scholarly journals Innovative Control Strategies for the Diagnosis of Injector Performance in an Internal Combustion Engine via Turbocharger Speed

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1420 ◽  
Author(s):  
Michele Becciani ◽  
Luca Romani ◽  
Giovanni Vichi ◽  
Alessandro Bianchini ◽  
Go Asai ◽  
...  
Keyword(s):  
Combustion Engine ◽  
Control Strategies ◽  
Integrated Control ◽  
Combustion Process ◽  
Engine Performance ◽  
Operating Conditions ◽  
Correct Operation ◽  
Control Units ◽  
The Right ◽  
High Level

In order to ensure a high level of performance and to comply with the increasingly severe limitations in terms of fuel consumption and pollution emissions, modern diesel engines need continuous monitoring of their operating conditions by their control units. With particular focus on turbocharged engines, which are presently the standard in a large number of applications, the use of the average and the instantaneous turbocharger speeds is thought to represent a valuable feedback of the engine behavior, especially for the identification of the cylinder-to-cylinder injection variations. The correct operation of the injectors and control of the injected fuel quantity allow the controller to ensure the right combustion process and maintain engine performance. In the present study, two different techniques are presented to fit this scope. The techniques are discussed and experimentally validated, leading to the definition of an integrated control strategy, which features the main benefits of the two, and is able to correctly detect the cylinder-to-cylinder injection variation and, consequently, properly correct the injection in each cylinder in order to balance the engine behavior. In addition, the possibility of detecting misfiring events was assessed.

Ethers and esters as alternative fuels for internal combustion engine: A review

2021 ◽  
pp. 146808742110464
Author(s):  
Yang Hua
Keyword(s):  
Alternative Fuels ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Engine Performance ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Future Research ◽  
Particulate Emissions ◽  
Ic Engine

Ether and ester fuels can work in the existing internal combustion (IC) engine with some important advantages. This work comprehensively reviews and summarizes the literatures on ether fuels represented by DME, DEE, DBE, DGM, and DMM, and ester fuels represented by DMC and biodiesel from three aspects of properties, production and engine application, so as to prove their feasibility and prospects as alternative fuels for compression ignition (CI) and spark ignition (SI) engines. These studies cover the effects of ether and ester fuels applied in the form of single fuel, mixed fuel, dual-fuel, and multi-fuel on engine performance, combustion and emission characteristics. The evaluation indexes mainly include torque, power, BTE, BSFC, ignition delay, heat release rate, pressure rise rate, combustion duration, exhaust gas temperature, CO, HC, NOx, PM, and smoke. The results show that ethers and esters have varying degrees of impact on engine performance, combustion and emissions. They can basically improve the thermal efficiency of the engine and reduce particulate emissions, but their effects on power, fuel consumption, combustion process, and CO, HC, and NOx emissions are uncertain, which is due to the coupling of operating conditions, fuel molecular structure, in-cylinder environment and application methods. By changing the injection strategy, adjusting the EGR rate, adopting a new combustion mode, adding improvers or synergizing multiple fuels, adverse effects can be avoided and the benefits of oxygenated fuel can be maximized. Finally, some challenges faced by alternative fuels and future research directions are analyzed.

Analysis of a 6 Cylinder Turbocharged HCCI Engine Using a Detailed Kinetic Mechanism

2002 ◽  
Author(s):  
Giuseppe Cantore ◽  
Luca Montorsi ◽  
Fabian Mauss ◽  
Per Amne´us ◽  
Olof Erlandsson ◽  
...  
Keyword(s):  
Combustion Engine ◽  
Control Strategies ◽  
Fluid Dynamic ◽  
Combustion Process ◽  
Operating Conditions ◽  
Engine Control ◽  
Gas Composition ◽  
Time Step ◽  
Hcci Engine ◽  
Power Code

When analyzing HCCI combustion engine behavior, the integration of experimental tests and numerical simulations is crucial. Investigations of possible engine control strategies as a function of the different operating conditions have to take the behavior of the whole HCCI engine into account, including the effects both of the combustion process and of complex devices. Therefore the numerical simulation code must be able both to model accurately the gas-dynamic of the system and to evaluate the combustion chemical kinetics. This paper focuses on the coupling between the commercial one-dimensional fluid-dynamic GT-Power Code and our in-house detailed chemical kinetic Ignition Code. An interface has been developed in order to exchange information between the two codes: the Ignition Code considers as boundary conditions the GT-Power Code values provided for the gas composition at IVC and the pressure and temperature at every time step and passes back to GT-Power the burnt fuel fraction and stores in an external file the in cylinder gas composition. Thus the whole engine cycle can be accurately simulated, estimating the interactions between the gas-dynamics phenomena along the intake and exhaust pipes and through the valves, and the chemical processes occurring during the closed valves period. This tool makes it possible to analyze the engine behavior under duty cycle operating conditions, and therefore it represents a useful support to the experimental measurements, reducing the number of tests required to assess the proper engine control strategies.

