scholarly journals Isolation Microgrid Design for Remote Areas with the Integration of Renewable Energy: A Case Study of Con Dao Island in Vietnam

2021 ◽  
Vol 3 (4) ◽  
pp. 804-820
Author(s):  
Quynh T. Tran ◽  
Kevin Davies ◽  
Saeed Sepasi
Keyword(s):  
Renewable Energy ◽  
Hybrid System ◽  
Peak Load ◽  
Design Procedure ◽  
Renewable Energy Resources ◽  
Power Losses ◽  
Diesel Generator ◽  
Pv System ◽  
Remote Areas

In remote areas, extending a power line to the primary electricity grid can be very expensive and power losses are high, making connections to the grid almost impossible. A well-designed microgrid that integrates renewable energy resources can help remote areas reduce investment costs and power losses while providing a reliable power source. Therefore, investigating the design of an independent and economically practical microgrid system for these areas is necessary and plays an important role. This paper introduces a design procedure to design an isolated microgrid using HOMER software for remote areas. In Vietnam, due to the obstruction of the mountainous terrain or the isolated island location, many remote areas or islands need electrification. A simple case study of a hybrid system with a 60 kW peak load demand on Con Dao island in Vietnam is used to illustrate the proposed design method. Specifically, a hybrid system that includes a PV system, batteries, and a diesel generator is designed. To provide the full information of the designed hybrid system designed, each solution is analyzed and evaluated in detail according to the sensitivity parameters.

scholarly journals Stand Alone 1-MW Microgrid for Remote locations of Armed Forces with PV-Battery-Diesel Generator

2020 ◽  
Vol 10 (1) ◽  
pp. 350-358
Keyword(s):  
Renewable Energy ◽  
Solar Power ◽  
Storage System ◽  
Armed Forces ◽  
Diesel Generator ◽  
Pv System ◽  
Night Time ◽  
Power Requirement ◽  
Remote Areas ◽  
Diesel Generators

Many times, Armed Forces are deployed in bases in remote areas on the borders or Islands, which are far flung areas away from mainland. In many such cases, these areas do not have their power requirements through the main grid supply and entire power requirement of the deployment is supplied by diesel generators. These diesel generators have high environmental impact due to emission of greenhouse gases and are highly uneconomical as logistic sustenance of remote bases for supply of fuel is very challenging, Fossil fuel has to be supplied by vehicles, helicopters, boats or manually carried to hill tops. This increases the overall cost of deploying armed forces in remote areas. In recent years with the advancements in power electronic components and renewable energy, development in Microgrids (MGs) have shown a way to reduce dependency on main power grids. Hence, with the help of MGs, renewable energy can be used to fulfill power requirements of the armed forces deployed in remote places. In this work, a MG with capacity of 1MW has been designed keeping the special needs of armed forces as a major consideration. Solar power has been used as a primary renewable energy source in the proposed design. In order to mitigate the adverse effects of meteorological and extreme conditions on the solar power generation capacity, energy storage system in the form of batteries has also been provided. Batteries store power when excess power is generated from the photo voltaic (PV) system and discharge the power when power demand is higher than the PV generated power. Diesel generator sets have also been used to run critical loads, provide reliability and as backup to critical operations catering for outages, night time needs and un-expected meteorological conditions. MATLAB has been used to design and simulate the proposed MG. Working of the MG has also been demonstrated for varying meteorological and varying load conditions as well. The proposed design works satisfactory in all cases.

scholarly journals Paper Modeling of Wind-Solar Hybrid Power System for Off-Grid in Nepal and a Case Study

2020 ◽  
Vol 15 (3) ◽  
pp. 360-367
Author(s):  
Khagendra Bahadur Thapa ◽  
Arbin Maharjan ◽  
Kishor Kaphle ◽  
Kishor Joshi ◽  
Tara Aryal
Keyword(s):  
Renewable Energy ◽  
Power System ◽  
Hybrid System ◽  
Alternative Energy ◽  
Storage System ◽  
Renewable Energy Resources ◽  
Hybrid Power System ◽  
Hybrid Power ◽  
Efficiency And Effectiveness

The adaptation of renewable energy has been increasing in a very encouraging way all over the world. Among various renewable energy resources, wind and solar energy are the promising sources of alternative energy. Wind and solar photovoltaic (PV) have been employed in parallel as a hybrid system for better electricity service. This paper presents a case study and modeling of wind-solar hybrid system in Hriharpur Gadi village, Sindhuli District, Nepal. The hybrid system yields 110kWh of energy per day meeting the village’s electricity demand of 87 kWh per day. Moreover, the hybrid power system with battery storage system is modeled using MATLAB simulator. Further, improvising in the existing modeling has been presented to enhance the efficiency and effectiveness of the system.

