scholarly journals Porous Silica-Based Organic-Inorganic Hybrid Catalysts: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 79
Author(s):  
Andrea Erigoni ◽  
Urbano Diaz
Keyword(s):  
Active Sites ◽  
Sol Gel ◽  
Porous Silica ◽  
Silyl Derivative ◽  
Inorganic Hybrid ◽  
Inorganic Solids ◽  
Hybrid Catalysts ◽  
Different Types ◽  
General Scope ◽  
Catalytic Performances

Hybrid organic-inorganic catalysts have been extensively investigated by several research groups in the last decades, as they allow combining the structural robust-ness of inorganic solids with the versatility of organic chemistry. Within the field of hybrid catalysts, synthetic strategies based on silica are among the most exploitable, due to the convenience of sol-gel chemistry, to the array of silyl-derivative precursors that can be synthesized and to the number of post-synthetic functionalization strategies available, amongst others. This review proposes to highlight these advantages, firstly describing the most common synthetic tools and the chemistry behind sol-gel syntheses of hybrid catalysts, then presenting exemplificative studies involving mono- and multi-functional silica-based hybrid catalysts featuring different types of active sites (acid, base, redox). Materials obtained through different approaches are described and their properties, as well as their catalytic performances, are compared. The general scope of this review is to gather useful information for those approaching the synthesis of organic-inorganic hybrid materials, while providing an overview on the state-of-the art in the synthesis of such materials and highlighting their capacities.

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

scholarly journals Development of Novel Oral Formulations of Disulfide Antioxidants Based on Porous Silica for Controlled Release of the Drugs

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 963
Author(s):  
Ekaterina S. Dolinina ◽  
Elena V. Parfenyuk
Keyword(s):  
Antioxidant Activity ◽  
Surface Chemistry ◽  
Sol Gel ◽  
Porous Silica ◽  
The Body ◽  
Oral Drug ◽  
Therapeutic Concentration ◽  
Release Process ◽  
Zero Order Kinetics ◽  
Long Time

Powerful antioxidant α-lipoic acid (LA) exhibits limited therapeutic efficiency due to its pharmacokinetic properties. Therefore, the purpose of this work was to evaluate the ability of silica-based composites of LA as well as its amide (lipoamide, LM), as new oral drug formulations, to control their release and maintain their therapeutic concentration and antioxidant activity in the body over a long time. The composites synthesized at different sol–gel synthesis pH and based on silica matrixes with various surface chemistry were investigated. The release behavior of the composites in media mimicking pH of digestive fluids (pH 1.6, 6.8, and 7.4) was revealed. The effects of chemical structure of the antioxidants, synthesis pH, surface chemistry of the silica matrixes in the composites as well as the pH of release medium on kinetic parameters of the drug release and mechanisms of the process were discussed. The comparative analysis of the obtained data allowed the determination of the most promising composites. Using these composites, modeling of the release process of the antioxidants in accordance with transit conditions of the drugs in stomach, proximal, and distal parts of small intestine and colon was carried out. The composites exhibited the release close to the zero order kinetics and maintained the therapeutic concentration of the drugs and antioxidant effect in all parts of the intestine for up to 24 h. The obtained results showed that encapsulation of LA and LM in the silica matrixes is a promising way to improve their bioavailability and antioxidant activity.

scholarly journals Preparation and Electrochemical Characterization of Organic–Inorganic Hybrid Poly(Vinylidene Fluoride)-SiO2 Cation-Exchange Membranes by the Sol-Gel Method Using 3-Mercapto-Propyl-Triethoxyl-Silane

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3265 ◽  
Author(s):  
Li ◽  
Li ◽  
Li ◽  
Guan ◽  
Zheng ◽  
...  
Keyword(s):  
Membrane Potential ◽  
Oxidative Stability ◽  
Water Uptake ◽  
Polyvinylidene Fluoride ◽  
Vinylidene Fluoride ◽  
Sol Gel ◽  
Synthesis Method ◽  
Co2 Production ◽  
Inorganic Hybrid ◽  
Poly Vinylidene Fluoride

A new synthesis method for organic–inorganic hybrid Poly(vinylidene fluoride)-SiO2 cation-change membranes (CEMs) is proposed. This method involves mixing tetraethyl orthosilicate (TEOS) and 3-mercapto-propyl-triethoxy-silane (MPTES) into a polyvinylidene fluoride (PVDF) sol-gel solution. The resulting slurry was used to prepare films, which were immersed in 0.01 M HCl, which caused hydrolysis and polycondensation between the MPTES and TEOS. The resulting Si-O-Si polymers chains intertwined and/or penetrated the PVDF skeleton, significantly improving the mechanical strength of the resulting hybrid PVDF-SiO2 CEMs. The -SH functional groups of MPTES oxidized to-SO3H, which contributed to the excellent permeability of these CEMs. The surface morphology, hybrid structure, oxidative stability, and physicochemical properties (IEC, water uptake, membrane resistance, membrane potential, transport number, and selective permittivity) of the CEMs obtained in this work were characterized using scanning electron microscope and Fourier transform infrared spectroscopy, as well as electrochemical testing. Tests to analyze the oxidative stability, water uptake, membrane potential, and selective permeability were also performed. Our organic–inorganic hybrid PVDF-SiO2 CEMs demonstrated higher oxidative stability and lower resistance than commercial Ionsep-HC-C membranes with a hydrocarbon structure. Thus, the synthesis method described in this work is very promising for the production of very efficient CEMs. In addition, the physical and electrochemical properties of the PVDF-SiO2 CEMs are comparable to the Ionsep-HC-C membranes. The electrolysis of the concentrated CoCl2 solution performed using PVDF-SiO2-6 and Ionsep-HC-C CEMs showed that at the same current density, Co2+ production, and current efficiency of the PVDF-SiO2-6 CEM membrane were slightly higher than those obtained using the Ionsep-HC-C membrane. Therefore, our novel membrane might be suitable for the recovery of cobalt from concentrated CoCl2 solutions.

