scholarly journals Opportunities in Measuring Multiscale Pore Structure of the Continental Shale of the Yanchang Formation, Ordos Basin, China

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5282
Author(s):  
Yanyan Li ◽  
Zhihong Zhang ◽  
Siyu Wei ◽  
Peng Yang ◽  
Yanjun Shang
Keyword(s):  
Pore Structure ◽  
Ordos Basin ◽  
Three Dimensional ◽  
Ct Scanning ◽  
Yanchang Formation ◽  
Storage Mechanism ◽  
Micro Scale ◽  
Nano Scale ◽  
Linear Relationships ◽  
The Ordos Basin

Pores of shale exhibit multiscale characteristics, and pore characterization is challenging due to the complexity of pore systems. Currently, research is focused on nano-submicron pores, but the structure of micrometer-scaled pores is not well understood. In this research, an investigation of the three-dimensional pore network of the Chang 7 shale in the Ordos Basin of China was conducted, in order to provide an insight into the full characteristics of pore systems. Nano-CT and micro-CT scanning technology was used to comprehensively delineate the pore structure at different scales, for further understanding the gas storage mechanism in shale rocks. Results show that the radius of micro-scale pores ranges from 1 to 15 μm, with an average of 2.8 μm, and pores with radii of 1–5 μm occupy approximately 90% of all the pores. For the nano-scale pores, the size ranges from 86 to 2679 nm, with an average of 152 nm, yet it has a rather concentrated distribution within 300 nm. The nano-scale pores constitute most of the pore amount in the shale, whereas the micro-scale pores constitute most of the pore volumes. Moreover, the results show that more than 70% of nano-scale pores in the Chang 7 shale are isolated pores, indicating that pore bodies formed in the shale reservoir have poor connectivity. Positive linear relationships between pore sizes and the number of pore throats at the micro-scale and nano-scale were both obtained, suggesting that larger pores tend to have better connectivity than smaller pores.

PORE STRUCTURE OF TRANSITIONAL SHALES IN THE ORDOS BASIN, NW CHINA: EFFECTS OF COMPOSITION ON GAS STORAGE MECHANISM

2017 ◽  
Author(s):  
Fengyang Xiong ◽  
◽  
Zhenxue Jiang ◽  
Mohammad Amin Amooie ◽  
Mohamad Reza Soltanian ◽  
...  
Keyword(s):  
Pore Structure ◽  
Ordos Basin ◽  
Gas Storage ◽  
Nw China ◽  
Storage Mechanism ◽  
The Ordos Basin

scholarly journals Multifractal Characteristics and Classification of Tight Sandstone Reservoirs: A Case Study from the Triassic Yanchang Formation, Ordos Basin, China

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2242 ◽  
Author(s):  
Zhihao Jiang ◽  
Zhiqiang Mao ◽  
Yujiang Shi ◽  
Daxing Wang
Keyword(s):  
Pore Structure ◽  
Ordos Basin ◽  
Type I ◽  
Tight Sandstone ◽  
Throat Radius ◽  
Yanchang Formation ◽  
Porosity And Permeability ◽  
Sandstone Reservoir ◽  
And Migration ◽  
Mercury Injection Capillary Pressure

Pore structure determines the ability of fluid storage and migration in rocks, expressed as porosity and permeability in the macroscopic aspects, and the pore throat radius in the microcosmic aspects. However, complex pore structure and strong heterogeneity make the accurate description of the tight sandstone reservoir of the Triassic Yanchang Formation, Ordos Basin, China still a problem. In this paper, mercury injection capillary pressure (MICP) parameters were applied to characterize the heterogeneity of pore structure, and three types of pore structure were divided, from high to low quality and defined as Type I, Type II and Type III, separately. Then, the multifractal analysis based on the MICP data was conducted to investigate the heterogeneity of the tight sandstone reservoir. The relationships among physical properties, MICP parameters and a series of multifractal parameters have been detailed analyzed. The results showed that four multifractal parameters, singularity exponent parameter (αmin), generalized dimension parameter (Dmax), information dimension (D1), and correlation dimension (D2) were in good correlations with the porosity and permeability, which can well characterize the pore structure and reservoir heterogeneity of the study area, while the others didn’t respond well. Meanwhile, there also were good relationships between these multifractal and MICP parameters.

scholarly journals Fractal Characterization of Nanopore Structure in Shale, Tight Sandstone and Mudstone from the Ordos Basin of China Using Nitrogen Adsorption

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 583 ◽  
Author(s):  
Xiaohong Li ◽  
Zhiyong Gao ◽  
Siyi Fang ◽  
Chao Ren ◽  
Kun Yang ◽  
...  
Keyword(s):  
Pore Structure ◽  
Pressure Range ◽  
Ordos Basin ◽  
Fractal Dimensions ◽  
Nitrogen Adsorption ◽  
Relative Pressure ◽  
Tight Sandstone ◽  
Porosity And Permeability ◽  
The Ordos Basin ◽  
Nanopore Structure

