scholarly journals Relationships between Racket Arm Joint Moments and Racket Head Speed during the Badminton Jump Smash Performed by Elite Male Malaysian Players

2022 ◽  
Vol 12 (2) ◽  
pp. 880
Author(s):  
Yuvaraj Ramasamy ◽  
Viswanath Sundar ◽  
Juliana Usman ◽  
Rizal Razman ◽  
Harley Towler ◽  
...  
Keyword(s):  
Internal Rotation ◽  
Inverse Dynamics ◽  
Three Dimensional ◽  
Multiple Hypothesis Testing ◽  
Joint Moments ◽  
Wrist Extension ◽  
System A ◽  
Position Data ◽  
Rotation Plane ◽  
Inverse Dynamics Analysis

Three-dimensional position data of nineteen elite male Malaysian badminton players performing a series of maximal jump smashes were collected using a motion capture system. A ‘resultant moments’ inverse dynamics analysis was performed on the racket arm joints (shoulder, elbow and wrist). Relationships between racket head speed and peak joint moments were quantified using correlational analyses, inclusive of a Benjamini–Hochberg correction for multiple-hypothesis testing. The racket head centre speed at racket–shuttlecock contact was, on average, 61.2 m/s with a peak of 68.5 m/s which equated to average shuttlecock speeds of 95.2 m/s with a peak of 105.0 m/s. The correlational analysis revealed that a larger shoulder internal rotation moment (r = 0.737), backwards shoulder plane of elevation moment (r = 0.614) and wrist extension moment (r = −0.564) were associated with greater racket head centre speed at racket–shuttlecock contact. Coaches should consider strengthening the musculature associated with shoulder internal rotation, plane of elevation and wrist extension. This work provides a unique analysis of the joint moments of the racket arm during the badminton jump smash performed by an elite population and highlights significant relationships between racket head speed and peak resultant joint moments.

COMPARING METHODS FOR 3D INVERSE DYNAMICS ANALYSIS OF SQUAT LIFTING USING A FULL BODY LINKED SEGMENT MODEL

2020 ◽  
Vol 20 (03) ◽  
pp. 2050004
Author(s):  
IMAN VAHDAT ◽  
MOHAMAD PARNIANPOUR ◽  
FARHAD TABATABAI GHOMSHEH ◽  
NIMA TOOSIZADEH ◽  
ALI TANBAKOOSAZ
Keyword(s):  
Inverse Dynamics ◽  
Three Dimensional ◽  
Dynamics Analysis ◽  
Joint Moments ◽  
Bottom Up ◽  
Mean Values ◽  
Segment Model ◽  
Squat Lifting ◽  
Inverse Dynamics Analysis ◽  
Full Body

Objective: The main objective of this study was to assess the accuracy of bottom-up solution for three-dimensional (3D) inverse dynamics analysis of squat lifting using a 3D full body linked segment model. Least squares solution was used in this study as reference for assessment of the accuracy of bottom-up solution. Findings of this study may clarify how much the bottom-up solution can be reliable for calculating the joint kinetics in 3D inverse dynamics problems. Methods: Ten healthy males volunteered to perform squat lifting of a box with a load of one-tenth of their body weights. The joint moments were calculated using 110 reflective passive markers (46 anatomical markers and 64 tracking markers) and a 3D full body linked segment model. Ground reaction forces and kinematics data were recorded using a Vicon system with two parallel Kistler force plates. Three-dimensional Newton–Euler equations of motion with bottom-up and least squares solutions were applied to calculate joint moments. The peak and mean values of the joint moments were determined to check the quantitative differences as well as the time-to-peak value of the moment curves was determined to check the temporal differences between the two inverse dynamics solutions. Results: Significant differences (all [Formula: see text]-values [Formula: see text]) between the two inverse dynamics solutions were detected for the peak values of the hip (right and left sides) and L5–S1 joint moments in the lateral anatomical direction as well significant differences (all [Formula: see text]-values [Formula: see text]) were detected for the peak and mean values of the L5–S1 joint moment in all anatomical directions. Moreover, small differences (all RMSEs [Formula: see text]%) were detected between the two inverse dynamic solutions for the calculated lower body joint moments. Conclusions: The findings of this study clarified the disadvantages of the straightforward solutions and demonstrated that the bottom-up solution may not be accurate for more distal measures from the force plate (for hip and S1–L5) but it may be accurate for more proximal joints (ankle and knee) in 3D inverse dynamics analysis.