Synthesis and Intermolecularly Mediated Assembly of Organic Pigment in Hybrid Coating Films

1998 ◽  
Vol 519 ◽  
Author(s):  
Y. Yan ◽  
Z. Duan ◽  
D.-G. Chen ◽  
S. Ray Chaudhuri
Keyword(s):  
Sol Gel ◽  
Hybrid Coating ◽  
Hypsochromic Shift ◽  
Hybrid Films ◽  
Coating Films ◽  
Organic Pigment ◽  
Inorganic Hybrid ◽  
Matrix Interactions ◽  
Sol Gel Process

AbstractThe insoluble, strongly hydrogen bonded organic pigment of 3,6-bis-(4-chlorphenyl)-l,4- diketopyrrolo [3,4-c] pyrrole was transiently blocked by adding carbamate groups, and consequently incorporated into organic-inorganic hybrid matrices by a sol-gel process. The homo- (pigment-pigment) and hetero-intermolecular (pigment-matrix) interactions were found to control both the assembly and dispersion of pigment molecules in the hybrid coating films. A weaker interaction between matrices and pigment molecules results in aggregation of the carbamate pigment in the methyl-silicate films. A stronger interaction forms a homogenous dispersion and coloration of the phenyl-silicate films. The as-prepared methyl- and phenylsilicate films doped with the organic pigment were distinguished by a morphology change and a blue (hypsochromic) shift in absorption from 550 to 460 nm. Thermal treatment can remove the carbamate groups and in-situ form the organic pigment in the hybrid films.

A NEW ORGANIC/INORGANIC HYBRID WITH HIGH ELECTRORHEOLOGICAL ACTIVITY

2002 ◽  
Vol 16 (17n18) ◽  
pp. 2454-2460 ◽  
Author(s):  
X. P. ZHAO ◽  
X. DUAN
Keyword(s):  
Activation Energy ◽  
Shear Stress ◽  
Necessary Conditions ◽  
Sol Gel ◽  
Root Temperature ◽  
Sedimentation Stability ◽  
Inorganic Hybrid ◽  
Active Particles ◽  
Static Shear

In-situ sol-gel method to prepare colloidal hybrids of surfactant modified polysucchride and titanium oxide has been presented, and experiments indicated these highly ER active particles exhibited a remarkable ER effect. The static shear stress can be up to 37 k Pa (shear rate 5 S -1) under DC field of 4 kV/mm at root temperature, well above that of simple blends of starch and TiO 2. In the meanwhile, temperature dependence and sedimentation stability were also greatly improved. Based on recent experimental facts, we find that dielectric properties and surface (interface) activity are two necessary conditions fulfilling the requirement of high ER activity. Adequate grinding of particles with oil can effectively enhance the shear stress, which may be owed to the decline of the activation energy needed for restructuring. It has provided us a new horizon for preparation of excellent ER materials and further studies should be continued to make.

Bioencapsulation in Sol-Gel Glasses

1998 ◽  
Vol 519 ◽  
Author(s):  
L. Bergogne ◽  
S. Fennouh ◽  
J. Livage ◽  
C. Roux
Keyword(s):  
Sol Gel ◽  
Porous Silica ◽  
Silica Matrix ◽  
Whole Cells ◽  
The Past ◽  
Wide Range ◽  
Activity Of Enzymes ◽  
Gel Glasses ◽  
Micro Organisms

AbstractBioencapsulation in sol-gel materials has been widely studied during the past decade. Trapped species appear to retain their bioactivity in the porous silica matrix. Small analytes can diffuse through the pores allowing bioreactions to be performed in-situ, inside the sol-gel glass. A wide range of biomolecules and micro-organisms have been encapsulated. The catalytic activity of enzymes is used for the realization of biosensors or bioreactors. Antibody-antigen recognition has been shown to be feasible within sol-gel matrices. Trapped antibodies bind specifically the corresponding haptens and can be used for the detection of traces of chemicals. Even whole cells are now encapsulated without any alteration of their cellular organization. They can be used for the production of chemicals or as antigens for immunoassays.

Organic–inorganic hybrid catalysts containing new Schiff base for environment friendly cyclohexane oxidation

RSC Advances ◽  
2014 ◽  
Vol 4 (81) ◽  
pp. 42816-42824 ◽  
Author(s):  
R. Antony ◽  
S. Theodore David Manickam ◽  
K. Karuppasamy ◽  
Pratap Kollu ◽  
P. V. Chandrasekar ◽  
...  
Keyword(s):  
Schiff Base ◽  
Cyclohexane Oxidation ◽  
Environment Friendly ◽  
Inorganic Hybrid ◽  
Hybrid Catalysts

Organic and inorganic entities have been hybridized using 3-aminopropyltriethoxysilane (APTES) linker for the synthesis of three novel organic–inorganic hybrid catalysts [Cu(ii), Co(ii) and Ni(ii)].

Sign in / Sign up

Export Citation Format

Share Document