scholarly journals Design of a Step-Up DC–DC Converter for Standalone Photovoltaic Systems with Battery Energy Storages

Energies ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 44
Author(s):  
Yun-Gyeong Oh ◽  
Woo-Young Choi ◽  
Jung-Min Kwon

This paper proposes a step-up DC–DC converter for a power electronic circuit for standalone photovoltaic systems with battery energy storages. The proposed DC–DC converter effectively converts low DC battery voltage into high DC-link voltage. It operates with soft-switching characteristics, which can reduce switching power losses. The proposed converter operates without output voltage feedback, which simplifies its control design. The operation principle of the proposed converter was described, along with the overall system configuration. The experimental results were discussed for the 500-W prototype system using a 12-V lead-acid battery.

2017 ◽  
Vol 897 ◽  
pp. 571-574 ◽  
Author(s):  
Vidya Naidu ◽  
Sivaprasad Kotamraju

Silicon Carbide (SiC) based MOS devices are one of the promising devices for high temperature, high switching frequency and high power applications. In this paper, the static and dynamic characteristics of an asymmetric trench gate SiC IGBT with high-k dielectrics- HfO2 and ZrO2 are investigated. SiC IGBT with HfO2 and ZrO2 exhibited higher forward transconductance ratio and lower threshold voltage compared to conventionally used SiO2. In addition, lower switching power losses have been observed in the case of high-k dielectrics due to reduced tail current duration.


Author(s):  
Aditya Tiwary

New commercial power electronic controllers come to the market almost every day to help improve electronic circuit and system performance and efficiency. In DC–DC switching-mode converters, a simple and elegant hysteretic controller is used to regulate the basic buck, boost and buck–boost converters under slightly different configurations. In AC–DC converters, the input current shaping for power factor correction posts a constraint. But, several brilliant commercial controllers are demonstrated for boost and fly back converters to achieve almost perfect power factor correction. In this paper a comprehensive review of the various advanced optimization techniques used in power electronic controllers is presented.


Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 140 ◽  
Author(s):  
Ahmed Alzahrani ◽  
Hussain Alharthi ◽  
Muhammad Khalid

The problems associated with the deployment of intermittent, unpredictable and uncontrollable solar photovoltaics (PV) can be feasibly solved with battery energy storage systems (BESS), particularly in terms of optimizing the available capacity, increasing reliability and reducing system losses. Consequently, the degree of importance of BESS increases in proportion to the level of PV penetration. Nevertheless, the respective high cost of BESS imposes a huge concern and the need to establish a techno-economic solution. In this paper, we investigate the system losses and power quality issues associated with the high deployment of PV in a grid network and hence formulate BESS capacity optimization and placement methodology based on a genetic algorithm. The concept of the proposed methodology has been tested and validated on a standard IEEE 33 bus system. A brief stepwise analysis is presented to demonstrate the effectiveness and robustness of the proposed methodology in reducing the incremental system losses experienced with increased PV penetration. Furthermore, based on the proposed optimization objectives, a comparative study has also been performed to quantify the impact and effectiveness of aggregated and distributed placement of BESS. The results obtained exhibit a substantial reduction in system losses, particularly in the case of distributed BESS placement.


Sign in / Sign up

Export Citation Format

Share Document