scholarly journals Consilience in the Peripheral Sensory Adaptation Response

2021 ◽  
Vol 15 ◽  
Author(s):  
Willy Wong
Keyword(s):  
Steady State ◽  
Animal Species ◽  
Geometric Mean ◽  
Fundamental Result ◽  
Sensory Adaptation ◽  
Extensive Review ◽  
Mathematical Relationship ◽  
Wide Range ◽  
Adaptation Response ◽  
Peripheral Sensory

Measurements of the peripheral sensory adaptation response were compared to a simple mathematical relationship involving the spontaneous, peak, and steady-state activities. This relationship is based on the geometric mean and is found to be obeyed to good approximation in peripheral sensory units showing a sustained response to prolonged stimulation. From an extensive review of past studies, the geometric mean relationship is shown to be independent of modality and is satisfied in a wide range of animal species. The consilience of evidence, from nearly 100 years of experiments beginning with the work of Edgar Adrian, suggests that this is a fundamental result of neurophysiology.

scholarly journals A Universal Law of Sensory Adaptation

2020 ◽  
Author(s):  
Willy Wong
Keyword(s):  
Steady State ◽  
Sensory Neurons ◽  
Geometric Mean ◽  
Peak Level ◽  
Constant Stimulus ◽  
Sensory Adaptation ◽  
Level Of Activity ◽  
Universal Relationship ◽  
Steady State Activity ◽  
Universal Law

AbstractSensory adaptation is the gradual decline in response as recorded from sensory neurons to a constant stimulus. Measuring adaptation involves counting the time-varying rate of action potentials generated by the sensory neuron. A typical adaptation curve will involve spontaneous activity prior to the introduction of the stimulus, a peak level of activity soon after the stimulus is presented, and a gradual fall to a new steady-state value. In this study, the steady-state activity is shown to be equal to the geometric mean of the spontaneous and peak activities. This remarkably simple equation holds across different sensory modalities and in different animal species. It is obeyed in both modern measurements of neural adaptation as well as the original recordings of Lord Adrian in his seminal work on the discovery of the all-or-nothing principle of nerves. It is likely a universal relationship governing the peripheral response of sensory neurons.

Registration of animal rabies in Krasnodar region

2020 ◽  
pp. 3-4
Author(s):  
Oleg Yu. Chernykh ◽  
◽  
Vadim A. Bobrov ◽  
Sergey N. Zabashta ◽  
Roman A. Krivonos ◽  
...  
Keyword(s):  
Urban Form ◽  
Animal Species ◽  
Farm Animals ◽  
Natural Focus ◽  
Dead End ◽  
Wide Range ◽  
Epizootic Process ◽  
Krasnodar Region ◽  
Spread Of Infection ◽  
Reporting Data

Rabies remains a constant threat to humanity in many parts of the world. At the same time, scientifically grounded antiepizootic measures should be based on the peculiarities of the regional epizootology of this zooanthroponosis. The authors studied the epizootological and statistical reporting data of the Kropotkin Regional Veterinary Laboratory, presented an analysis of the registration of rabies in animals in Krasnodar region. From the obtained data, it should be noted that despite the wide range of animals involved in the epizootic process of rabies infection in Krasnodar region, dogs, cats and foxes play a major role in the reservation and spread of infection, which account for 78.6. Of the total number of registered cases, 15.5% falls on foxes, that indicates the natural focus of the disease, along with the manifestation of the disease in an urban form. At the same time, stray and neglected dogs and cats, which occupy a significant place among the total number of sick animals, are also sources and spread of the infection. Thus farm animals (8.3% of the total number of infected animals) are a biological dead end for the infection. Isolated cases of the disease were noted in muskrat, donkey, raccoon, raccoon dog, marten, ferret and jackal. The authors also established the specific morbidity of various animal species with rabies infection, that is an important aspect in the development and implementation of antiepizootic measures complex

Spectroscopic Studies of Asparaginyl-tRNA Synthetase from Entamoeba histolytica

2019 ◽  
Vol 26 (6) ◽  
pp. 435-448
Author(s):  
Priyanka Biswas ◽  
Dillip K. Sahu ◽  
Kalyanasis Sahu ◽  
Rajat Banerjee
Keyword(s):  
Circular Dichroism ◽  
Steady State ◽  
Entamoeba Histolytica ◽  
Protein Concentration ◽  
Trna Synthetase ◽  
Solvent Exposure ◽  
Steady State Fluorescence ◽  
State Process ◽  
Wide Range ◽  
Circular Dichroïsm