scholarly journals Techno-Economic Comparative Analysis of Renewable Energy Systems: Case Study in Zimbabwe

Inventions ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 27 ◽  
Author(s):  
Loiy Al-Ghussain ◽  
Remember Samu ◽  
Onur Taylan ◽  
Murat Fahrioglu
Keyword(s):  
Renewable Energy ◽  
Hybrid System ◽  
Energy Security ◽  
Energy Systems ◽  
Economic Feasibility ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Levelized Cost Of Electricity ◽  
Renewable Energy Systems

Fluctuations in fossil fuel prices significantly affect the economies of countries, especially oil-importing countries, hence these countries are thoroughly investigating the increase in the utilization of renewable energy resources as it is abundant and locally available in all the countries despite challenges. Renewable energy systems (RES) such as solar and wind systems offer suitable alternatives for fossil fuels and could ensure the energy security of countries in a feasible way. Zimbabwe is one of the African countries that import a significant portion of its energy needs which endanger the energy security of the country. Several studies in the literature discussed the feasibility of different standalone and hybrid RES either with or without energy storage systems to either maximize the technical feasibility or the economic feasibility; however, none of the studies considered maximizing both feasibilities at the same time. Therefore, we present a techno-economic comparison of standalone wind and solar photovoltaic (PV) in addition to hybrid PV/wind systems based on maximizing the RES fraction with levelized cost of electricity (LCOE) being less than or equal to the local grid tariff where Gwanda, Zimbabwe, is the case study. The methodology suggested in this study could increase the utilization of renewable energy resources feasibly and at the same time increase the energy security of the country by decreasing dependency on imported energy. The results indicate that the PV/wind hybrid system does not only have the best economic benefits represented by the net present value (NPV) and the payback period (PBP), but also the best technical performance; where the maximum feasible size of the hybrid system-2 MW wind and 1 MW PV-has RES fraction of 65.07%, LCOE of 0.1 USD/kWh, PBP of 3.94 years, internal rate of return of 14.04% and NPV of 3.06 × 106 USD. Having similar systems for different cities in Zimbabwe will decrease the energy bill significantly and contribute toward the energy security of the country.

scholarly journals Technical Evaluation of a PV-Diesel Hybrid System with Energy Storage: Case Study in the Tapajós-Arapiuns Extractive Reserve, Amazon, Brazil

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2969
Author(s):  
Tatiane Silva Costa ◽  
Marcelo Gradella Villalva
Keyword(s):  
Community Services ◽  
Amazon Region ◽  
Attractive Alternative ◽  
Diesel Generator ◽  
Pv System ◽  
Hybrid Energy ◽  
Remote Areas ◽  
Extractive Reserve ◽  
Brazilian Amazon Region

In 2018 the number of people without access to electricity dropped to less than 1 billion. However, the difficulty of serving these people became higher, as the locations are in the most remote areas of the world. Brazil, for example, needs to bring electricity to around 1 million people who, in the vast majority, live within the Amazon region. In this way, hybrid energy systems (HESs) count as an attractive alternative for power generation, especially in remote areas. Therefore, this article analyzes a case study of a hybrid photovoltaic-diesel system installed in the Tapajós-Arapiuns Extractive Reserve in the Brazilian Amazon region. The studied plant is composed of a photovoltaic (PV) system, a lead-acid electrochemical battery bank, a diesel generator, and electro-electronic loads with highly variable demand throughout the year. The HOMER PRO software is used as the simulation tool. The results show that the load following dispatch strategy is the best option, with 85.6% of the load demand being supplied by PV energy and only 14.4% by the diesel generator set. As a result, the system is technically feasible to be replicated as a reliable energy source in other areas of the reserve to supply schools, public health places, and other community services.

scholarly journals Resource Assessment and Techno-Economic Analysis of a Grid-Connected Solar PV-Wind Hybrid System for Different Locations in Saudi Arabia

2018 ◽  
Vol 10 (10) ◽  
pp. 3690 ◽  
Author(s):  
Yahya Alharthi ◽  
Mahbube Siddiki ◽  
Ghulam Chaudhry
Keyword(s):  
Saudi Arabia ◽  
Renewable Energy ◽  
Hybrid System ◽  
Energy Demand ◽  
Power Plants ◽  
Meteorological Data ◽  
Renewable Energy Sources ◽  
Peak Load ◽  
Solar Pv ◽  
Renewable Energy Resources