Performance Analysis of an Electric Turbocompounding System for a Hybrid Vehicle Diesel Engine

2015 ◽  
Author(s):  
Zhanming Ding ◽  
Weilin Zhuge ◽  
Yangjun Zhang ◽  
Yong Yin ◽  
Shuyong Zhang
Keyword(s):  
Diesel Engine ◽  
Waste Heat ◽  
Combustion Engine ◽  
Control Strategies ◽  
Full Range ◽  
Engine Performance ◽  
Driving Cycle ◽  
Operating Conditions ◽  
Full Load ◽  
Power Turbine

Waste heat recovery (WHR) is one of the main approaches to improve the internal combustion engine (ICE) overall efficiency and reduce emissions. The electric turbocompounding (ETC) technology is considered as a promising WHR technology for vehicle engines due to its compactness and light weight. In order to improve the overall fuel efficiency of the engine at practical operating conditions, the impacts of the implementation of the ETC system should be investigated not only at engine full load conditions, but also under practical driving cycles. In this paper, an ETC system was designed for a 4.75 L diesel engine, in which a power turbine was installed down-stream to the turbocharger turbine. A performance simulation model of the ETC engine was developed on the basis of the diesel engine model, which was validated against engine performance experimental data. The control strategies of the wastegate of turbocharger turbine, the wastegate of power turbine and the operating torque of generator were determined. The relative variation in BSFC was studied under full range of operating conditions, and results show that the maximum improvement of fuel economy is 6.7% at an engine speed of 1000 rpm and 70% of full load, in comparison with the baseline diesel engine. Main factors lead to the performance differences between the ETC engine and the baseline engine were analyzed. Furthermore, the performance of the ETC engine under the C-WTVC driving cycle was investigated. Results show that the implementation of the ETC system resulted in a 1.2% fuel consumption reduction under the C-WTVC driving cycle.

scholarly journals Thermal Characteristics Investigation of the Internal Combustion Engine Cooling-Combustion System Using Thermal Boundary Dynamic Coupling Method and Experimental Verification

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2127 ◽  
Author(s):  
Junhong Zhang ◽  
Zhexuan Xu ◽  
Jiewei Lin ◽  
Zefeng Lin ◽  
Jingchao Wang ◽  
...  
Keyword(s):  
Cooling System ◽  
Combustion Engine ◽  
Coupling Effect ◽  
Combustion Process ◽  
Thermal Characteristics ◽  
Engine Performance ◽  
Operating Conditions ◽  
Coolant Flow ◽  
Coupled Modeling ◽  
Engine Cooling

The engine cooling system must be able to match up with the stable operating conditions so as to guarantee the engine performance. On the working cycle level, however, the dynamic thermo-state of engines has not been considered in the cooling strategy. Besides, the frequent over-cooling boiling inside the gallery changes the cooling capacity constantly. It is necessary to study the coupling effect caused by the interaction of cooling flow and in-cylinder combustion so as to provide details of the dynamic control of cooling systems. To this end, this study develops a coupled modeling scheme of the cooling process considering the interaction of combustion and coolant flow. The global reaction mechanism is used for the combustion process and the multiphase flow method is employed to simulate the coolant flow considering the wall boiling and the interphase forces. The two sub-models exchange information of in-cylinder temperature, heat transfer coefficient, and wall temperature to achieve the coupled computation. The proposed modeling process is verified through the measured diesel engine power, in-cylinder pressure, and fire surface temperature of cylinder head. Then the effects of different cooling conditions on the cyclic engine performances are analyzed and discussed.

