scholarly journals VGG19 Network Assisted Joint Segmentation and Classification of Lung Nodules in CT Images

Diagnostics ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2208
Author(s):  
Muhammad Attique Khan ◽  
Venkatesan Rajinikanth ◽  
Suresh Chandra Satapathy ◽  
David Taniar ◽  
Jnyana Ranjan Mohanty ◽  
...  
Keyword(s):  
Lung Nodule ◽  
Ct Images ◽  
Lung Nodules ◽  
Detection Accuracy ◽  
Learning Framework ◽  
Pet Ct ◽  
Nodule Mining ◽  
Serially Concatenated ◽  
Occurrence Matrix

Pulmonary nodule is one of the lung diseases and its early diagnosis and treatment are essential to cure the patient. This paper introduces a deep learning framework to support the automated detection of lung nodules in computed tomography (CT) images. The proposed framework employs VGG-SegNet supported nodule mining and pre-trained DL-based classification to support automated lung nodule detection. The classification of lung CT images is implemented using the attained deep features, and then these features are serially concatenated with the handcrafted features, such as the Grey Level Co-Occurrence Matrix (GLCM), Local-Binary-Pattern (LBP) and Pyramid Histogram of Oriented Gradients (PHOG) to enhance the disease detection accuracy. The images used for experiments are collected from the LIDC-IDRI and Lung-PET-CT-Dx datasets. The experimental results attained show that the VGG19 architecture with concatenated deep and handcrafted features can achieve an accuracy of 97.83% with the SVM-RBF classifier.

COVID-19 pneumonia diagnosis using a simple 2D deep learning framework with a single chest CT image (Preprint)

2020 ◽  
Author(s):  
Jinseok Lee
Keyword(s):  
Deep Learning ◽  
Diagnostic Performance ◽  
Ct Images ◽  
Chest Ct ◽  
University Hospital ◽  
Detection Accuracy ◽  
Ct Image ◽  
Test Dataset ◽  
Learning Framework ◽  
Testing Dataset

BACKGROUND The coronavirus disease (COVID-19) has explosively spread worldwide since the beginning of 2020. According to a multinational consensus statement from the Fleischner Society, computed tomography (CT) can be used as a relevant screening tool owing to its higher sensitivity for detecting early pneumonic changes. However, physicians are extremely busy fighting COVID-19 in this era of worldwide crisis. Thus, it is crucial to accelerate the development of an artificial intelligence (AI) diagnostic tool to support physicians. OBJECTIVE We aimed to quickly develop an AI technique to diagnose COVID-19 pneumonia and differentiate it from non-COVID pneumonia and non-pneumonia diseases on CT. METHODS A simple 2D deep learning framework, named fast-track COVID-19 classification network (FCONet), was developed to diagnose COVID-19 pneumonia based on a single chest CT image. FCONet was developed by transfer learning, using one of the four state-of-art pre-trained deep learning models (VGG16, ResNet50, InceptionV3, or Xception) as a backbone. For training and testing of FCONet, we collected 3,993 chest CT images of patients with COVID-19 pneumonia, other pneumonia, and non-pneumonia diseases from Wonkwang University Hospital, Chonnam National University Hospital, and the Italian Society of Medical and Interventional Radiology public database. These CT images were split into a training and a testing set at a ratio of 8:2. For the test dataset, the diagnostic performance to diagnose COVID-19 pneumonia was compared among the four pre-trained FCONet models. In addition, we tested the FCONet models on an additional external testing dataset extracted from the embedded low-quality chest CT images of COVID-19 pneumonia in recently published papers. RESULTS Of the four pre-trained models of FCONet, the ResNet50 showed excellent diagnostic performance (sensitivity 99.58%, specificity 100%, and accuracy 99.87%) and outperformed the other three pre-trained models in testing dataset. In additional external test dataset using low-quality CT images, the detection accuracy of the ResNet50 model was the highest (96.97%), followed by Xception, InceptionV3, and VGG16 (90.71%, 89.38%, and 87.12%, respectively). CONCLUSIONS The FCONet, a simple 2D deep learning framework based on a single chest CT image, provides excellent diagnostic performance in detecting COVID-19 pneumonia. Based on our testing dataset, the ResNet50-based FCONet might be the best model, as it outperformed other FCONet models based on VGG16, Xception, and InceptionV3.

scholarly journals Convolutional Neural Networks Promising in Lung Cancer T-Parameter Assessment on Baseline FDG-PET/CT

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Margarita Kirienko ◽  
Martina Sollini ◽  
Giorgia Silvestri ◽  
Serena Mognetti ◽  
Emanuele Voulaz ◽  
...  
Keyword(s):  
Lung Cancer ◽  
Fdg Pet ◽  
Area Under The Curve ◽  
Ct Images ◽  
Tnm System ◽  
Positron Emission ◽  
Pet Ct ◽  
Test Sets ◽  
Fdg Pet Ct