Background: Aminoacyl-tRNA synthetases play an important role in catalyzing the first step in protein synthesis by attaching the appropriate amino acid to its cognate tRNA which then transported to the growing polypeptide chain. Asparaginyl-tRNA Synthetase (AsnRS) from Brugia malayi, Leishmania major, Thermus thermophilus, Trypanosoma brucei have been shown to play an important role in survival and pathogenesis. Entamoeba histolytica (Ehis) is an anaerobic eukaryotic pathogen that infects the large intestines of humans. It is a major cause of dysentery and has the potential to cause life-threatening abscesses in the liver and other organs making it the second leading cause of parasitic death after malaria. Ehis-AsnRS has not been studied in detail, except the crystal structure determined at 3 Å resolution showing that it is primarily α-helical and dimeric. It is a homodimer, with each 52 kDa monomer consisting of 451 amino acids. It has a relatively short N-terminal as compared to its human and yeast counterparts. Objective: Our study focusses to understand certain structural characteristics of Ehis-AsnRS using biophysical tools to decipher the thermodynamics of unfolding and its binding properties. Methods: Ehis-AsnRS was cloned and expressed in E. coli BL21DE3 cells. Protein purification was performed using Ni-NTA affinity chromatography, following which the protein was used for biophysical studies. Various techniques such as steady-state fluorescence, quenching, circular dichroism, differential scanning fluorimetry, isothermal calorimetry and fluorescence lifetime studies were employed for the conformational characterization of Ehis-AsnRS. Protein concentration for far-UV and near-UV circular dichroism experiments was 8 µM and 20 µM respectively, while 4 µM protein was used for the rest of the experiments. Results: The present study revealed that Ehis-AsnRS undergoes unfolding when subjected to increasing concentration of GdnHCl and the process is reversible. With increasing temperature, it retains its structural compactness up to 45ºC before it unfolds. Steady-state fluorescence, circular dichroism and hydrophobic dye binding experiments cumulatively suggest that Ehis-AsnRS undergoes a two-state transition during unfolding. Shifting of the transition mid-point with increasing protein concentration further illustrate that dissociation and unfolding processes are coupled indicating the absence of any detectable folded monomer. Conclusion: This article indicates that GdnHCl induced denaturation of Ehis-AsnRS is a two – state process and does not involve any intermediate; unfolding occurs directly from native dimer to unfolded monomer. The solvent exposure of the tryptophan residues is biphasic, indicating selective quenching. Ehis-AsnRS also exhibits a structural as well as functional stability over a wide range of pH.

scholarly journals Identification of DC Thermal Steady-State Differential Inductance of Ferrite Power Inductors

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3854
Author(s):  
Salvatore Musumeci ◽  
Luigi Solimene ◽  
Carlo Stefano Ragusa
Keyword(s):  
Steady State ◽  
Input Voltage ◽  
Switching Frequency ◽  
Ohmic Losses ◽  
Steady State Temperature ◽  
Wide Range ◽  
Average Current ◽  
Power Inductors ◽  
Saturable Inductor ◽  
Thermal Steady State

In this paper, we propose a method for the identification of the differential inductance of saturable ferrite inductors adopted in DC–DC converters, considering the influence of the operating temperature. The inductor temperature rise is caused mainly by its losses, neglecting the heating contribution by the other components forming the converter layout. When the ohmic losses caused by the average current represent the principal portion of the inductor power losses, the steady-state temperature of the component can be related to the average current value. Under this assumption, usual for saturable inductors in DC–DC converters, the presented experimental setup and characterization method allow identifying a DC thermal steady-state differential inductance profile of a ferrite inductor. The curve is obtained from experimental measurements of the inductor voltage and current waveforms, at different average current values, that lead the component to operate from the linear region of the magnetization curve up to the saturation. The obtained inductance profile can be adopted to simulate the current waveform of a saturable inductor in a DC–DC converter, providing accurate results under a wide range of switching frequency, input voltage, duty cycle, and output current values.

SET-VALUED PERFORMANCE APPROXIMATIONS FOR THE QUEUE GIVEN PARTIAL INFORMATION

2020 ◽  
pp. 1-23
Author(s):  
Yan Chen ◽  
Ward Whitt
Keyword(s):  
Steady State ◽  
Decay Rate ◽  
Waiting Time ◽  
Partial Information ◽  
Upper And Lower Bounds ◽  
Interarrival Time ◽  
Limited Information ◽  
Wide Range ◽  
The Mean ◽  
Third Moment

In order to understand queueing performance given only partial information about the model, we propose determining intervals of likely values of performance measures given that limited information. We illustrate this approach for the mean steady-state waiting time in the $GI/GI/K$ queue. We start by specifying the first two moments of the interarrival-time and service-time distributions, and then consider additional information about these underlying distributions, in particular, a third moment and a Laplace transform value. As a theoretical basis, we apply extremal models yielding tight upper and lower bounds on the asymptotic decay rate of the steady-state waiting-time tail probability. We illustrate by constructing the theoretically justified intervals of values for the decay rate and the associated heuristically determined interval of values for the mean waiting times. Without extra information, the extremal models involve two-point distributions, which yield a wide range for the mean. Adding constraints on the third moment and a transform value produces three-point extremal distributions, which significantly reduce the range, producing practical levels of accuracy.