The characteristics of the nanopore structure in shale, tight sandstone and mudstone from the Ordos Basin of China were investigated by X-ray diffraction (XRD) analysis, porosity and permeability tests and low-pressure nitrogen adsorption experiments. Fractal dimensions D1 and D2 were determined from the low relative pressure range (0 < P/P0 < 0.4) and the high relative pressure range (0.4 < P/P0 < 1) of nitrogen adsorption data, respectively, using the Frenkel–Halsey–Hill (FHH) model. Relationships between pore structure parameters, mineral compositions and fractal dimensions were investigated. According to the International Union of Pure and Applied Chemistry (IUPAC) isotherm classification standard, the morphologies of the nitrogen adsorption curves of these 14 samples belong to the H2 and H3 types. Relationships among average pore diameter, Brunner-Emmet-Teller (BET) specific surface area, pore volume, porosity and permeability have been discussed. The heterogeneities of shale nanopore structures were verified, and nanopore size mainly concentrates under 30 nm. The average fractal dimension D1 of all the samples is 2.1187, varying from 1.1755 to 2.6122, and the average fractal dimension D2 is 2.4645, with the range from 2.2144 to 2.7362. Compared with D1, D2 has stronger relationships with pore structure parameters, and can be used for analyzing pore structure characteristics.

scholarly journals Soft-sediment Deformation Structures and Sand Body Architecture in the Chang 6 Oil Member of the Upper Triassic Yanchang Formation, Southwestern Ordos Basin, China

2019 ◽  
Vol 23 (2) ◽  
pp. 119-126 ◽  
Author(s):  
Qingshao Liang ◽  
Jingchun Tian ◽  
Feng Wang ◽  
Xiang Zhang
Keyword(s):  
Ordos Basin ◽  
Upper Triassic ◽  
Seismic Events ◽  
Soft Sediment ◽  
Delta Front ◽  
Yanchang Formation ◽  
Sand Body ◽  
Sediment Deformation ◽  
The Ordos Basin ◽  
Sand Bodies

Soft-sediment deformation (SSD) structures of the Upper Triassic Yanchang Formation are laterally widespread in the Ordos Basin. In the Huachi-Qingyang (H-Q) area of the Ordos Basin, the Chang6 oil member of the Upper Triassic Yanchang Formation is among the most significant Mesozoic oil-bearing strata. It is characterized by the development of reservoir sand bodies. During the depositional evolution of the Chang6 oil member, SSD structures induced by paleo-seismic events developed in the H-Q area in the middle of the basin. The SSD structures developed in the sand bodies of the Chang6 oil member are mainly ball-and-pillow structures, fold structures, sand dikes, irregular convolute stratifications and synsedimentary faults. The architecture of the sand bodies resulted from paleo-seismic events and gravity slumping and mainly include two types of structures: 1) SSD structures driven by paleo-seismic events with normal sedimentation (delta front sand body) (SN-SSD) and 2) SSD structures driven by paleo-seismic events with turbidites (formed by delta-front slumping and re-distribution due to seismic action) (ST-SSD). As a consequence, genetic models of the sand bodies formed by different sedimentation processes are established.

scholarly journals Seismic sedimentary characteristics and filling structure of the Upper Triassic Yanchang Formation, Ordos Basin, China

2020 ◽  
Vol 8 (2) ◽  
pp. T259-T274
Author(s):  
Congjun Feng ◽  
Mengsi Sun ◽  
Chiyang Liu ◽  
Xili Deng ◽  
Yuze Xue ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Ordos Basin ◽  
Yanchang Formation ◽  
Sedimentary Characteristics ◽  
Study Results ◽  
History Of ◽  
The Ordos Basin ◽  
Initial Depression ◽  
Depositional Age ◽  
Seismic Sections

Following the analysis of cores, outcrops, well log, and seismic sections, we have studied the seismic reflection configuration and depositional history of the hydrocarbon-rich Yanchang Formation in the Ordos Basin. We divided the seismic reflection configurations into five types: subparallel reflection, parallel reflection, tangential progradational reflection, shingled progradational reflection, and chaotic reflection. Based on our study results, we concluded that the slopes exhibit differences in the different regions of the Ordos Basin during the sedimentary period of the Yanchang Formation: The slope with the largest gradient of approximately 10°–20° occurred in the southwestern basin, followed by the northwestern basin (with a slope of approximately 1.6°–3.3°), but the slope was relatively gentle in the northeastern basin (approximately 0.8°–1.2°). We also found that the paleocurrent direction of the basin mainly includes two directions: The paleocurrent direction of the southwest region is 186°–259°, which indicates the provenance came from the southwestern region, whereas the paleocurrent direction of the northeast region is 10°–79°, which indicates that the provenance came from the northeastern region. In addition, the Ordos Basin was under isostatic subsidence as a whole during this period, and its sedimentary infilling evolution underwent five stages: the initial depression, intense depression, progradational filling, uplifting and denudation, as well as shrinking and extinction stages, just corresponding with the Chang 10-Chang 9, the Chang 8-Chang 7, the Chang 6-Chang 4+5, the Chang 3-Chang 2, and the Chang 1 depositional age, respectively.

Sign in / Sign up

Export Citation Format

Share Document