scholarly journals LaFeO3 Modified with Ni for Hydrogen Evolution Via Photocatalytic Glucose Reforming in Liquid Phase

Catalysts ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1558
Author(s):  
Giuseppina Iervolino ◽  
Vincenzo Vaiano ◽  
Diana Sannino ◽  
Felipe Puga ◽  
Josè Antonio Navío ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Hydrogen Production ◽  
Significant Role ◽  
Photoelectron Spectroscopy ◽  
Glucose Concentration ◽  
Molecular Hydrogen ◽  
Uv Light ◽  
Initial Glucose Concentration ◽  
X Ray

In this work, the optimization of Ni amount on LaFeO3 photocatalyst was studied in the photocatalytic molecular hydrogen production from glucose aqueous solution under UV light irradiation. LaFeO3 was synthesized via solution combustion synthesis and different amount of Ni were dispersed on LaFeO3 surface through deposition method in aqueous solution and using NaBH4 as reducing agent. The prepared samples were characterized with different techniques: Raman spectroscopy, UltraViolet-Visible Diffuse Reflectance Spettroscopy (UV–Vis-DRS), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), X-ray Fluorescence (XRF), Transmission Electron microscopy (TEM), and Scanning Electron microscopy (SEM) analyses. For all the investigated photocatalysts, the presence of Ni on perovskite surface resulted in a better activity compared to pure LaFeO3. In particular, it is possible to identify an optimal amount of Ni for which it is possible to obtain the best hydrogen production. Specifically, the results showed that the optimal Ni amount was equal to nominal 0.12 wt% (0.12Ni/LaFeO3), for which the photocatalytic H2 production was equal to 2574 μmol/L after 4 h of UV irradiation. The influence of different of photocatalyst dosage and initial glucose concentration was also evaluated. The results of the optimization of operating parameters indicated that the highest molecular hydrogen production was achieved on 0.12Ni/LaFeO3 sample with 1.5 g/L of catalyst dosage and 1000 ppm initial glucose concentration. To determine the reactive species that play the most significant role in the photocatalytic hydrogen production, photocatalytic tests in the presence of different radical scavengers were performed. The results showed that •OH radical plays a significant role in the photocatalytic conversion of glucose in H2. Moreover, photocatalytic tests carried out with D2O instead of H2O evidenced the role of water molecules in the photocatalytic production of molecular hydrogen in glucose aqueous solution.

scholarly journals Green Synthesis of Feather-Shaped MoS2/CdS Photocatalyst for Effective Hydrogen Production

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Yang Liu ◽  
Hongtao Yu ◽  
Xie Quan ◽  
Shuo Chen
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Production ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Sulfur Source ◽  
X Ray ◽  
Transmission Electron ◽  
Microscopy Images ◽  
Effective Hydrogen ◽  
Better Than

MoS2/CdS photocatalyst was fabricated by a hydrothermal method for H2production under visible light. This method used low toxic thiourea as a sulfur source and was carried out at 200°C. Thus, it was better than the traditional methods, which are based on an annealing process at relatively high temperature (above 400°C) using toxic H2S as reducing agent. Scanning electron microscopy and transmission electron microscopy images showed that the morphologies of MoS2/CdS samples were feather shaped and MoS2layer was on the surface of CdS. The X-ray photoelectron spectroscopy testified that the sample was composed of stoichiometric MoS2and CdS. The UV-vis diffuse reflectance spectra displayed that the loading of MoS2can enhance the optical absorption of MoS2/CdS. The photocatalytic activity of MoS2/CdS was evaluated by producing hydrogen. The hydrogen production rate on MoS2/CdS reached 192 μmol·h−1. This performance was stable during three repeated photocatalytic processes.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

scholarly journals Combining the Photocatalysis and Absorption Properties of Core-Shell Cu-BTC@TiO2 Microspheres: Highly Efficient Desulfurization of Thiophenic Compounds from Fuel

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2209 ◽  
Author(s):  
Jing Liu ◽  
Xiao-Min Li ◽  
Jing He ◽  
Lu-Ying Wang ◽  
Jian-Du Lei
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Uv Light ◽  
Sulfur Removal ◽  
Oxidation Products ◽  
Core Shell ◽  
Adsorptive Desulfurization ◽  
X Ray ◽  
Tio2 Microspheres

A core-shell Cu-benzene-1,3,5-tricarboxylic acid (Cu-BTC)@TiO2 was successfully synthesized for photocatalysis-assisted adsorptive desulfurization to improve adsorptive desulfurization (ADS) performance. Under ultraviolet (UV) light irradiation, the TiO2 shell on the surface of Cu-BTC achieved photocatalytic oxidation of thiophenic S-compounds, and the Cu-BTC core adsorbed the oxidation products (sulfoxides and sulfones). The photocatalyst and adsorbent were combined using a distinct core-shell structure. The morphology and structure of the fabricated Cu-BTC@TiO2 microspheres were verified by scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, X-ray powder diffraction, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy analyses. A potential formation mechanism of Cu-BTC@TiO2 is proposed based on complementary experiments. The sulfur removal efficiency of the microspheres was evaluated by selective adsorption of benzothiophene (BT) and dibenzothiophene (DBT) from a model fuel with a sulfur concentration of 1000 ppmw. Within a reaction time of 20 min, the BT and DBT conversion reached 86% and 95%, respectively, and achieved ADS capacities of 63.76 and 59.39 mg/g, respectively. The BT conversion and DBT conversion obtained using Cu-BTC@TiO2 was 6.5 and 4.6 times higher, respectively, than that obtained using Cu-BTC. A desulfurization mechanism was proposed, the interaction between thiophenic sulfur compounds and Cu-BTC@TiO2 microspheres was discussed, and the kinetic behavior was analyzed.

Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures

2011 ◽  
Vol 335-336 ◽  
pp. 460-463 ◽  
Author(s):  
Hong Mei Wang ◽  
Da Peng Zhou ◽  
Yuan Lian ◽  
Ming Pang ◽  
Dan Liu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures

Hexagonal flower-like CdS nanostructures were successfully synthesized through a facile hydrothermal method with thiourea as sulfur source. By combining the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), the structural and morphological characterizations of the products were performed. The photocatalytic activity of CdS nanostructures had been tested by degradation of Rhodamine B (RB) under UV light compared to commercial CdS powders, which indicated that the as-syntherized CdS nanostructures exhibited enhanced photocatalytic activity for degradation of RB. The possible growth mechanism of CdS nanostructures was proposed in the end.

Enhanced ofloxacin degradation efficiency on porous CeTi2O6 photocatalyst-CTAB induced porosity

2020 ◽  
Vol 16 ◽  
Author(s):  
Lili Yang ◽  
Chuanguo Li ◽  
Wenjie Zhang
Keyword(s):  
Electron Microscopy ◽  
Porous Structure ◽  
Photocatalytic Degradation ◽  
Surface Area ◽  
Organic Pollutants ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Uv Light ◽  
Light Illumination ◽  
X Ray

BACKGROUND: Photocatalytic oxidation of organic pollutants in the environment has been studied for more than half a century. Titanate has the activity on degradation of organic pollutants under UV light illumination. Template directed sol-gel method is capable of producing porous structure in titanate during high temperature thermal treatment. METHODS: The materials were characterized using X-ray powder diffraction, transmission electron microscopy, scanning electron microscopy, surface area and pore size analyses, UV-Visible spectrometry, and X-ray photoelectron spectroscopy. Photocatalytic activity of the CeTi2O6 material was evaluated through ofloxacin degradation. RESULTS: Brannerite structured CeTi2O6 was the major component in the samples, and the addition of CTAB caused a slight growth of CeTi2O6 crystals. Porous structure formed in the porous sample after the removal of CTAB template, and the surface area and pore volume were greatly enlarged. The first order reaction rate constant for photocatalytic degradation of ofloxacin was 9.60×10-3 min-1 on the nonporous CeTi2O6 sample, and it was as large as 2.44×10-2 min-1 on the porous CeTi2O6 sample. The addition of CTAB can influence the physico-chemical properties of the porous CeTi2O6, such as the improved activity on photocatalytic degradation of ofloxacin. CONCLUSION: The CeTi2O6 samples were composed of majority brannerite CeTi2O6, and CeTi2O6 crystallite sizes for the nonporous and porous samples were 38.1 and 43.2 nm. The burning up of CTAB during calcination produced abundant pores in the porous material. After 50 min of reaction, photocatalytic degradation efficiencies on the nonporous and porous CeTi2O6 samples were 38.1% and 70.5%.

ZnS NANOFLOWERS ON GRAPHENE FOR USE AS A HIGH-PERFORMANCE PHOTOCATALYST

NANO ◽  
2014 ◽  
Vol 09 (08) ◽  
pp. 1450097 ◽  
Author(s):  
ZENG BIN ◽  
LONG HUI
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Dye Degradation ◽  
Uv Light ◽  
Xps Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Potential Applications

The nanocomposites of graphene loaded– ZnS nanoflowers (GR– ZnS ) had been successfully prepared. Materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectra (FTIR), photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS) spectra. A possible formation mechanism of this architecture was proposed. The experimental results revealed that these nanoflowers exhibited excellent UV-light photocatalytic activities for pollutant methyl orange (MO) dye degradation. These new nanostructures were expected to show considerable potential applications in the water treatment.

Platinum Reduction Study on Pt/C Electro-catalysts for PEMFC

2013 ◽  
Vol 16 (3) ◽  
pp. 141-145
Author(s):  
M.L. Hernandez-Pichardo ◽  
R. Gonzalez-Huerta ◽  
P. del Angel ◽  
E. Palacios-Gonzalez ◽  
M. Tufiño-Velazquez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Reducing Agents ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Platinum Species ◽  
Scanning Electron

Platinum reduction on Pt/C catalysts was studied on samples prepared by the impregnation method using different Pt precursors and reducing agents such as ethanol, sodium borohydride and ethanol-UV light (photo-assisted reduction), in order to compare the efficiency of the different reducing agents. The influence of the reduction level of the platinum species on the electrochemical behavior of these catalysts has been determined. The catalysts were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and linear and cyclic voltammetry. The results show that the reduction level depends mainly on the platinum precursor. Moreover, it was found that the higher electrochemical activity was found using catalysts reduced with ethanol, whereas by using NaBH4 as the reducing agent, the total reduction of the platinum precursor is very difficult in same synthesis conditions. The analysis of the XPS results shows that samples reduced with ethanol presented the lower PtOx/Pt reduction ratio.