The economic growth and demographic progression in Saudi Arabia increased spending on the development of conventional power plants to meet the national energy demand. The conventional generation and continued use of fossil fuels as the main source of electricity will raise the operational environmental impact of electricity generation. Therefore, using different renewable energy sources might be a solution to this issue. In this study, a grid-connected solar PV-wind hybrid energy system has been designed considering an average community load demand of 15,000 kWh/day and a peak load of 2395 kW. HOMER software is used to assess the potential of renewable energy resources and perform the technical and economic analyses of the grid-connected hybrid system. The meteorological data was collected from the Renewable Resources Atlas developed by the King Abdullah City of Atomic and Renewable Energy (KACARE). Four different cities in the Kingdom of Saudi Arabia, namely, the cities of Riyadh, Hafar Albatin, Sharurah, and Yanbu were selected to do the analyses. The simulation results show that the proposed system is economically and environmentally feasible at Yanbu city. The system at this city has the lowest net present cost (NPC) and levelized the cost of energy (LCOE), highest total energy that can be sold to the grid, as well as the lowest CO2 emissions due to a highly renewable energy penetration. This grid-connected hybrid system with the proposed configuration is applicable for similar meteorological and environmental conditions in the region, and around the world. Reduction of some greenhouse gasses as well as the reduction of energy costs are main contributors of this research.

scholarly journals Feasibility study of renewable energy resources and optimization of electrical hybrid energy systems: Case study for Islamic Azad University, South Tehran Branch, Iran

2017 ◽  
Vol 21 (1 Part A) ◽  
pp. 335-351 ◽  
Author(s):  
Farivar Fazelpour ◽  
Nima Soltani
Keyword(s):  
Renewable Energy ◽  
Solar Radiation ◽  
Hybrid Systems ◽  
Feasibility Study ◽  
Hybrid System ◽  
Fossil Fuels ◽  
Solar Irradiation ◽  
Renewable Energy Resources ◽  
Diesel Generator ◽  
Hourly Data

Renewable energies are increasingly seen as the best solution to a growing global population demanding affordable access to electricity while reducing the need for fossil fuels. Country of Iran has vast untapped solar, wind, geothermal and hydroelectric sources that hold the potential to meet domestic needs. Renewable energy is also essential to Iran as it will curb massive air pollution. In this paper economical and feasibility study of various hybrid systems are performed by using HOMER software model for supplying electricity to the Engineering Department of Islamic Azad University. For this study, annual electricity demand of the university is 1,174,935 kWh with a peak demand of about 331 kW, average wind speeds, based on hourly data during the period of eleven years (2000-2010), are between 3 to 5 m/s in all months of the year. For solar radiation, six models are evaluated to select the best model for estimation of the daily global solar radiation (GSR) on a horizontal surface in the study location. Among these six models, H/HO=a+b (S/S0)+ c(S/S0)2 is chosen as the most optimum model for estimating solar irradiation. The results indicate that among the three hybrid systems for fulfilling electrical energy needs, the Wind/Diesel/Battery hybrid system with 9 wind turbines (20 kW), one diesel generator (300 kW), 50 batteries, and 50 kW power converters with net present cost of $4,281,800 and cost of energy of 0.285 $/kWh is the most economically efficient hybrid system. (based on 2015 US dollar).

scholarly journals Experimental Analysis of Modified DC-P&O Technique with Arm Controller for a Stand-Alone 40 W PV System

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6169
Author(s):  
Ashish Kumar Singhal ◽  
Narendra Singh Beniwal ◽  
Khalid Almutairi ◽  
Joshuva Arockia Dhanraj ◽  
Ali Mostafaeipour ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Real Time ◽  
Renewable Energy Sources ◽  
Duty Ratio ◽  
Resistive Load ◽  
Renewable Energy Resources ◽  
Pv System ◽  
The Real ◽  
Fast Tracking ◽  
Pv Panel

The world is moving towards the generation of electricity with renewable energy sources (RES) due to the deterioration of the green environment and trying to replace non-renewable energy resources. The real-time results are achieved with the help of an arm controller, having good controller efficiency with the Waijung toolbox, compatible with MATLAB using STM32ST-link utility. In this paper, the authors are focused on areas such as easy to implement controller efficiency, and real-time solutions for modified direct-control perturbation & observation (DC-P&O) technique based on 32- bit ARM Cortex microcontroller (STM32F407VGT6) with embedded programming using Waijung blocksets, which offers very expected outcomes of the problem to make the stand-alone system efficient with fast-tracking. The observation setup is tested with a 40-watt photovoltaic (PV) panel with resistive load for achieving its stability. The designed algorithm enhances the efficiency of the controller by 84.48% for the real-time parameters of the PV panel at maximum power point (MPP) for a 57% duty ratio.