scholarly journals Modelling the atmosphere of lava planet K2-141b: implications for low- and high-resolution spectroscopy

2020 ◽  
Vol 499 (4) ◽  
pp. 4605-4612
Author(s):  
T Giang Nguyen ◽  
Nicolas B Cowan ◽  
Agnibha Banerjee ◽  
John E Moores
Keyword(s):  
Steady State ◽  
Ocean Circulation ◽  
Scale Height ◽  
High Resolution Spectroscopy ◽  
Return Flow ◽  
High Dispersion ◽  
Magma Ocean ◽  
Steady State Flow ◽  
Wide Range ◽  
Very High

ABSTRACT Transit searches have uncovered Earth-size planets orbiting so close to their host star that their surface should be molten, so-called lava planets. We present idealized simulations of the atmosphere of lava planet K2-141b and calculate the return flow of material via circulation in the magma ocean. We then compare how pure Na, SiO, or SiO2 atmospheres would impact future observations. The more volatile Na atmosphere is thickest followed by SiO and SiO2, as expected. Despite its low vapour pressure, we find that a SiO2 atmosphere is easier to observe via transit spectroscopy due to its greater scale height near the day–night terminator and the planetary radial velocity and acceleration are very high, facilitating high dispersion spectroscopy. The special geometry that arises from very small orbits allows for a wide range of limb observations for K2-141b. After determining the magma ocean depth, we infer that the ocean circulation required for SiO steady-state flow is only 10−4 m s−1, while the equivalent return flow for Na is several orders of magnitude greater. This suggests that a steady-state Na atmosphere cannot be sustained and that the surface will evolve over time.

scholarly journals Foslevodopa/Foscarbidopa Is Well Tolerated and Maintains Stable Levodopa and Carbidopa Exposure Following Subcutaneous Infusion

2021 ◽  
pp. 1-8
Author(s):  
Matthew Rosebraugh ◽  
Wei Liu ◽  
Melina Neenan ◽  
Maurizio F. Facheris
Keyword(s):  
Steady State ◽  
Phase 1 ◽  
The United States ◽  
Therapeutic Window ◽  
Fixed Dose ◽  
Advanced Parkinson’S Disease ◽  
Subcutaneous Infusion ◽  
Study Results ◽  
Wide Range ◽  
Favorable Safety

Background: Foslevodopa/foscarbidopa, formerly known as ABBV-951, is a formulation of levodopa/carbidopa prodrugs with solubility that allows for subcutaneous (SC) infusion and is in development for the treatment of motor complications for patients with advanced Parkinson’s disease (aPD). Objective: The current work characterizes the levodopa (LD) and carbidopa (CD) pharmacokinetics (PK) following SC infusions of foslevodopa/foscarbidopa delivered at four different infusion rates in PD patients. Methods: This was a Phase 1, single ascending dose, single-blind study conducted in 28 adult male and female subjects at seven sites in the United States. Foslevodopa/foscarbidopa was administered via abdominal SC infusion in PD patients over 72 hours. Patients were stratified in 4 groups and received a fixed dose of foslevodopa/foscarbidopa based on their oral daily LD intake. Serial plasma PK samples were collected to assay for LD and CD concentrations. Safety and tolerability were assessed throughout the study. Results: LD exposure quickly reached steady state and remained stable with minimal fluctuations. Foslevodopa/foscarbidopa infusion provides stable LD and CD exposures compared to oral LD/CD dosing with the average steady-state exposure ranging from 747-4660 ng/mL for the different groups. Conclusion: Foslevodopa/foscarbidopa was able to provide stable LD and CD exposures in PD patients over 72 hours via SC route of delivery with very low fluctuation in LD concentration level across a wide range of clinically relevant exposures. Foslevodopa/foscarbidopa had a favorable safety profile. The low PK fluctuation following foslevodopa/foscarbidopa infusion is expected to maintain LD exposure to treat aPD patients within a narrow therapeutic window.

