, while providing a extraordinary opportunity to enhance urban resiliency by challenging the local emergencies.</p>

Experimental Study on Inactivation of Heterosigma akashiwo by Pulsed Electric Field and Engine Waste Heat Treatment

2013 ◽  
Vol 864-867 ◽  
pp. 1822-1825
Author(s):  
Jun Feng Zhou ◽  
Le Ping Xu ◽  
Zhong Cheng Wang ◽  
Ting Fei Xie ◽  
Kai Liang Yang
Keyword(s):  
Ballast Water ◽  
Pulse Width ◽  
Structural Integrity ◽  
Waste Heat ◽  
Cost Effective ◽  
Heterosigma Akashiwo ◽  
Aquatic Species ◽  
Electrode Gap ◽  
Preheating Temperature ◽  
Inactivation Effect

Ballast water (BW) is essential in maintaining the balance and structural integrity of ships during voyage. However, invasive aquatic species discharged through ballast water is one of the most serious problems posed nowadays in the marine environment. Experimental inactivation effect on Heterosigma akashiwo by combined PEF and engine waste heat pretreatment was studied. Effect factors such as pulsed voltage, electrode gap, pulse width and preheating temperature were explored, and its mechanism of inactivate the Heterosigma akashiwo was analyzed. It was prospected to be effective to inactive the mircoalgae of ships ballast water by combined PEF and engine waste heat so as to obtain a cost-effective BW treatment with minimized environmental impacts.

scholarly journals Fabric Vest Socket with Embroidered Electrodes for Control of Myoelectric Prosthesis

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1196 ◽  
Author(s):  
Seulah Lee ◽  
Babar Jamil ◽  
Sunhong Kim ◽  
Youngjin Choi
Keyword(s):  
Signal To Noise Ratio ◽  
Cost Effective ◽  
Electrode Impedance ◽  
Rigid Support ◽  
Daily Lives ◽  
Myoelectric Prosthesis ◽  
Myoelectric Prostheses ◽  
Average Classification Accuracy ◽  
High Level ◽  
Semg Signals

Myoelectric prostheses assist users to live their daily lives. However, the majority of users are primarily confined to forearm amputees because the surface electromyography (sEMG) that understands the motion intents should be acquired from a residual limb for control of the myoelectric prosthesis. This study proposes a novel fabric vest socket that includes embroidered electrodes suitable for a high-level upper amputee, especially for shoulder disarticulation. The fabric vest socket consists of rigid support and a fabric vest with embroidered electrodes. Several experiments were conducted to verify the practicality of the developed vest socket with embroidered electrodes. The sEMG signals were measured using commercial Ag/AgCl electrodes for a comparison to verify the performance of the embroidered electrodes in terms of signal amplitudes, the skin-electrode impedance, and signal-to-noise ratio (SNR). These results showed that the embroidered electrodes were as effective as the commercial electrodes. Then, posture classification was carried out by able-bodied subjects for the usability of the developed vest socket. The average classification accuracy for each subject reached 97.92%, and for all the subjects it was 93.2%. In other words, the fabric vest socket with the embroidered electrodes could measure sEMG signals with high accuracy. Therefore, it is expected that it can be readily worn by high-level amputees to control their myoelectric prostheses, as well as it is cost effective for fabrication as compared with the traditional socket.

scholarly journals INNOVATIVE STRATEGIES AS A PROSPECTIVE DIRECTION OF PLANNING ACTIVITIES OF HOTEL AND RESTAURANT ENTERPRISES OF UKRAINE

2021 ◽  
Author(s):  
Ljudmila Neshchadym ◽  
Svetlana Тymchuk
Keyword(s):  
Internal State ◽  
Cost Effective ◽  
Restaurant Industry ◽  
Product Portfolio ◽  
Innovative Strategies ◽  
Reducing Costs ◽  
Fierce Competition ◽  
High Level

The article monitors and analyzes the main strategies for the development of hotel and restaurant enterprises and, accordingly, increase their efficiency and competitiveness; the process of organization and economic planning of hotel and restaurant enterprises has been improved. It is investigated that the enterprises of hotel and restaurant industry of Ukraine partially provide the necessary quality indicators for the provided services, and this is the reason for the insufficient level of competitiveness of services in the domestic market and in European countries. An urgent problem of planning and organizing the activities of hotel and restaurant enterprises is the use of innovative strategies and areas of long-term development to increase the level of competitiveness and quality of services provided. This will intensify innovation processes in Ukraine in the field of services. Innovative strategies and promising areas of development of hotel and restaurant enterprises are extremely important in the management of hotel and restaurant complexes. Innovative strategies in the hotel and restaurant industry are cost-effective and feasible provided a high level of profitability, improving the service process, expanding the range of services, reducing costs, increasing competitiveness, improve and optimize the work of all hotel or restaurant services. The application of innovative strategies in the process of hotel and restaurant enterprises allows them to compete in the field of service. In conditions of fierce competition and rapidly changing market conditions, it is very important not only to focus on the internal state of affairs of the enterprise, but also to develop a long-term strategy. Economic activity requires constant innovation. All services offered by hotel and restaurant enterprises must be introduced in modern innovative ways. This is the basis for successful business, maintaining a consistently high level of competitiveness and improving the quality of service. The selection of the optimal innovation strategy for a hotel or restaurant company is carried out by its management based on the analysis of key factors that characterize its condition and the state of the product portfolio.

scholarly journals Using plants to remediate or manage metal-polluted soils: an overview on the current state of phytotechnologies

2021 ◽  
Vol 43 ◽  
pp. e58283
Author(s):  
Clístenes Williams Araújo do Nascimento ◽  
Caroline Miranda Biondi ◽  
Fernando Bruno Vieira da Silva ◽  
Luiz Henrique Vieira Lima
Keyword(s):  
Large Scale ◽  
State Of The Art ◽  
Cost Effective ◽  
Time Frame ◽  
Contaminated Site ◽  
Polluted Soils ◽  
Mining Sites ◽  
Current State ◽  
Remedial Actions ◽  
The Tropics

Soil contamination by metals threatens both the environment and human health and hence requires remedial actions. The conventional approach of removing polluted soils and replacing them with clean soils (excavation) is very costly for low-value sites and not feasible on a large scale. In this scenario, phytoremediation emerged as a promising cost-effective and environmentally-friendly technology to render metals less bioavailable (phytostabilization) or clean up metal-polluted soils (phytoextraction). Phytostabilization has demonstrable successes in mining sites and brownfields. On the other hand, phytoextraction still has few examples of successful applications. Either by using hyperaccumulating plants or high biomass plants induced to accumulate metals through chelator addition to the soil, major phytoextraction bottlenecks remain, mainly the extended time frame to remediation and lack of revenue from the land during the process. Due to these drawbacks, phytomanagement has been proposed to provide economic, environmental, and social benefits until the contaminated site returns to productive usage. Here, we review the evolution, promises, and limitations of these phytotechnologies. Despite the lack of commercial phytoextraction operations, there have been significant advances in understanding phytotechnologies' main constraints. Further investigation on new plant species, especially in the tropics, and soil amendments can potentially provide the basis to transform phytoextraction into an operational metal clean-up technology in the future. However, at the current state of the art, phytotechnology is moving the focus from remediation technologies to pollution attenuation and palliative cares.

Sign in / Sign up

Export Citation Format

Share Document