SIMULATION OF INTEGRATED CONTROL STRATEGIES FOR OROBANCHE SPP. BASED ON A LIFE CYCLE MODEL

2001 ◽  
Vol 37 (1) ◽  
pp. 37-51 ◽  
Author(s):  
E. KEBREAB ◽  
A. J. MURDOCH
Keyword(s):  
Seed Bank ◽  
Control Strategies ◽  
Soil Seed Bank ◽  
Integrated Control ◽  
Integrated Approach ◽  
Cultural Control ◽  
Computer Simulation Model ◽  
Weed Species ◽  
Hand Weeding ◽  
High Level

A computer simulation model was developed to investigate strategies for control of the parasitic weed species of Orobanche. The model makes use of data from published literature and predicts infestation levels in a dynamic and deterministic way. It is predicted that sustainable control of the parasite can only be achieved by reducing the soil seed bank to levels of 1000–2000 seeds m−2 and maintaining it at that level in subsequent years. When cultural control methods such as hand weeding, trap/catch cropping, delayed planting, resistant cultivars and solarization were considered individually, a relatively high level of effectiveness was required to contain the soil seed bank. An integrated approach with a selection of appropriate cultural methods is therefore recommended for further testing and validation in the field. The simulations demonstrate the importance of preventing new seeds entering the soil seed bank and that although reducing the soil seed bank may not increase yield for the first few years, it will ultimately increase production.

Control Systems for Automotive Vehicle Fuel Economy: A Literature Review

1981 ◽  
Vol 103 (3) ◽  
pp. 173-180 ◽  
Author(s):  
L. M. Sweet
Keyword(s):  
Control Systems ◽  
Combustion Engine ◽  
Control Strategies ◽  
Engine Performance ◽  
Type Systems ◽  
Open Loop ◽  
Feedback Systems ◽  
Fuel Flow ◽  
Loop Feedback ◽  
Hybrid Vehicle Control

This paper is a review of current research on applications of control systems and theory to achieve energy conservation in automotive vehicles. The development of internal combustion engine control systems that modulate fuel flow, air flow, ignition timing and duration, and exhaust gas recirculation is discussed. The relative advantages of physical and empirical models for engine performance are reviewed. Control strategies presented include optimized open-loop schedule type systems, closed-loop feedback systems, and adaptive controllers. The development of power train and hybrid vehicle control systems is presented, including controllers for both conventional transmissions and those employing flywheel energy storage.

A comprehensive evaluation of water injection in the diesel engine

2021 ◽  
pp. 146808742110442
Author(s):  
Sebastian Welscher ◽  
Mohammad Hossein Moradi ◽  
Antonino Vacca ◽  
Peter Bloch ◽  
Michael Grill ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engines ◽  
Comprehensive Evaluation ◽  
Combustion Engine ◽  
Water Injection ◽  
Combustion Process ◽  
Internal Combustion ◽  
Exhaust Emission ◽  
Pressure Trace ◽  
High Level

Due to increasing climate awareness and the introduction of much stricter exhaust emission legislation the internal combustion engine technology faces major challenges. Although the development and state of technology of internal combustion engines generally reached a very high level over the last years those need to be improved even more. Combining water injection with a diesel engine, therefore, seems to be the next logical step in developing a highly efficient drive train for future mobility. To investigate these potentials, a comprehensive evaluation of water injection on the diesel engine was carried out. This study covers >560 individual operating points on the test bench. The tests were carried out on a single-cylinder derived from a Euro 6d four-cylinder passenger car with the port water injection. Furthermore, a detailed pressure trace analysis (PTA) was performed to evaluate various aspects regarding combustion, emission, etc. The results show no significant effects of water injection on the combustion process, but great potential for NOx reduction. It has been shown that with the use of water injection at water-to-fuel rates of 25%, 50%, and 100%, NOx reduction without deterioration of soot levels can be achieved in 62%, 40%, and 20% of the experiments, respectively. Furthermore, water injection in combination with EGR offers additional reduction in NOx emissions.

scholarly journals Research on the Energy Efficiency Indicators of Transport Diesel Engines under Transient Operation Conditions

Pomorstvo ◽  
2018 ◽  
Vol 32 (2) ◽  
pp. 228-238 ◽  
Author(s):  
Sergejus LebedevasPaulius ◽  
Paulius Rapalis ◽  
Rima Mickevicienė
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Operating Conditions ◽  
Efficiency Coefficient ◽  
Operation Conditions ◽  
Power Increase ◽  
Control Units ◽  
Additional Equipment

