scholarly journals A Review of Current Research in Subscale Flight Testing and Analysis of Its Main Practical Challenges

Aerospace ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 74
Author(s):  
Alejandro Sobron ◽  
David Lundström ◽  
Petter Krus

Testing of untethered subscale models, often referred to as subscale flight testing, has traditionally had a relatively minor, yet relevant use in aeronautical research and development. As recent advances in electronics, rapid prototyping and unmanned-vehicle technologies expand its capabilities and lower its cost, this experimental method is seeing growing interest across academia and the industry. However, subscale models cannot meet all similarity conditions required for simulating full-scale flight. This leads to a variety of approaches to scaling and to other alternative applications. Through a literature review and analysis of different scaling strategies, this study presents an overall picture of how subscale flight testing has been used in recent years and synthesises its main issues and practical limitations. Results show that, while the estimation of full-scale characteristics is still an interesting application within certain flight conditions, subscale models are progressively taking a broader role as low-cost technology-testing platforms with relaxed similarity constraints. Different approaches to tackle the identified practical challenges, implemented both by the authors and by other organisations, are discussed and evaluated through flight experiments.

2013 ◽  
Vol 20 (3) ◽  
pp. 91-106 ◽  
Author(s):  
Rachel Pizarek ◽  
Valeriy Shafiro ◽  
Patricia McCarthy

Computerized auditory training (CAT) is a convenient, low-cost approach to improving communication of individuals with hearing loss or other communicative disorders. A number of CAT programs are being marketed to patients and audiologists. The present literature review is an examination of evidence for the effectiveness of CAT in improving speech perception in adults with hearing impairments. Six current CAT programs, used in 9 published studies, were reviewed. In all 9 studies, some benefit of CAT for speech perception was demonstrated. Although these results are encouraging, the overall quality of available evidence remains low, and many programs currently on the market have not yet been evaluated. Thus, caution is needed when selecting CAT programs for specific patients. It is hoped that future researchers will (a) examine a greater number of CAT programs using more rigorous experimental designs, (b) determine which program features and training regimens are most effective, and (c) indicate which patients may benefit from CAT the most.


Author(s):  
J.R. Caradus ◽  
D.A. Clark

The New Zealand dairy industry recognises that to remain competitive it must continue to invest in research and development. Outcomes from research have ensured year-round provision of low-cost feed from pasture while improving productivity. Some of these advances, discussed in this paper, include the use of white clover in pasture, understanding the impacts of grass endophyte, improved dairy cow nutrition, the use of alternative forage species and nitrogen fertiliser to improve productivity, demonstration of the impact of days-in-milk on profitability, and the use of feed budgeting and appropriate pasture management. Keywords: dairy, profitability, research and development


2017 ◽  
Vol 68 (3) ◽  
pp. 453-458 ◽  
Author(s):  
Daniel Besnea ◽  
Alina Spanu ◽  
Iuliana Marlena Prodea ◽  
Gheorghita Tomescu ◽  
Iolanda Constanta Panait

The paper points out the advantages of rapid prototyping for improving the performances/constructive optimization of mixing devices used in process industries, here exemplified to propeller types ones. The multidisciplinary optimization of the propeller profile affords its design using parametric CAD methods. Starting from the mathematical curve equations proposed for the blade profile, it was determined its three-dimensional virtual model. The challenge has been focused on the variation of propeller pitch and external diameter. Three dimensional ranges were manufactured using the additive manufacturing process with Marker Boot 3D printer. The mixing performances were tested on the mixing equipment measuring the minimum rotational speed and the correspondent shaft torque for complete suspension achieved for each of the three models. The virtual and rapid prototyping method is newly proposed by the authors to obtain the basic data for scale up of the mixing systems, in the case of flexible production (of low quantities), in which both the nature and concentration of the constituents in the final product varies often. It is an efficient and low cost method for the rapid identification of the optimal mixing device configuration, which contributes to the costs reduction and to the growing of the output.


Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2798
Author(s):  
Konstanty M. Gawrylczyk ◽  
Szymon Banaszak

The paper provides a review of the modelling techniques used to simulate the frequency response of transformer windings. The aim of the research and development of modelling methods was to analyze the influence of deformations and faults in the windings on the changes in the frequency response. All described methods are given with examples of the modelling results performed by the authors of this paper and from literature sources. The research is prefaced with a thorough literature review. There are described models based on lumped parameters with input data coming from direct calculations based on the winding geometry and obtained from FEM modelling software and models considering the wave phenomena in the windings. The analysis was also performed for practical problems in winding modelling: the influence of windings other than the modelled one and the influence of parallel wires in a winding.


