scholarly journals Physical and Mathematical Modeling of the Interaction of Water Droplets and High-Speed Gas Flow

2021 ◽  
Vol 11 (23) ◽  
pp. 11146
Author(s):  
Aleksandr Minko ◽  
Oleg Guskov ◽  
Konstantin Arefyev ◽  
Andrey Saveliev
Keyword(s):  
Mathematical Modeling ◽  
High Speed ◽  
Gas Flow ◽  
Reynolds Numbers ◽  
Droplet Breakup ◽  
Flow Conditions ◽  
Two Phase ◽  
Gas Dynamic ◽  
Physical And Mathematical Modeling ◽  
Mach Numbers

Present work is devoted to physical and mathematical modeling of the secondary disintegration of a liquid jet and gas-dynamic breakup of droplets in high-speed air flows. In this work the analysis of the experiments of water droplet breakup in the supersonic flow with Mach numbers up to M = 3 was carried out. The influence of shock wave presence in the flow on the intensity of droplets gas-dynamic breakup is shown. A developed empirical model is presented. It allows to predict the distribution of droplet diameters and velocities depending on the gas flow conditions, as well as the physical properties of the liquid. The effect of the Weber and Reynolds numbers on the rate of droplets gas-dynamic breakup at various Mach numbers is shown. The obtained data can be useful in the development of mathematical models for the numerical simulation of two-phase flows in the combined Lagrange-Euler formulation.

Numerical Simulation and Analysis of Effect of Injection Volume on Biomass Particle Cyclone Venturi Dryer

2021 ◽  
Author(s):  
Guohai Jia ◽  
Guoshuai Tian ◽  
Zicheng Gao ◽  
Dan Huang ◽  
Wei Li ◽  
...  
Keyword(s):  
High Speed ◽  
Optimization Design ◽  
Gas Flow ◽  
Continuous Phase ◽  
Temperature Fields ◽  
Maximum Pressure ◽  
Two Phase ◽  
Velocity Change ◽  
Injection Volume ◽  
Wood Debris

Abstract Cyclone venturi dryer is suitable for drying materials with large particle size and wide distribution. The working process of cyclone venturi dryer is a very complicated three-dimensional and turbulent motion, so it is difficult to be studied theoretically and experimentally. In order to study the internal flow characteristics of the biomass particle cyclone venturi dryer, the computational fluid dynamics (CFD) software was used to simulate the gas-solid two-phase flow field inside the cyclone venturi dryer. The continuous phase adopts the Realizable k-ε turbulence model and the particle phase is discrete. The effects of different injection volume on the pressure, velocity, and temperature fields inside a cyclone venturi dryer were analyzed. The results showed that the maximum pressure drop and velocity change inside the dryer were at the venturi pipe. The wet material of the cyclone venturi dryer was inhaled into the venturi contraction tube by the negative pressure formed after the highspeed airflow was ejected, thus the mixture was completed in the venturi throat. The wood debris material was mixed with the high-speed hot gas flow in the venturi throat and then sprayed into the diffusion pipe. In the diffusion pipe of venturi, the heat and mass transfer process of wet wood debris and heat flow in venturi diffusion tube was completed. It is in good agreement with the simulation results. This study can provide a reference for the optimization design of the related cyclone venturi dryer structure.

Condensation of Steam on Finned Surfaces With Addition of a Surfactant

2005 ◽  
Author(s):  
Andrew T. Morrison ◽  
S. M. You
Keyword(s):  
Heat Transfer ◽  
Surface Energy ◽  
Reynolds Numbers ◽  
Film Condensation ◽  
Vapor Flow ◽  
Flow Conditions ◽  
Two Phase ◽  
Enhancement Of Heat Transfer ◽  
Flat Surfaces ◽  
Extended Surfaces

A fundamental knowledge of the parameters affecting film condensation is essential for the design of two phase heat exchangers. The current study examines the effect of extended surfaces and surface energy modifications and their interaction for condensation of steam in quiescent and vapor flow conditions. The enhancement of heat transfer for vertical, flat surfaces and two finned surfaces were compared for Reynolds numbers ranging from approximately 10 to 50. The addition of a nonionic surfactant, alcohol alkoxylate, to the system was evaluated for the same surfaces and vapor field conditions. Vapor flow of 0.25 m/s enhanced the heat transfer approximately 40%, while 0.5 m/s vapor velocity produced almost 100% increase in heat transfer. The addition of surfactant to the system produced small enhancement in heat transfer except in the case of condensate hold-up between the fins. In this case, the addition of surfactant increase the heat transfer an additional 25%, likely because the vapor flow and change of surface energy were sufficient to largely eliminate the hold-up of condensate between the fins.

