scholarly journals Light Shelf Development Using Folding Technology and Photovoltaic Modules to Increase Energy Efficiency in Building

Buildings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 81
Author(s):  
Heangwoo Lee ◽  
Sowon Han ◽  
Janghoo Seo
Keyword(s):  
Energy Efficiency ◽  
Energy Use ◽  
Building Energy ◽  
Photovoltaic Module ◽  
Generation Efficiency ◽  
Photovoltaic Modules ◽  
Increase Energy Efficiency

Some recent research in the area of light shelves has been focused on applying photovoltaic modules to light shelves to save building energy. However, due to the modules installed on the light shelf reflectors, most such light shelves have failed to improve both daylighting and generation efficiency. This study proposes a folding technology to improve light shelves’ daylighting and generation efficiency that uses photovoltaic modules and validates their performance using a testbed. The major obtained findings are as follows: (1) The proposed folding technology has a structure in which reflectors and photovoltaic modules fold alternately by modularizing the light shelf. The reflector and photovoltaic modules are controlled by adjusting the degree of folding. (2) Because light shelf angles for improving daylighting and generation differed depending on the application of the photovoltaic module, the optimal light shelf specifications differed. (3) Compared to previous light shelf technologies, the light shelf with folding technology and a photovoltaic module reduced energy use by 31.3% to 38.2%. This demonstrates the efficacy of the proposed system. (4) Applying a photovoltaic module can lower the indoor uniformity ratio, which means that the daylighting performance of the light shelf is degraded due to the reduction of the area occupied by the reflector.

scholarly journals Spatial and Behavioral Thermal Adaptation in Net Zero Energy Buildings: An Exploratory Investigation

2020 ◽  
Vol 12 (19) ◽  
pp. 7961 ◽  
Author(s):  
Shady Attia
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Use ◽  
Thermal Adaptation ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Zero Energy ◽  
Net Zero Energy ◽  
Net Zero ◽  
Energy Efficiency Standards

Climate responsive design can amplify the positive environmental effects necessary for human habitation and constructively engage and reduce the energy use of existing buildings. This paper aims to assess the role of the thermal adaptation design strategy on thermal comfort perception, occupant behavior, and building energy use in twelve high-performance Belgian households. Thermal adaptation involves thermal zoning and behavioral adaptation to achieve thermal comfort and reduce energy use in homes. Based on quantitative and qualitative fieldwork and in-depth interviews conducted in Brussels, the paper provides insights on the impact of using mechanical systems in twelve newly renovated nearly- and net-zero energy households. The article calls for embracing thermal adaptation as a crucial design principle in future energy efficiency standards and codes. Results confirm the rebound effect in nearly zero energy buildings and the limitation of the current building energy efficiency standards. The paper offers a fresh perspective to the field of building energy efficiency that will appeal to researchers and architects, as well as policymakers.

scholarly journals Potential and Impacts of Cogeneration in Tropical Climate Countries: Ecuador as a Case Study

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5254
Author(s):  
Manuel Raul Pelaez-Samaniego ◽  
Juan L. Espinoza ◽  
José Jara-Alvear ◽  
Pablo Arias-Reyes ◽  
Fernando Maldonado-Arias ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Fossil Fuels ◽  
Energy Use ◽  
National Level ◽  
Ghg Emissions ◽  
Industrial Sector ◽  
Increase Energy Efficiency ◽  
High Dependency ◽  
Generation Capacity ◽  
Tropical Climates

High dependency on fossil fuels, low energy efficiency, poor diversification of energy sources, and a low rate of access to electricity are challenges that need to be solved in many developing countries to make their energy systems more sustainable. Cogeneration has been identified as a key strategy for increasing energy generation capacity, reducing greenhouse gas (GHG) emissions, and improving energy efficiency in industry, one of the most energy-demanding sectors worldwide. However, more studies are necessary to define approaches for implementing cogeneration, particularly in countries with tropical climates (such as Ecuador). In Ecuador, the National Plan of Energy Efficiency includes cogeneration as one of the four routes for making energy use more sustainable in the industrial sector. The objective of this paper is two-fold: (1) to identify the potential of cogeneration in the Ecuadorian industry, and (2) to show the positive impacts of cogeneration on power generation capacity, GHG emissions reduction, energy efficiency, and the economy of the country. The study uses methodologies from works in specific types of industrial processes and puts them together to evaluate the potential and analyze the impacts of cogeneration at national level. The potential of cogeneration in Ecuador is ~600 MWel, which is 12% of Ecuador’s electricity generation capacity. This potential could save ~18.6 × 106 L/month of oil-derived fuels, avoiding up to 576,800 tCO2/year, and creating around 2600 direct jobs. Cogeneration could increase energy efficiency in the Ecuadorian industry by up to 40%.

scholarly journals The New Market Transformation Needed for Commercial Building Energy Efficiency