Aim. To develop an algorithm, based on convolutional neural network (CNN), for the classification of lung cancer lesions as T1-T2 or T3-T4 on staging fluorodeoxyglucose positron emission tomography (FDG-PET)/CT images. Methods. We retrospectively selected a cohort of 472 patients (divided in the training, validation, and test sets) submitted to staging FDG-PET/CT within 60 days before biopsy or surgery. TNM system seventh edition was used as reference. Postprocessing was performed to generate an adequate dataset. The input of CNNs was a bounding box on both PET and CT images, cropped around the lesion centre. The results were classified as Correct (concordance between reference and prediction) and Incorrect (discordance between reference and prediction). Accuracy (Correct/[Correct + Incorrect]), recall (Correctly predicted T3-T4/[all T3-T4]), and specificity (Correctly predicted T1-T2/[all T1-T2]), as commonly defined in deep learning models, were used to evaluate CNN performance. The area under the curve (AUC) was calculated for the final model. Results. The algorithm, composed of two networks (a “feature extractor” and a “classifier”), developed and tested achieved an accuracy, recall, specificity, and AUC of 87%, 69%, 69%, and 0.83; 86%, 77%, 70%, and 0.73; and 90%, 47%, 67%, and 0.68 in the training, validation, and test sets, respectively. Conclusion. We obtained proof of concept that CNNs can be used as a tool to assist in the staging of patients affected by lung cancer.

scholarly journals Application of Deep Learning in Lung Cancer Imaging Diagnosis

2022 ◽  
Vol 2022 ◽  
pp. 1-12
Author(s):  
Wenfa Jiang ◽  
Ganhua Zeng ◽  
Shuo Wang ◽  
Xiaofeng Wu ◽  
Chenyang Xu
Keyword(s):  
Lung Cancer ◽  
Computer Vision ◽  
Deep Learning ◽  
Malignant Tumors ◽  
Lung Nodule ◽  
Ct Images ◽  
Lung Nodules ◽  
X Rays ◽  
Imaging Diagnosis ◽  
Risk Of Cancer

Lung cancer is one of the malignant tumors with the highest fatality rate and nearest to our lives. It poses a great threat to human health and it mainly occurs in smokers. In our country, with the acceleration of industrialization, environmental pollution, and population aging, the cancer burden of lung cancer is increasing day by day. In the diagnosis of lung cancer, Computed Tomography (CT) images are a fairly common visualization tool. CT images visualize all tissues based on the absorption of X-rays. The diseased parts of the lung are collectively referred to as pulmonary nodules, the shape of nodules is different, and the risk of cancer will vary with the shape of nodules. Computer-aided diagnosis (CAD) is a very suitable method to solve this problem because the computer vision model can quickly scan every part of the CT image of the same quality for analysis and will not be affected by fatigue and emotion. The latest advances in deep learning enable computer vision models to help doctors diagnose various diseases, and in some cases, models have shown greater competitiveness than doctors. Based on the opportunity of technological development, the application of computer vision in medical imaging diagnosis of diseases has important research significance and value. In this paper, we have used a deep learning-based model on CT images of lung cancer and verified its effectiveness in the timely and accurate prediction of lungs disease. The proposed model has three parts: (i) detection of lung nodules, (ii) False Positive Reduction of the detected nodules to filter out “false nodules,” and (iii) classification of benign and malignant lung nodules. Furthermore, different network structures and loss functions were designed and realized at different stages. Additionally, to fine-tune the proposed deep learning-based mode and improve its accuracy in the detection Lung Nodule Detection, Noudule-Net, which is a detection network structure that combines U-Net and RPN, is proposed. Experimental observations have verified that the proposed scheme has exceptionally improved the expected accuracy and precision ratio of the underlined disease.

scholarly journals Hybrid Scheme for Automated Classification of Pulmonary Nodules Using PET/CT Images and Patient Information

2020 ◽  
Vol 10 (12) ◽  
pp. 4225
Author(s):  
Ayumi Yamada ◽  
Atsushi Teramoto ◽  
Masato Hoshi ◽  
Hiroshi Toyama ◽  
Kazuyoshi Imaizumi ◽  
...  
Keyword(s):  
Patient Information ◽  
Pulmonary Nodules ◽  
Ct Images ◽  
Machine Learning Algorithms ◽  
Automated Classification ◽  
Hybrid Scheme ◽  
Laboratory Test Results ◽  
Pet Ct ◽  
Functional Features