COMPARING METHODS FOR 3D INVERSE DYNAMICS ANALYSIS OF SQUAT LIFTING USING A FULL BODY LINKED SEGMENT MODEL

2020 ◽  
pp. 2031001
Author(s):  
IMAN VAHDAT ◽  
MOHAMAD PARNIANPOUR ◽  
FARHAD TABATABAI GHOMSHEH ◽  
NIMA TOOSIZADEH ◽  
ALI TANBAKOOSAZ
Keyword(s):  
Inverse Dynamics ◽  
Three Dimensional ◽  
Dynamics Analysis ◽  
Joint Moments ◽  
Bottom Up ◽  
Mean Values ◽  
Segment Model ◽  
Squat Lifting ◽  
Inverse Dynamics Analysis ◽  
Full Body

Objective: The main objective of this study was to assess the accuracy of bottom-up solution for three-dimensional (3D) inverse dynamics analysis of squat lifting using a 3D full body linked segment model. Least squares solution was used in this study as reference for assessment of the accuracy of bottom-up solution. Findings of this study may clarify how much the bottom-up solution can be reliable for calculating the joint kinetics in 3D inverse dynamics problems. Methods: Ten healthy males volunteered to perform squat lifting of a box with a load of one-tenth of their body weights. The joint moments were calculated using 110 reflective passive markers (46 anatomical markers and 64 tracking markers) and a 3D full body linked segment model. Ground reaction forces and kinematics data were recorded using a Vicon system with two parallel Kistler force plates. Three-dimensional Newton–Euler equations of motion with bottom-up and least squares solutions were applied to calculate joint moments. The peak and mean values of the joint moments were determined to check the quantitative differences as well as the time-to-peak value of the moment curves was determined to check the temporal differences between the two inverse dynamics solutions. Results: Significant differences (all [Formula: see text]-[Formula: see text]) between the two inverse dynamics solutions were detected for the peak values of the hip (right and left sides) and L5–S1 joint moments in the lateral anatomical direction as well significant differences (all [Formula: see text]-[Formula: see text]) were detected for the peak and mean values of the L5–S1 joint moment in all anatomical directions. Moreover, small differences (all [Formula: see text]) were detected between the two inverse dynamic solutions for the calculated lower body joint moments. Conclusions: The findings of this study clarified the disadvantages of the straightforward solutions and demonstrated that the bottom-up solution may not be accurate for more distal measures from the force plate (for hip and S1–L5) but it may be accurate for more proximal joints (ankle and knee) in 3D inverse dynamics analysis.

A Well-Posed, Embedded Constraint Representation of Joint Moments From Kinesiological Measurements

2000 ◽  
Vol 122 (4) ◽  
pp. 437-445 ◽  
Author(s):  
Behzad Dariush ◽  
Hooshang Hemami ◽  
Mohamad Parnianpour
Keyword(s):  
Inverse Dynamics ◽  
Force Plate ◽  
Dynamics Analysis ◽  
Noise Levels ◽  
Joint Moments ◽  
Planar System ◽  
Open Chain ◽  
Inverse Dynamics Analysis ◽  
Well Posed ◽  
Dynamics Method