An Experimental Study on the Gas Entrainment in Horizontally and Vertically Installed Centrifugal Pumps

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Martin Neumann ◽  
Thomas Schäfer ◽  
André Bieberle ◽  
Uwe Hampel
Keyword(s):  
Centrifugal Pump ◽  
Gas Flow ◽  
Gamma Ray ◽  
Minor Effect ◽  
Centrifugal Pumps ◽  
Flow Conditions ◽  
Two Phase ◽  
Inlet Flow ◽  
Pump Performance ◽  
Gas Entrainment

In this work, we have studied how gas accumulates in an industrial centrifugal pump under various steady-state two-phase flow conditions. Thereby, we considered both horizontal and vertical pump installation positions. Phase fractions within the impeller region of the pump have been quantitatively disclosed using high-resolution gamma-ray computed tomography (HireCT) and applying time-averaged rotation-synchronized CT scanning technique. The study was made for inlet volumetric gas flow rates between 0% and 5%. To account for different inlet flow conditions, which are assumed to occur during unwanted gas entrainment by hollow vortices, we produced disperse and swirling gas–liquid inlet flows. In this way, the influence of inlet flow boundary conditions on the pump performance as well as gas fraction distributions and gas holdup within the impeller wheel region could be successfully analyzed and compared with respect to the impeller alignment. It was shown that the installation position offers only a minor effect on the pump performance in comparison to the inlet flow conditions. In addition, for the first time, thin gas films at the pressure side of the impeller wheel blades could be visualized in an industrial centrifugal pump.

Mathematical Modeling of Impingement of an Air Jet in a Liquid Bath

2010 ◽  
Vol 1276 ◽  
Author(s):  
J. Solórzano-López ◽  
R. Zenit ◽  
M. A. Ramírez-Argáez
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Free Surface ◽  
Gas Flow ◽  
Two Phase ◽  
Arc Furnaces ◽  
Air Jet ◽  
Image Velocimetry ◽  
Oxygen Gas ◽  
The Mathematical Model

AbstractPhysical and mathematical modeling of jet-bath interactions in electric arc furnaces represent valuable tools to obtain a better fundamental understanding of oxygen gas injection into the furnace. In this work, a 3D mathematical model is developed based on the two phase approach called Volume of Fluid (VOF), which is able to predict free surface deformations and it is coded in the commercial fluid dynamics software FLUENTTM. Validation of the mathematical model is achieved by measurements on a transparent water physical model. Measurements of free surface depressions through a high velocity camera and velocity patterns are recorded through a Particle Image Velocimetry (PIV) Technique. Flow patterns and depression geometry are identified and characterized as function of process parameters like distance from nozzle to bath, gas flow rate and impingement angle of the gas jet into the bath. A reasonable agreement is found between simulated and experimental results.

Two-Phase Wakes in Adiabatic Liquid-Gas Flow Around a Cylinder

2020 ◽  
Author(s):  
Dohwan Kim ◽  
Matthew J. Rau
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
High Speed ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Water Channel ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Around A Cylinder ◽  
High Heat Transfer

Abstract Small tubes and fins have long been used as methods to increase surface area for convective heat transfer in single-phase flow applications. As demands for high heat transfer effectiveness has increased, implementing evaporative phase-change heat transfer in conjunction with small fins, tubes, and surface structures in advanced heat exchanger and heat sink designs has become increasingly attractive. The complex two-phase flow that results from these configurations is poorly understood, particularly in how the gas phase interacts with the flow structure of the wake created by these bluff bodies. An experimental study of liquid-gas bubbly flow around a cylinder was performed to understand these complex flow physics. A 9.5 mm diameter cylinder was installed horizontally within a vertical water channel facility. A high-speed camera captured the movement of the liquid-gas mixture around the cylinder for a range of bubble sizes. Liquid Reynolds number, calculated based on the cylinder diameter, was varied approximately from 100 to 3000. Time-averaged probability of bubble presence was calculated to characterize the cylinder wake and its effects on the bubble motion. The influence of the liquid Reynolds number, superficial air velocity, and bubble size is discussed in the context of the observed two-phase flow patterns.