Morphology Controllable Preparation of Gold Nanoplates through an Eco-Friendly Wet-Chemical Route

2014 ◽  
Vol 887-888 ◽  
pp. 108-111
Author(s):  
Zao Yi ◽  
Jiang Shan Luo ◽  
Xi Bo Li ◽  
Yong Yi ◽  
Xi Bin Xu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Molar Ratio ◽  
Chemical Route ◽  
X Ray ◽  
Transmission Electron ◽  
Wet Chemical ◽  
Wet Chemical Route ◽  
Controllable Preparation

In this paper a simple eco-friendly wet-chemical way was mentioned to synthesize gold nanoplates. The prepared of the gold nanoplates was a seedless process that carried out by mixing HAuCl4 aqueous solution and Tannic acid (TA) solution at room temperature without the other surfactant and capping agents. The scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) have been used to characterize the shape and composition the prepared gold nanoplates. The molar ratio of HAuCl4 and TA can control the shape and the size of gold nanoplates effectively. This research can provide a simple and eco-friendly way for the prepared gold nanoplates in aqueous solution.

scholarly journals Photoreduction of a Pd-Doped Mesoporous TiO2 Photocatalyst for Hydrogen Production under Visible Light

Catalysts ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 74 ◽  
Author(s):  
Bianca Rusinque ◽  
Salvador Escobedo ◽  
Hugo de Lasa
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Morphological Characteristics ◽  
Production Performance ◽  
Bet Surface Area ◽  
Tio2 Photocatalyst ◽  
X Ray ◽  
Production Of Hydrogen

Photoreduction with visible light can enhance the photocatalytic activity of TiO2 for the production of hydrogen. In this article, we present a strategy to photoreduce a palladium-doped TiO2 photocatalyst by using near-UV light prior to its utilization. A sol-gel methodology was employed to prepare the photocatalysts with different metal loadings (0.25–5.00 wt% Pd). The structural and morphological characteristics of the synthesized Pd-TiO2 were analyzed by using X-ray Diffraction (XRD), BET Surface Area (SBET), TemperatureProgrammed Reduction (TPR), Chemisorption and X-ray Photoelectron Spectroscopy (XPS). Hydrogen was produced by water splitting under visible light irradiation using ethanol as an organic scavenger. Experiments were developed in the Photo-CREC Water-II (PCW-II) Reactor designed at the CREC-UWO (Chemical Reactor Engineering Centre). It was shown that the mesoporous 0.25 wt% Pd-TiO2 with 2.5 1eV band gap exhibits, under visible light, the best hydrogen production performance, with a 1.58% Quantum Yield being achieved.

scholarly journals Enhanced Photocurrent of the Ag Interfaced Topological Insulator Bi2Se3 under UV- and Visible-Light Radiations

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3353
Author(s):  
Chih-Chiang Wang ◽  
Pao-Tai Lin ◽  
Fuh-Sheng Shieu ◽  
Han-Chang Shih
Keyword(s):  
Electron Microscopy ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Visible Range ◽  
Zero Bias ◽  
X Ray ◽  
Topological Quantum ◽  
Conductive Surface ◽  
Narrow Bandgap

Bi2Se3 is a topological quantum material that is used in photodetectors, owing to its narrow bandgap, conductive surface, and insulating bulk. In this work, Ag@Bi2Se3 nanoplatelets were synthesized on Al2O3(100) substrates in a two-step process of thermal evaporation and magnetron sputtering. X-ray diffractometer (XRD), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS) revealed that all samples had the typical rhombohedral Bi2Se3. Field-emission scanning electron microscopy (FESEM)-energy dispersive x-ray spectroscopy (EDS), XPS, and HRTEM confirmed the presence of the precipitated Ag. The optical absorptance of Bi2Se3 nanoplatelets in UV-visible range decreased with the Ag contents. Results of photocurrent measurements under zero-bias conditions revealed that the deposited Ag affected photosensitivity. A total of 7.1 at.% Ag was associated with approximately 4.25 and 4.57 times higher photocurrents under UV and visible light, respectively, than 0 at.% Ag. The photocurrent in Bi2Se3 at 7.1 at.% Ag under visible light was 1.72-folds of that under UV light. This enhanced photocurrent is attributable to the narrow bandgap (~0.35 eV) of Bi2Se3 nanoplatelets, the Schottky field at the interface between Ag and Bi2Se3, the surface plasmon resonance that is caused by Ag, and the highly conductive surface that is formed from Ag and Bi2Se3. This work suggests that the appropriate Ag deposition enhances the photocurrent in, and increases the photosensitivity of, Bi2Se3 nanoplatelets under UV and visible light.

Sign in / Sign up

Export Citation Format

Share Document