The classification of pulmonary nodules using computed tomography (CT) and positron emission tomography (PET)/CT is often a hard task for physicians. To this end, in our previous study, we developed an automated classification method using PET/CT images. In actual clinical practice, in addition to images, patient information (e.g., laboratory test results) is available and may be useful for automated classification. Here, we developed a hybrid scheme for automated classification of pulmonary nodules using these images and patient information. We collected 36 conventional CT images and PET/CT images of patients who underwent lung biopsy following bronchoscopy. Patient information was also collected. For classification, 25 shape and functional features were first extracted from the images. Benign and malignant nodules were identified using machine learning algorithms along with the images’ features and 17 patient-information-related features. In the leave-one-out cross-validation of our hybrid scheme, 94.4% of malignant nodules were identified correctly, and 77.7% of benign nodules were diagnosed correctly. The hybrid scheme performed better than that of our previous method that used only image features. These results indicate that the proposed hybrid scheme may improve the accuracy of malignancy analysis.

Overview of Computer Aided Detection and Computer Aided Diagnosis Systems for Lung Nodule Detection in Computed Tomography

2020 ◽  
Vol 16 (1) ◽  
pp. 16-26 ◽  
Author(s):  
Shabana Rasheed Ziyad ◽  
Venkatachalam Radha ◽  
Thavavel Vayyapuri
Keyword(s):  
Computed Tomography ◽  
Review Paper ◽  
Lung Nodule ◽  
Lung Nodules ◽  
Computer Aided Detection ◽  
Lung Nodule Detection ◽  
Nodule Detection ◽  
Computer Aided ◽  
Aided Diagnosis

Background: Lung cancer has become a major cause of cancer-related deaths. Detection of potentially malignant lung nodules is essential for the early diagnosis and clinical management of lung cancer. In clinical practice, the interpretation of Computed Tomography (CT) images is challenging for radiologists due to a large number of cases. There is a high rate of false positives in the manual findings. Computer aided detection system (CAD) and computer aided diagnosis systems (CADx) enhance the radiologists in accurately delineating the lung nodules. Objectives: The objective is to analyze CAD and CADx systems for lung nodule detection. It is necessary to review the various techniques followed in CAD and CADx systems proposed and implemented by various research persons. This study aims at analyzing the recent application of various concepts in computer science to each stage of CAD and CADx. Methods: This review paper is special in its own kind because it analyses the various techniques proposed by different eminent researchers in noise removal, contrast enhancement, thorax removal, lung segmentation, bone suppression, segmentation of trachea, classification of nodule and nonnodule and final classification of benign and malignant nodules. Results: A comparison of the performance of different techniques implemented by various researchers for the classification of nodule and non-nodule has been tabulated in the paper. Conclusion: The findings of this review paper will definitely prove to be useful to the research community working on automation of lung nodule detection.

Automated Lung Nodule Segmentation Using an Active Contour Model Based on PET/CT Images

2015 ◽  
Vol 12 (8) ◽  
pp. 1972-1976 ◽  
Author(s):  
Yan Qiang ◽  
Xiaohui Zhang ◽  
Guohua Ji ◽  
Juanjuan Zhao
Keyword(s):  
Active Contour ◽  
Active Contour Model ◽  
Lung Nodule ◽  
Ct Images ◽  
Model Based ◽  
Contour Model ◽  
Pet Ct

scholarly journals Performance analysis of texture characterization techniques for lung nodule classification

2022 ◽  
Vol 2161 (1) ◽  
pp. 012045
Author(s):  
Ishan Devdatt Kawathekar ◽  
Anu Shaju Areeckal
Keyword(s):  
Lung Cancer ◽  
Lung Nodule ◽  
Machine Learning Approach ◽  
Multi Class Classification ◽  
Semi Solid ◽  
Occurrence Matrix ◽  
Texture Characterization ◽  
Nodule Classification ◽  
Very High

Abstract Lung cancer ranks very high on a global index for cancer-related casualties. With early detection of lung cancer, the rate of survival increases to 80-90%. The standard method for diagnosing lung cancer from Computed Tomography (CT) scans is by manual annotation and detection of the cancerous regions, which is a tedious task for radiologists. This paper proposes a machine learning approach for multi-class classification of the lung nodules into solid, semi-solid, and Ground Glass Object texture classes. We employ feature extraction techniques, such as gray-level co-occurrence matrix, Gabor filters, and local binary pattern, and validate the performance on the LNDb dataset. The best performing classifier displays an accuracy of 94% and an F1-score of 0.92. The proposed approach was compared with related work using the same dataset. The results are promising, and the proposed method can be used to diagnose lung cancer accurately.

Sign in / Sign up

Export Citation Format

Share Document