An Experimental Analysis of the Structural Response of Flexible Lightweight Hydrofoils in Cavitating Flow

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Alexandra Lelong ◽  
Pierre Guiffant ◽  
Jacques André Astolfi
Keyword(s):  
High Speed ◽  
Structural Response ◽  
Reynolds Numbers ◽  
Cavitating Flow ◽  
Static Deformation ◽  
Flow Conditions ◽  
Bending Mode ◽  
Measurement Laser ◽  
Lock In ◽  
Specific Distance

This paper presents an original experimental study concerning the structural response of a flexible lightweight hydrofoil undergoing various flow conditions including partial cavitating flow. It is based on the analysis of the static deformation, the vibrations, the strains, and the stresses of a polyacetal NACA0015 cantilevered hydrofoil in a hydrodynamic tunnel, at Reynolds numbers ranging from 3 × 105 to 6 × 105. A specific distance measurement laser device was developed to measure the static deformation of the hydrofoil. The vibration response was measured by means of two laser vibrometers in order to identify the structural modal response. The strains and stresses were obtained from integrated strain gauges embedded in the foil close to the root section. A high-speed camera was used in order to analyze unsteady features of the cavitating flow. This paper presents the experimental setup and several results in both noncavitating and cavitating flow that should be very useful for numerical developments of fluid structure interaction (FSI) in heavy fluid. Several observations are reported in the paper showing the strong coupling between the fluid and the structure. Particularly, a frequency lock-in of the cavity frequency to the first bending mode is clearly observed for a narrow band of cavitation numbers.

scholarly journals Dynamics of dry spots in the liquid film moved by the gas flow in the mini-channel under intensive local heating

2018 ◽  
Vol 194 ◽  
pp. 01059
Author(s):  
Egor Tkachenko
Keyword(s):  
Heat Transfer ◽  
High Speed ◽  
Gas Flow ◽  
Local Heating ◽  
Experimental Studies ◽  
Heater Surface ◽  
Two Phase ◽  
Heat Transfer Crisis ◽  
Typical Size ◽  
Dry Spot

Experimental studies of hydrodynamics and the heat transfer crisis were carried out for a two-phase stratified flow in a mini-channel with intensive heating from a heat source of 1x1 cm2. It has been established that as the heat flow increases, the total area of dry spots on the heater increases, but when a certain temperature of the heater surface reaches ≈100 °C, the area of dry spots begins to decrease. With the help of high-speed visualization (shooting speed 100000 frames per second), several stages of formation of a dry spot (a typical size of the order of 100 microns) were isolated. It was found that at a heat flux of 450 W/cm2 about 1 million dry spots per 1 second are formed and washed on the surface of the heater (1 cm2). The speed of the contact line when dry spot is forming reaches 10 m/s.

Modeling Oscillatory Behavior of ESP Wells Under Two-Phase Flow Conditions

2012 ◽  
Author(s):  
Rinaldo Antonio de Melo Vieira ◽  
Mauricio Gargaglione Prado
Keyword(s):  
Flow Rate ◽  
Liquid Flow ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Liquid Flow Rate ◽  
Oscillatory Behavior ◽  
Phase Flow ◽  
Flow Conditions ◽  
Two Phase ◽  
Operational Conditions

The effect of free gas on the Electrical Submersible Pump (ESP) performance is well known. At a constant rotational speed and constant liquid flowrate, small amount of gas causes a mild head reduction when compared to the single phase liquid head. However, at higher gas rates, a drastic reduction in the head is observed. This critical condition, known as surging point, is a combination of liquid and gas flow rates that cause a maximum in the head performance curve. The first derivative of the head with respect to the liquid flow rate change sign as the liquid flow rate crosses the surging point. In several works on ESP two-phase flow performance, production conditions to the left of the surging region are described or reported as unstable operational conditions. This paper reviews basic concepts on stability of dynamical systems and shows through simulation that ESP oscillatory behavior may result from two-phase flow conditions. A specific drift flux computation code was developed to simulate the dynamic behavior of ESP wells producing without packer.

Inhomogeneous Multifluid Model for Prediction of Nonequilibrium Phase Transition and Droplet Dynamics

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
A. G. Gerber
Keyword(s):  
Phase Transition ◽  
High Speed ◽  
Gas Flow ◽  
Energy State ◽  
Momentum Conservation ◽  
Two Phase ◽  
Algebraic Form ◽  
Droplet Dynamics ◽  
Thermal Fields ◽  
Volume Method

A pressure based Eulerian multifluid model for application to phase transition with droplet dynamics in transonic high-speed flows is described. It is implemented using an element-based finite-volume method, which is implicit in time and solves mass and momentum conservation across all phases via a coupled algebraic multigrid approach. The model emphasizes treatment of the condensed phases, with their respective velocity and thermal fields, in inertial nonequilibrium and metastable gas flow conditions. The droplet energy state is treated either in algebraic form or through transport equations depending on appropriate physical assumptions. Due to the complexity of the two-phase phenomena, the model is presented and validated by exploring phase transition and droplet dynamics in a turbine cascade geometry. The influence of droplet inertia on localized homogeneous nucleation is examined.

Sign in / Sign up

Export Citation Format

Share Document