2016 ◽  
Vol 9 (1) ◽  
pp. 229
Author(s):  
Valerie Patrick ◽  
Leslie A. Billhymer ◽  
William Shephard
Keyword(s):  
Energy Efficiency ◽  
Energy Use ◽  
Building Energy ◽  
Department Of Energy ◽  
Building Energy Efficiency ◽  
Commercial Building ◽  
Innovation Cluster ◽  
Stakeholder Perspectives ◽  
Regional Market ◽  
Market Transformation

The U.S. Department of Energy [DOE] established the Consortium for Building Energy Innovation [CBEI] to address commercial building energy efficiency as an innovation cluster, where the regional market context (Note 1) guides the research agenda for market transformation (Porter, 2001). CBEI develops content to support Advanced Energy Retrofits (AERs), a retrofit which results in 50% or greater reduction in building energy use, in small- and medium- sized commercial buildings (less than 250 000 ft<sup>2</sup>). The challenge is collecting input for a market with many stakeholders so that a strategy emerges to implement AERs. This research applies systems and complexity theories to develop a strategy to promote the emergence of AERs in this market incorporating multiple stakeholder perspectives (Note 2).

Evaluation of Cooling, Heating, and Power (CHP) Systems Based on Building Energy-Rating

2007 ◽  
Author(s):  
N. Fumo ◽  
P. J. Mago ◽  
L. M. Chamra
Keyword(s):  
Energy Efficiency ◽  
Economic Analysis ◽  
Energy Efficient ◽  
Energy Use ◽  
Management Practices ◽  
Building Energy ◽  
Energy Performance ◽  
Energy Star ◽  
Star Rating ◽  
Energy Efficient Buildings

Cooling, Heating and Power (CHP) systems are a form of distributed generation that uses internal combustion prime-power engines to generate electricity while recovering heat for other uses. CHP is a promising technology for increasing energy efficiency through the use of distributed electric and thermal energy recovery-delivery systems at or near end-user sites. Although this technology seems to be economically feasible, the evaluation and comparison of CHP systems cannot be restricted to economical considerations only. Standard economic analysis, such as life cycle economic analysis, does not take in consideration all the benefits that can be obtained from this technology. For this reason, several aspects to perform a non-conventional evaluation of CHP systems have to be considered. Among the aspects to be included in a non-conventional evaluation are: power reliability, power quality, environmental quality, energy-efficient buildings, fuel source flexibility, brand and marketing benefits, protection from electric rate hikes, and benefits from promoting energy management practices. Some benefits of these non-economical evaluations can be transferred into an economic evaluation but others give intangible potential to the technology. This paper focus on a non-conventional evaluation based on energy-efficient buildings, which is associated to energy conservation and improvement of the building energy performance rating for government energy programs like Energy Star and Leadership in Energy and Environmental Design (LEED). Results show that the use of CHP systems could improve the Energy Star Rating in more than 50 points. The Energy Star Rating is significant on the LEED Rating as a building can score up to 10 points of the 23 available in the Energy & Atmosphere category on energy efficiency alone. As much as 8 points can be obtained in this category due to the Energy Star rating increment from the use of CHP systems. Clearly the use of CHP systems will help building owners to reach the benefits from these energy programs while improving the overall energy use and energy cost.

Analysis of the Energy Saving Potentials for Near-Zero Energy Buildings in Shanghai

2011 ◽  
Author(s):  
Joe Huang ◽  
Donghyun Seo ◽  
Moncef Krarti
Keyword(s):  
Energy Efficiency ◽  
Energy Use ◽  
Energy Savings ◽  
Cost Effective ◽  
Building Energy ◽  
Hot Water ◽  
Energy Usage ◽  
Ground Source Heat Pumps ◽  
Capital Costs ◽  
Building Models

The Changning District in Shanghai has expressed interest to becoming a green neighborhood and has asked for recommendations on how to reduce the energy usage in public buildings in their district. The objective of this short study is to identify the likely range of further reductions in the energy use and carbon emissions of new buildings through energy-efficiency improvements and the use of renewable energy, i.e., solar hot water (SHW), photovoltaics (PV), and ground-source heat pumps (GSHP), as compared to buildings that meet the current public building energy code in Shanghai. This analysis is done using DOE-2.1E computer simulations of three prototypical building models — an office, a hotel, and a mixed-use retail/office building — that have been calibrated against measured energy data from such buildings in the Changning District. After the building models have been calibrated, they are then used to establish the baseline energy use for code-compliant buildings, and to calculate the energy savings for 16 potential EEMs (Energy Efficiency Measures) that exceed the building energy code. A LCC (Life-Cycle Cost) analysis is done to compare the energy cost reductions to the capital costs for the EEMs, with the result that some EEMs are rejected as being not cost-effective over a 25 year period. The usage of the EEMs accepted as cost-effective is found to reduce the energy usage of the three building types by 30–40% in the office, 43–46% in the hotel, and 35% in the retail, depending on the assumed discount rate. If all the EEMs are considered regardless of cost, the energy savings increase to 44% in the office, 47% in the hotel, and 36% in the retail.

scholarly journals Energy Efficiency in the Supply Chains of the Aluminium Industry: The Cases of Five Products Made in Sweden