Study of Temperature Effect on Servovalve-Controlled Fuel Metering Unit

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Bin Wang ◽  
Haocen Zhao ◽  
Ling Yu ◽  
Zhifeng Ye
Keyword(s):  
Steady State ◽  
Temperature Variation ◽  
Dynamic Characteristics ◽  
Numerical Study ◽  
Step Response ◽  
Fuel Temperature ◽  
Wide Range ◽  
Fuel Rate ◽  
Testing Condition ◽  
The Given

It is usual that fuel system of an aero-engine operates within a wide range of temperatures. As a result, this can have effect on both the characteristics and precision of fuel metering unit (FMU), even on the performance and safety of the whole engine. This paper provides theoretical analysis of the effect that fluctuation of fuel temperature has on the controllability of FMU and clarifies the drawbacks of the pure mathematical models considering fuel temperature variation for FMU. Taking the electrohydraulic servovalve-controlled FMU as the numerical study, simulation in AMESim is carried out by thermal hydraulic model under the temperatures ranged from −10 to 60 °C to confirm the effectiveness and precision of the model on the basis of steady-state and dynamic characteristics of FMU. Meanwhile, the FMU testing workbench with temperature adjustment device employing the fuel cooler and heater is established to conduct an experiment of the fuel temperature characteristics. Results show that the experiment matches well with the simulation with a relative error no more than 5% and that 0–50 °C fuel temperature variation produces up to 5.2% decrease in fuel rate. In addition, step response increases with the fuel temperature. Fuel temperature has no virtual impact on the steady-state and dynamic characteristics of FMU under the testing condition in this paper, implying that FMU can operate normally in the given temperature range.

scholarly journals Acceptance threshold theory can explain occurrence of homosexual behaviour

2015 ◽  
Vol 11 (1) ◽  
pp. 20140603 ◽  
Author(s):  
Katharina C. Engel ◽  
Lisa Männer ◽  
Manfred Ayasse ◽  
Sandra Steiger
Keyword(s):  
Animal Species ◽  
Reproductive Potential ◽  
Search Time ◽  
Same Sex ◽  
Burying Beetles ◽  
Acceptance Threshold ◽  
Threshold Theory ◽  
Wide Range ◽  
Low Levels ◽  
Perceived Costs

Same-sex sexual behaviour (SSB) has been documented in a wide range of animals, but its evolutionary causes are not well understood. Here, we investigated SSB in the light of Reeve's acceptance threshold theory. When recognition is not error-proof, the acceptance threshold used by males to recognize potential mating partners should be flexibly adjusted to maximize the fitness pay-off between the costs of erroneously accepting males and the benefits of accepting females. By manipulating male burying beetles' search time for females and their reproductive potential, we influenced their perceived costs of making an acceptance or rejection error. As predicted, when the costs of rejecting females increased, males exhibited more permissive discrimination decisions and showed high levels of SSB; when the costs of accepting males increased, males were more restrictive and showed low levels of SSB. Our results support the idea that in animal species, in which the recognition cues of females and males overlap to a certain degree, SSB is a consequence of an adaptive discrimination strategy to avoid the costs of making rejection errors.

Analytical evaluation of track response in the vertical direction due to a moving load

2016 ◽  
Vol 23 (18) ◽  
pp. 2989-3006 ◽  
Author(s):  
Wlodzimierz Czyczula ◽  
Piotr Koziol ◽  
Dariusz Kudla ◽  
Sergiusz Lisowski
Keyword(s):  
Steady State ◽  
Moving Load ◽  
Vertical Direction ◽  
Vertical Displacement ◽  
Steady State Response ◽  
Concentrated Force ◽  
State Response ◽  
Weakly Coupled ◽  
Wide Range ◽  
Rail Deflection

In the literature, typical analytical track response models are composed of beams (which represent the rail) on viscoelastic or elastic foundations. The load is usually considered as a single concentrated force (constant or varying in time) moving with constant speed. Concentrated or distributed loads or multilayer track models have rarely been considered. One can find some interesting results concerning analysis of distributed loads and multilayer track structures that include both analytical and numerical approaches. However, there is a noticeable lack of sufficient comparison between track responses under concentrated or distributed load and between one and multilayer track models. One of the unique features of the present paper is a comparison of data obtained for a series of concentrated and distributed loads, which takes into account a wide range of track parameters and train speeds. One of the fundamental questions associated with the multilayer track model is the level of coupling between the rail and the vibrations of the sleepers. In this paper, it is proved that sleepers are weakly coupled with the rail if the track is without significant imperfections, and the steady-state response is analyzed for this case. In other words, sleeper vibrations do not influence the rail vibrations significantly. Therefore the track is analyzed by means of a two-stage model. The first step of this model determines rail vibration under a moving load, and then the sleeper vibration is calculated from previously obtained kinematic excitation. The model is verified by comparison of the obtained results with experimental data. Techniques based on Fourier series are applied to the solution of the steady-state track response. Another important problem associated with track response under moving loads arises from the analysis of the effect of longitudinal forces in rails on vertical displacement. It is shown that, in the case of the steady-state response, longitudinal forces do not influence rail displacements significantly and this observation remains correct for a wide range of track parameters and train speeds. The paper also analyzes the legitimacy of the statement that additional rail deflection between sleepers, compared to the continuous rail support, can be considered as a track imperfection.

Sign in / Sign up

Export Citation Format

Share Document