scholarly journals A Quasi-Z-Source-Based Inductive Power Transfer System for Constant Current/Constant Voltage Charging Applications

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2900
Author(s):  
Vincenzo Castiglia ◽  
Nicola Campagna ◽  
Rosario Miceli ◽  
Fabio Viola ◽  
Frede Blaabjerg

This article proposes a quasi-Z-source (qZS)-based Inductive Power Transfer (IPT) system for Electric Vehicles (EVs) charging applications. The IPT systems use the magnetic field to transfer power between two coils wirelessly, achieving improved reliability, safety and less environmental impact. Compared to the conventional IPT system, the proposed qZS-IPT system simultaneously achieves DC/DC regulation and DC/AC conversion through a single-stage conversion, thus lowering the cost and complexity of the system. Moreover, the reliability of the system is improved thanks to the qZS network shoot-though immunity and the reduced number of switches. To ensure the battery efficient charging and long service life, the constant current/constant voltage (CC/CV) method is considered. With the proposed innovative modulation scheme, the qZS can easily change between buck and boost modes, respectively, lowering or increasing the secondary side current. A theoretical analysis is presented for system design. Simulation results based on a 25 kW (200 V/135 A) low duty EV charger are presented to verify the effectiveness of the proposed scheme. Experimental tests are performed on a 150 W scale-down prototype to validate the analysis and demonstrate the effectiveness of the proposed qZS-IPT system for CC/CV chargers.

Author(s):  
Sevilay Cetin ◽  
Veli Yenil

For electric vehicle (EV) battery chargers, inductive power transfer (IPT) has become popular day by day due to its features such as being safe, comfortable and weather proof. The constant current (CC) and the constant voltage (CV) charge control modes are important for high-efficiency charging and long-life use of Lithium-ion (Li-ion) batteries commonly used in EVs. However, IPT method requires a wide range of operating frequency in order to provide CC/CV charge control modes. In IPT applications, CC and CV charge control modes are mainly achieved with dc-dc circuits using compensation networks at the transmitter and receiver sides. In this study, performances of inductor-capacitor/series compensation and double-sided inductor-capacitor-capacitor compensation topologies are evaluated based on CC/CV charge control modes. The analytical evaluation is presented in terms of voltage and current regulations during the entire charge control period. Finally, presented analytical evaluation is confirmed with ANSYS software providing field-electric common simulation to predict real response of compensation topologies. In the simulation work, both compensation topologies are operated for the maximum 2.5 kW output power and at the 250 V-450 V output voltage range.


Sign in / Sign up

Export Citation Format

Share Document