Joint moment estimation using the traditional inverse dynamics analysis presents two challenging problems, which limit its reliability. First, the quality of the computed moments depends directly on unreliable estimates of the segment accelerations obtained numerically by differentiating noisy marker measurements. Second, the representation of joint moments from combined video and force plate measurements belongs to a class of ill-posed problems, which does not possess a unique solution. This paper presents a well-posed representation derived from an embedded constraint equation. The proposed method, referred to as the embedded constraint representation (ECR), provides unique moment estimates, which satisfy all measurement constraints and boundary conditions and require fewer acceleration components than the traditional inverse dynamics method. Specifically, for an n-segment open chain planar system, the ECR requires n−3 acceleration components as compared to 3n−1 components required by the traditional (from ground up) inverse dynamics analysis. Based on a simulated experiment using a simple three-segment model, the precision of the ECR is evaluated at different noise levels and compared to the traditional inverse dynamics technique. At the lowest noise levels, the inverse dynamics method is up to 50 percent more accurate while at the highest noise levels the ECR method is up to 100 percent more accurate. The ECR results over the entire range of noise levels reveals an average improvement on the order 20 percent in estimating the moments distal to the force plate and no significant improvement in estimating moments proximal to the force plate. The new method is particularly advantageous in a combined video, force plate, and accelerometery sensing strategy. [S0148-0731(00)01904-X]

Influence of Modern Studded and Bladed Soccer Boots and Sidestep Cutting on Knee Loading during Match Play Conditions

2007 ◽  
Vol 35 (9) ◽  
pp. 1528-1536 ◽  
Author(s):  
Rajiv Kaila
Keyword(s):  
Inverse Dynamics ◽  
Cruciate Ligament ◽  
Three Dimensional ◽  
Match Play ◽  
Joint Forces ◽  
Significant Difference ◽  
Knee Loading ◽  
Anterior Cruciate ◽  
Inverse Dynamics Analysis ◽  
Straight Ahead

Background The influence of modern studded and bladed soccer boots and sidestep cutting on noncontact knee loading during match play conditions is not fully understood. Hypothesis Modern soccer boot type and sidestep cutting compared with straight-ahead running do not significantly influence knee internal tibia axial and valgus moments, anterior joint forces, and flexion angles. Study Design Controlled laboratory study. Methods Fifteen professional male outfield soccer players undertook trials of straight-ahead running and sidestep cutting at 30° and 60° with a controlled approach velocity on a Fédération Internationale de Football Association (FIFA) approved soccer surface. Two bladed and 2 studded soccer boots from 2 manufacturers were investigated. Three-dimensional inverse dynamics analysis determined externally applied internal/external tibia axial and valgus/varus moments, anterior forces, and flexion angles throughout stance. Results The soccer boot type imparted no significant difference on knee loading for each maneuver. Internal tibia and valgus moments were significantly greater for sidestep cutting at 30° and 60° compared with straight-ahead running. Sidestep cutting at 60° compared with straight-ahead running significantly increased anterior joint forces. Conclusion Varying soccer boot type had no effect on knee loading for each maneuver, but sidestep cutting significantly increased internal tibia and valgus moments and anterior joint forces. Clinical Relevance Sidestep cutting, irrespective of the modern soccer boot type worn, may be implicated in the high incidence of noncontact soccer anterior cruciate ligament injuries by significantly altering knee loading.

scholarly journals An Engineering Model of Human Balance Control—Part I: Biomechanical Model

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Joseph E. Barton ◽  
Anindo Roy ◽  
John D. Sorkin ◽  
Mark W. Rogers ◽  
Richard Macko
Keyword(s):  
Inverse Dynamics ◽  
Balance Control ◽  
Dimensional Space ◽  
Young Subject ◽  
Reaction Force ◽  
Three Dimensional ◽  
Balance Training ◽  
Biomechanical Model ◽  
Measurement Tool ◽  
Inverse Dynamics Analysis

We developed a balance measurement tool (the balanced reach test (BRT)) to assess standing balance while reaching and pointing to a target moving in three-dimensional space according to a sum-of-sines function. We also developed a three-dimensional, 13-segment biomechanical model to analyze performance in this task. Using kinematic and ground reaction force (GRF) data from the BRT, we performed an inverse dynamics analysis to compute the forces and torques applied at each of the joints during the course of a 90 s test. We also performed spectral analyses of each joint's force activations. We found that the joints act in a different but highly coordinated manner to accomplish the tracking task—with individual joints responding congruently to different portions of the target disk's frequency spectrum. The test and the model also identified clear differences between a young healthy subject (YHS), an older high fall risk (HFR) subject before participating in a balance training intervention; and in the older subject's performance after training (which improved to the point that his performance approached that of the young subject). This is the first phase of an effort to model the balance control system with sufficient physiological detail and complexity to accurately simulate the multisegmental control of balance during functional reach across the spectra of aging, medical, and neurological conditions that affect performance. Such a model would provide insight into the function and interaction of the biomechanical and neurophysiological elements making up this system; and system adaptations to changes in these elements' performance and capabilities.

