scholarly journals Laboratory Tests to Optimize the Milking Machine Settings with Air Inlet Teat Cups for Sheep and Goats

Dairy ◽  
2022 ◽  
Vol 3 (1) ◽  
pp. 29-46
Author(s):  
Shehadeh Kaskous

Milking machine design and performance are directly related to the milkability of sheep and goats, with the aim of milking quickly, completely and gently. This leads to an increase in the milk yield with improved quality, and the maintenance of healthy udders. The aim of this study was to carry out laboratory tests to determine the optimal level of vacuum, pulsation rate and pulsation ratio of new milking machines in high and low milk lines for sheep and goats. This study was conducted at the Department of Research and Development, Siliconform, Germany. For this purpose, different levels of vacuum (32, 34, 36, 38 and 40 kPa), milk jet (2, 2.5, 3 and 4 mm), milk line (high line and low line) and pulsation ratio (50:50 and 60:40) were used. First minute water flow (1st WF/kg) was used as an indicator for assessing the best combination in the milking machine. In addition, the cyclic vacuum fluctuation was measured in the inner chamber of the teat cup during the 1st WF/kg with the aid of a Vacuscope device. Statistical analysis was conducted using the mixed procedure in SAS. Our results show that the vacuum level, the milk jet and the pulsation ratio had a significant influence (p < 0.05) on the 1st WF/kg in the two milking machines for goats and sheep. In conclusion, the ideal conditions for milking goats with air inlet teat cups in the milking machine are a vacuum level of 36–38 kPa (low line) and 38–40 kPa (high line), a pulsation rate of 90 cycles/min and a pulsation ratio of 60:40, while the ideal conditions in the sheep milking machines are a vacuum level of 35–36 kPa (low line) and 36–38 kPa (high line), a pulsation rate of 120 cycles/min and a pulsation ratio of 60:40 or 50:50.

Animals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 40
Author(s):  
Gema Romero ◽  
Joel Bueso-Ródenas ◽  
Manuel Alejandro ◽  
Francisco Moya ◽  
José Ramón Díaz

The Murciano-Granadina goat breed has been described as a slow milking breed. As milking machine parameters can affect milk extraction in terms of yield and time employed, two experiments of one-month duration were performed with 88 goats in Latin square design to find the best combination of these parameters. One of them was carried out in a mid-line milking machine and one in a low-line milking machine. For each of them, two vacuum levels (36 and 40 kPa), two pulsation rates (90 and 120 cycles/min) and two pulsator ratios (50 and 60%) were used and milking efficiency, sanitary status of the mammary gland, milk cortisol, and teat end status were evaluated. Results showed that in milking machines installed in mid- and low-line, the use of 40 kPa system vacuum, 60% pulsator ratio and 90 or 120 cycles/min pulsation rate achieved optimum milking fractioning and efficiency. In the case of low-level milking machines, a similar combination with 36 kPa not only showed worse milking fractioning values, but also provided better values of teat end status and cortisol level.


Sign in / Sign up

Export Citation Format

Share Document