2015 ◽  
Vol 63 (1) ◽  
pp. 305-314 ◽  
Author(s):  
S. Skoczypiec

Abstract One of the research and development trends in nowadays manufacturing technology is integration of different manufacturing techniques into single machine tool. In the first part of the paper possibilities, goals, reasons and advantages of thermal and electrochemical interaction have been characterized. As literature review indicates such a connection can be realized as sequential or hybrid machining. The second part of the paper focuses on detailed analysis of laser assisted electrochemical process. For this purpose, the mathematical model of workpiece heating has been developed. Based on obtained results and literature review possibilities of technical realization and potential application have been discussed.


Author(s):  
Yucel Orkut Aktas ◽  
Ugur Ozdemir ◽  
Yasin Dereli ◽  
Ahmed Farabi Tarhan ◽  
Aykut Cetin ◽  
...  

Kybernetes ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mi Tang ◽  
Hongmei Zhou ◽  
Qingyan Yan ◽  
Ruoyu Li ◽  
Hui Lu

PurposeHealthcare employs informatics to offer its services through information technology where the social network can aid virtual medical learning. Since the usage of the internet and other electronic tools for medical services delivery is at the initial stage, it is essential to examine the factors that condition patients and medical elements in a virtual environment can develop relationship models on the health services. So, the authors have systematically reviewed virtual medical learning and offered some suggestions for the upcoming works. The authors have also discovered gaps in the state-of-the-art papers and provided solutions for them.Design/methodology/approachNumerous novel advancements have changed the old exercise of therapeutic and analytic learning. Virtual spaces have quickly turned into a section of the learning technology vision. Given the importance of its achievements and endless low-cost expansion of the educational system, virtual education has been considered as one of the issues raised by the information communities. Medicine and health are some of the most important fields in virtual technologies. Hence, in this paper, we have used a systematic literature review to deeply examine virtual medical learning. After establishing exclusion and inclusion criteria, an independent systematic search in Google Scholar, ACM, Scopus, Eric, Science Direct, Springer link, Emerald, Global ProQuest and IEEE for relevant studies have been performed, and 21 papers have been analyzed. Detailed data have been mined out of the papers.FindingsThe authors have found that virtual medical learning improves and expands the knowledge core and meaningfully affects the exercise. Virtual learning (VL) has been used in many therapeutic zones, like therapeutic learning, surgery, diagnosing, combining and regularizing processes. It has presented a fundamental access point and a referral mechanism for all of a course's component communities. It can also simplify communicative education, allowing learners to get abilities before applying them in a real-world situation. Also, the communicative characteristics of different VL programs can somehow be like direct teaching.Research limitations/implicationsSome excellent work may be removed owing to applying the filters to select the primary papers. Surveying all the documents on the topic of virtual medical learning is impossible, too. Nevertheless, the authors have tried to present a perfect survey of virtual medical learning. The results will be helpful for scholars to propose better virtual medical learning techniques.Practical implicationsE-learning has become an indispensable additional learning tool in medical education. The introduction of new learning technologies, the exponential growth of Internet usage and the advent of the World Wide Web can change the face of higher education. The results will be helpful for scholars for the upcoming works. The application of a literature review of partial least squares theory was useful for offering comprehensive literary coverage and completing the knowledge development analysis. The authors have backed scholars and experts for better understanding the development of virtual medical learning systems via presenting comparative data and scrutinizing the present advances.Originality/valueThe paper enhances intellectual knowledge by improving the conception of virtual medical learning. It informs the development, use of virtual medical learning and the upcoming works. The lack of comprehensive papers in this field has increased the importance of this paper. The present paper can handle the pace of publications.


Cataract is a degenerative condition that, according to estimations, will rise globally. Even though there are various proposals about its diagnosis, there are remaining problems to be solved. This paper aims to identify the current situation of the recent investigations on cataract diagnosis using a framework to conduct the literature review with the intention of answering the following research questions: RQ1) Which are the existing methods for cataract diagnosis? RQ2) Which are the features considered for the diagnosis of cataracts? RQ3) Which is the existing classification when diagnosing cataracts? RQ4) And Which obstacles arise when diagnosing cataracts? Additionally, a cross-analysis of the results was made. The results showed that new research is required in: (1) the classification of “congenital cataract” and, (2) portable solutions, which are necessary to make cataract diagnoses easily and at a low cost.


Sign in / Sign up

Export Citation Format

Share Document