Gait Analysis Using Multibody Simulation Tools and Inverse Dynamics Procedures

2005 ◽  
Author(s):  
Miguel Silva ◽  
Jorge Ambro´sio
Keyword(s):  
Gait Analysis ◽  
Inverse Dynamics ◽  
Three Dimensional ◽  
Biomechanical Model ◽  
Whole Body ◽  
Dynamics Analysis ◽  
Natural Coordinates ◽  
Kinematic Constraints ◽  
Biomechanical Models ◽  
Inverse Dynamics Analysis

The use of inverse dynamics methodologies for the evaluation of intersegmental reaction forces and the moments-of-force at the anatomical joints, in the framework of gait analysis, not only requires that appropriate biomechanical models are used but also that kinematic and kinetic data sets are available. This paper discusses the quality of the results of the inverse dynamics analysis with respect to the filtering procedures used and the kinematic consistency of the position, velocity and acceleration data. A three-dimensional whole body response biomechanical model based on a multibody formulation with natural coordinates is used. The model has 16 anatomical segments that are described using 33 rigid bodies in a total of 44 degrees-of-freedom. In biomechanical applications, one of the advantages of the current formulation is that the set of anatomical points used to reconstruct the spatial motion of the subject is also used to construct the set of natural coordinates that describe the biomechanical model itself. Based on the images collected by four synchronized video cameras, the three-dimensional trajectories of the anatomical points are reconstructed using standard photogrammetry techniques and Direct Linear Transformations. The trajectories obtained are then filtered in order to reduce the noise levels introduced during the reconstruction procedure using 2nd order Butterworth low-pass filters with properly chosen cut-off frequencies. The filtered data is used in the inverse dynamics analysis either directly or after being modified in order to ensure its consistency with the biomechanical model’s kinematic constraints. It is also shown that the use of velocities and accelerations consistent with the kinematic constraints or those obtained through the time derivatives of the spline interpolation curves of the reconstructed trajectories lead to similar results.

A Novel Three-Dimensional Gait Analysis System

2012 ◽  
Vol 569 ◽  
pp. 352-355 ◽  
Author(s):  
Tao Liu ◽  
Yoshio Inoue ◽  
Kyoko Shibata ◽  
Kozou Shiojima ◽  
Ji Bin Yin
Keyword(s):  
Wireless Local Area Network ◽  
Inverse Dynamics ◽  
Local Area Network ◽  
Reaction Force ◽  
Force Plate ◽  
Three Dimensional ◽  
Local Area ◽  
Area Network ◽  
Data Logger ◽  
Joint Moments

Three-dimensional (3D) lower limb kinematic and kinetic analysis based on ambulatory measurements is introduced in this paper. We developed a wireless sensor system composed of a mobile force plate system, 3D motion sensor units and a wireless data logger. 3D motions of body segment and triaxial ground reaction force (GRF) could be simultaneously measured using the system, and the data obtained from sensor units on thighs, shanks and feet could be transferred to a personal computer by wireless local area network (LAN). An inverse dynamics method was adopted to calculate triaxial joint moments. The accuracy of kinematics and kinetics (joint moments) assessment is validated against results obtained from the stationary measurement system based on camera movement analysis and force plates.