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 245 ◽  
Author(s):  
Joakim Haraldsson ◽  
Maria Johansson
Keyword(s):  
Energy Efficiency ◽  
Focus Group ◽  
Supply Chains ◽  
Global Economy ◽  
Energy Use ◽  
Improve Energy Efficiency ◽  
Increase Energy Efficiency ◽  
Energy Efficiency Improvement ◽  
Group Interviews ◽  
Made In

Improved energy efficiency in supply chains can reduce both environmental impact and lifecycle costs, and thus becomes a competitive advantage in the work towards a sustainable global economy. Viewing the supply chain as a system provides the holistic perspective needed to avoid sub-optimal energy use. This article studies measures relating to technology and management that can increase energy efficiency in the supply chains of five aluminium products made in Sweden. Additionally, energy efficiency potentials related to the flows of material, energy, and knowledge between the actors in the supply chains are studied. Empirical data was collected using focus group interviews and one focus group per product was completed. The results show that there are several areas for potential energy efficiency improvement; for example, product design, communication and collaboration, transportation, and reduced material waste. Demands from other actors that can have direct or indirect effects on energy use in the supply chains were identified. Despite the fact that companies can save money through improved energy efficiency, demands from customers and the authorities would provide the additional incentives needed for companies to work harder to improve energy efficiency.

scholarly journals A Review on Building Energy Efficiency Techniques

2018 ◽  
Vol 7 (4.35) ◽  
pp. 35 ◽  
Author(s):  
Abbas M. Al-Ghaili ◽  
Hairoladenan Kasim ◽  
Marini Othman ◽  
Zainuddin Hassan
Keyword(s):  
Energy Efficiency ◽  
Interior Design ◽  
Energy Use ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Light Control ◽  
Different Types ◽  
Save Energy ◽  
High Level ◽  
Published Research

This paper highlights a number of recently published research studies during last five years in order to provide a summary related to latest trends of energy efficiency in the smart buildings technology. It reviews numerous technical methods applied to achieve a high level of Building Energy Efficiency (BEE). In this paper, methods applied to measure the BEE and to predict the energy-use have been considered and reviewed. Furthermore, some other methods discussed in articles which consider retrofitting of interior design of buildings have been taken. One of the most impacts that has been considered is the light control system because it directly affects the energy use. This paper has reviewed different types of techniques that save energy consumptions such as predictive techniques of energy use, Internet of Things (IoT) buildings, light control systems inside buildings, and Quick Response (QR) code based services used to notify occupants for energy-use. It has provided a simple comparison between different techniques used to retrofit the interior design of buildings due to its high importance in saving energy. The paper has also recommended suitability of methods taking into account the existing situation, design, limitations, and conditions of the building being studied.

scholarly journals How Much Energy Do Building Energy Codes Save? Evidence from California Houses

2016 ◽  
Vol 106 (10) ◽  
pp. 2867-2894 ◽  
Author(s):  
Arik Levinson
Keyword(s):  
Energy Efficiency ◽  
Environmental Policy ◽  
Energy Use ◽  
Energy Savings ◽  
Building Energy ◽  
Energy Codes ◽  
New Buildings ◽  
Building Energy Codes

Regulations governing the energy efficiency of new buildings have become a cornerstone of US environmental policy. California enacted the first such codes in 1978 and has tightened them every few years since. I evaluate the resulting energy savings three ways: comparing energy used by houses constructed under different standards, controlling for building and occupant characteristics; examining how energy use varies with outdoor temperatures; and comparing energy used by houses of different vintages in California to that same difference in other states. All three approaches yield estimated energy savings significantly short of those projected when the regulations were enacted. (JEL Q48, Q51, Q52)

scholarly journals Improving the Energy Efficiency of Buildings Based on Fluid Dynamics Models: A Critical Review

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5384
Author(s):  
Xiaoshu Lü ◽  
Tao Lu ◽  
Tong Yang ◽  
Heidi Salonen ◽  
Zhenxue Dai ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Energy Efficiency ◽  
Energy Use ◽  
Energy Savings ◽  
Simulation Models ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Open Questions ◽  
Building Energy Systems ◽  
Dynamics Models

The built environment is the global sector with the greatest energy use and greenhouse gas emissions. As a result, building energy savings can make a major contribution to tackling the current energy and climate change crises. Fluid dynamics models have long supported the understanding and optimization of building energy systems and have been responsible for many important technological breakthroughs. As Covid-19 is continuing to spread around the world, fluid dynamics models are proving to be more essential than ever for exploring airborne transmission of the coronavirus indoors in order to develop energy-efficient and healthy ventilation actions against Covid-19 risks. The purpose of this paper is to review the most important and influential fluid dynamics models that have contributed to improving building energy efficiency. A detailed, yet understandable description of each model’s background, physical setup, and equations is provided. The main ingredients, theoretical interpretations, assumptions, application ranges, and robustness of the models are discussed. Models are reviewed with comprehensive, although not exhaustive, publications in the literature. The review concludes by outlining open questions and future perspectives of simulation models in building energy research.

Sign in / Sign up

Export Citation Format

Share Document