In this study, we have investigated the efficiency of transport diesel engines CAT3512B-HD in transient braking and acceleration modes in 2M62M locomotives. A comparative analysis of the diesel engine performance has been performed at speeds of power increase and braking ranging from 4–5 kW/s to 17–18 kW/s. A decrease in the fuel economy occurred, and the main reason for it (compared with the steady-state operating condition at qcycl = idem) has been found to be the deterioration of the mechanical efficiency coefficient due to the loss of the additional equipment kinetic energy of the engine. The efficiency decreased by 3–3.5% under power increase operations and by 10–14% in the braking modes. The original methodology for the evaluation of the diesel engine parameters registered by the engine control units (ECU) in the engine operating conditions, mathematical modelling application AVL BOOST, and analytical summaries in artificial neural networks (ANNs) have been used. The errors in the obtained results have been 5–8% at a determination coefficient of 0.97–0.99.

Enhanced Splash Models for High Pressure Diesel Sprays

2006 ◽  
Author(s):  
L. Allocca ◽  
L. Andreassi ◽  
S. Ubertini
Keyword(s):  
Diesel Engines ◽  
Second Harmonic ◽  
Laser Sheet ◽  
Combustion Process ◽  
Numerical Data ◽  
Ccd Camera ◽  
Operating Conditions ◽  
Injection System ◽  
Correct Operation ◽  
Common Rail Injection System

Mixture preparation is a crucial aspect for the correct operation of modern DI Diesel engines as it greatly influences and alters the combustion process and therefore, the exhaust emissions. The complete comprehension of the spray impingement phenomenon is a quite complete task and to completely exploit the phenomenon a mixed numerical-experimental approach has to be considered. On the modeling side, several studies can be found in the scientific literature but only in the last years complete multidimensional modeling has been developed and applied to engine simulations. Among the models available in literature, in this paper, the models by Bai and Gosman [1] and by Lee et al. [2, 3] have been selected and implemented in the KIVA-3V code. On the experimental side, the behavior of a Diesel impinging spray emerging from a common rail injection system (injection pressures of 80 MPa and 120 MPa) has been analysed. The impinging spray has been lightened by a pulsed laser sheet generated from the second harmonic of a Nd-YAG laser. The images have been acquired by a CCD camera at different times from the start of injection (SOI). Digital image processing software has enabled to extract the characteristic parameters of the impinging spray with respect to different operating conditions. The comparison of numerical and experimental data shows that both models should be modified in order to allow a proper simulation of the splash phenomena in modern Diesel engines. Then the numerical data in terms of radial growth, height and shape of the splash cloud, as predicted by modified versions of the models are compared to the experimental ones. Differences among the models are highlighted and discussed.

scholarly journals Knock Intensity Distribution and a Stochastic Control Framework for Knock Control

2019 ◽  
Vol 141 (11) ◽  
Author(s):  
Mateos Kassa ◽  
Carrie Hall ◽  
Michael Pamminger ◽  
Thomas Wallner
Keyword(s):  
Lognormal Distribution ◽  
Control Strategies ◽  
Fuel Efficiency ◽  
Probabilistic Approach ◽  
Engine Performance ◽  
Operating Conditions ◽  
Control Approach ◽  
Spark Timing ◽  
Almost All ◽  
Knock Control

Abstract One of the main factors limiting the efficiency of spark-ignited (SI) engines is the occurrence of engine knock. In high temperature and high pressure in-cylinder conditions, the fuel–air mixture auto-ignites creating pressure shock waves in the cylinder. Knock can significantly damage the engine and hinder its performance; as such, conservative knock control strategies are generally implemented which avoid such operating conditions at the cost of lower thermal efficiencies. Significant improvements in the performance of conventional knock controllers are possible if the properties of the knock process are better characterized and exploited in knock controller designs. One of the methods undertaken to better characterize knocking instances is to employ a probabilistic approach, in which the likelihood of knock is derived from the statistical distribution of knock intensity (KI). In this paper, it is shown that KI values at a fixed operating point for single fuel and dual fuel engines are accurately described using a mixed lognormal distribution. The fitting accuracy is compared against those for a randomly generated mixed-lognormally distributed dataset, and shown to exceed a 95% accuracy threshold for almost all of the operating points tested. Additionally, this paper discusses a stochastic knock control approach that leverages the mixed lognormal distribution to adjust spark timing based on KI measurements. This more informed knock control strategy would allow for improvements in engine performance and fuel efficiency by minimizing knock occurrences.

Sign in / Sign up

Export Citation Format

Share Document