Optimum sizing and simulation of hybrid renewable energy system for remote area

2021 ◽  
pp. 0958305X2110301
Author(s):  
Animesh Masih ◽  
HK Verma
Keyword(s):  
Renewable Energy ◽  
Reliability Index ◽  
Energy System ◽  
Energy Resources ◽  
Total System ◽  
Renewable Energy Resources ◽  
Optimal Sizing ◽  
Remote Areas ◽  
Grasshopper Optimization Algorithm ◽  
Hybrid Renewable Energy

In current scenario, people tend to move towards outskirts and like to settle in places that are close to nature. But, due to urban lifestyle and to fulfill the basic needs, demand of electricity remains the same as in urban areas. This demand of electricity can be only fulfilled by using hybrid renewable energy resources, which is easily available in outskirts. Renewable energy resources are unreliable and more expensive. Researchers are working to make, it more reliable and economic in terms of utilization. This article proposes a metaheuristic grasshopper optimization algorithm (GOA) for the optimal sizing of hybrid PV/wind/battery energy system located in remote areas. The proposed algorithm finds the optimal sizing and configuration of remote village load demand that includes house electricity and agriculture. The optimization problem is solved by minimization of total system cost at a desirable level of loss of power supply’s reliability index (LPSRI). The results of GOA are compared with particle swarm optimization (PSO), genetic algorithm (GA) and hybrid optimization of multiple energy resources (HOMER) software. In addition, results are also validated by modeling and simulation of the hybrid energy system and its configurations at different weather conditions-based results. Hybrid PV/wind/battery is found as an optimal system at remote areas and sizing are[Formula: see text] with cost of energy (COE) (0.3473$/kWh) and loss of power supplies reliability index (LPSRI) (0%). It is clear from the results that GOA based methods are more efficient for selection of optimal energy system configuration as compared to others algorithms.

scholarly journals Potential and Feasibility Study of Hybrid Wind–Hydroelectric Power System with Water-Pumping Storage: Jordan as a Case Study

2020 ◽  
Vol 10 (9) ◽  
pp. 3332
Author(s):  
Mohammad Al-Addous ◽  
Sahil Al Hmidan ◽  
Mustafa Jaradat ◽  
Emil Alasis ◽  
Nesrine Barbana
Keyword(s):  
Renewable Energy ◽  
Feasibility Study ◽  
Hybrid System ◽  
Wind Farm ◽  
Storage System ◽  
Peak Load ◽  
Energy Systems ◽  
Cost Study ◽  
Renewable Energy Systems ◽  
Water Pumping

Periodic daily fluctuating demand for energy and power is a perceptible phenomenon, resulting in some moments of low demand for power and energy related to the huge energy comes from renewable energy systems, and some moments of peak load demand. This phenomenon, when combined with the non-stationary operation of huge capacity of renewable energy systems, results in no stability of voltage and frequency. To assure continuous network stability and to avoid energy losses from renewable energy systems that are subject to such control system, a hybrid system with energy–power storage in the form of pumped-hydro storage is considered the most suitable technically. This paper presents the design, modeling, analysis, and feasibility study of a hybrid wind and water-pumping storage system. The system was designed and analyzed for King Talal Dam (KTD), which is in Northern Jordan. The importance of this study is that it is directed mainly to Jordan and the Middle East and North Africa (MENA) region in general. The Jordanian renewable energy market is a promising arena that encourages developers, investors, engineers, and companies to develop and install pure renewable energy systems and renewable energy hybrid projects for the generation of electricity. The analysis of wind data is carried out using the “windfarm” software with 5.16 m/s as average wind speed. It is followed by the design of the hybrid system, which is simulated for a daily operation of 2–3 h as peak load hours. Based on the technical outcomes, cost study and feasibility analyses are carried out with Jordanian market prices. The total estimated annual energy production is 26,663,933 kWh from 10 MW wind farm and 5.2 MW pumping storage system. The aforementioned studies showed that a similar hybrid system is not always fully commercially feasible. However, a pure pumped-storage system proved to be technically feasible and assisting the grid. The whole project analysis determines that such a system boosts the operational stability of the grid, increases the penetration of renewable energy systems and reduces the energy import. In addition, 15,100,000 tons of CO2-equivalent is estimated as annual emissions reduction in this study.

Sign in / Sign up

Export Citation Format

Share Document