Three-Dimensional Knee Joint Loading in Alpine Skiing: A Comparison Between a Carved and a Skidded Turn

2012 ◽  
Vol 28 (6) ◽  
pp. 655-664 ◽  
Author(s):  
Miriam Klous ◽  
Erich Müller ◽  
Hermann Schwameder
Keyword(s):  
Knee Joint ◽  
Inverse Dynamics ◽  
Small Sample Size ◽  
Three Dimensional ◽  
Small Sample ◽  
High Rate ◽  
Joint Loading ◽  
Joint Forces ◽  
Inverse Dynamics Analysis ◽  
Knee Joint Loading

Limited data exists on knee biomechanics in alpine ski turns despite the high rate of injuries associated with this maneuver. The purpose of the current study was to compare knee joint loading between a carved and a skidded ski turn and between the inner and outer leg. Kinetic data were collected using Kistler mobile force plates. Kinematic data were collected with five synchronized, panning, tilting, and zooming cameras. Inertial properties of the segments were calculated using an extended version of the Yeadon model. Knee joint forces and moments were calculated using inverse dynamics analysis. The obtained results indicate that knee joint loading in carving is not consistently greater than knee joint loading in skidding. In addition, knee joint loading at the outer leg is not always greater than at the inner leg. Differentiation is required between forces and moments, the direction of the forces and moments, and the phase of the turn that is considered. Even though the authors believe that the analyzed turns are representative, results have to be interpreted with caution due to the small sample size.

Three-Dimensional Knee Joint Moments During Performance of the Bodyweight Squat: Effects of Stance Width and Foot Rotation

2013 ◽  
Vol 29 (1) ◽  
pp. 33-43 ◽  
Author(s):  
Sivan Almosnino ◽  
David Kingston ◽  
Ryan B. Graham
Keyword(s):  
Knee Joint ◽  
Internal Rotation ◽  
Rotation Angle ◽  
Three Dimensional ◽  
Principal Component ◽  
Moment Magnitude ◽  
Joint Moments ◽  
Flexion Moment ◽  
Knee Joint Moment ◽  
Healthy Participants

The purpose of this investigation was to assess the effects of stance width and foot rotation angle on three-dimensional knee joint moments during bodyweight squat performance. Twenty-eight participants performed 8 repetitions in 4 conditions differing in stance or foot rotation positions. Knee joint moment waveforms were subjected to principal component analysis. Results indicated that increasing stance width resulted in a larger knee flexion moment magnitude, as well as larger and phase-shifted adduction moment waveforms. The knee’s internal rotation moment magnitude was significantly reduced with external foot rotation only under the wide stance condition. Moreover, squat performance with a wide stance and externally rotated feet resulted in a flattening of the internal rotation moment waveform during the middle portion of the movement. However, i is speculated that the differences observed across conditions are not of clinical relevance for young, healthy participants.

Other topics

2018 ◽  
Author(s):  
Ted Janssen ◽  
Gervais Chapuis ◽  
Marc de Boissieu
Keyword(s):  
Photonic Crystals ◽  
Crystal Morphology ◽  
Three Dimensional ◽  
Icosahedral Quasicrystal ◽  
Crystal Surfaces ◽  
Decagonal Quasicrystal ◽  
System A ◽  
Fundamental Law ◽  
Quasiperiodic Systems ◽  
Aperiodic Crystals

The law of rational indices to describe crystal faces was one of the most fundamental law of crystallography and is strongly linked to the three-dimensional periodicity of solids. This chapter describes how this fundamental law has to be revised and generalized in order to include the structures of aperiodic crystals. The generalization consists in using for each face a number of integers, with the number corresponding to the rank of the structure, that is, the number of integer indices necessary to characterize each of the diffracted intensities generated by the aperiodic system. A series of examples including incommensurate multiferroics, icosahedral crystals, and decagonal quaiscrystals illustrates this topic. Aperiodicity is also encountered in surfaces where the same generalization can be applied. The chapter discusses aperiodic crystal morphology, including icosahedral quasicrystal morphology, decagonal quasicrystal morphology, and aperiodic crystal surfaces; magnetic quasiperiodic systems; aperiodic photonic crystals; mesoscopic quasicrystals, and the mineral calaverite.

Sign in / Sign up

Export Citation Format

Share Document