scholarly journals Road Thermal Collector for Building Heating in South Europe: Numerical Modeling and Design of an Experimental Set-Up

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 430
Author(s):  
Antonino D’Amico ◽  
Giuseppina Ciulla ◽  
Alessandro Buscemi ◽  
Domenico Panno ◽  
Michele Zinzi ◽  
...  
Keyword(s):  
Mediterranean Area ◽  
High Energy ◽  
Radiative Properties ◽  
Small Scale ◽  
Experimental Area ◽  
Solar Thermal Collector ◽  
Dynamic Simulation Model ◽  
Visual Impact ◽  
Set Up ◽  
And Storage

The combination/integration of renewable energy and storage systems appears to have significant potential, achieving high-energy results with lower costs and emissions. One way to cover the thermal needs of a building is through solar energy and its seasonal storage in the ground. The SMARTEP project aims to create an experimental area that provides for the construction of a road solar thermal collector directly connected to a seasonal low-temperature geothermal storage with vertical boreholes. The storage can be connected to a ground-to-water heat pump for building acclimatization. This system will meet the requirements of visual impact and reduction of the occupied area. Nevertheless, several constraints related to the radiative properties of the surfaces and the lack of proper thermal insulation have to be addressed. The project includes the study of several configurations and suitable materials, the set-up of a dynamic simulation model and the construction of a small-scale road thermal collector. These phases allowed for an experimental area to be built. Thanks to careful investigation in the field, it will be possible to identify the characteristics and the best operation strategy to maximize the energy management of the whole system in the Mediterranean area.

scholarly journals Fast high-energy X-ray imaging for Severe Accidents experiments on the future PLINIUS-2 platform

2018 ◽  
Vol 170 ◽  
pp. 08003
Author(s):  
L. Berge ◽  
N. Estre ◽  
D. Tisseur ◽  
E. Payan ◽  
D. Eck ◽  
...  
Keyword(s):  
Large Scale ◽  
Spot Size ◽  
High Energy ◽  
Simulation Software ◽  
Small Scale ◽  
Noise Sources ◽  
X Ray ◽  
X Ray Imaging ◽  
The Future ◽  
Set Up

The future PLINIUS-2 platform of CEA Cadarache will be dedicated to the study of corium interactions in severe nuclear accidents, and will host innovative large-scale experiments. The Nuclear Measurement Laboratory of CEA Cadarache is in charge of real-time high-energy X-ray imaging set-ups, for the study of the corium-water and corium-sodium interaction, and of the corium stratification process. Imaging such large and high-density objects requires a 15 MeV linear electron accelerator coupled to a tungsten target creating a high-energy Bremsstrahlung X-ray flux, with corresponding dose rate about 100 Gy/min at 1 m. The signal is detected by phosphor screens coupled to high-framerate scientific CMOS cameras. The imaging set-up is established using an experimentally-validated home-made simulation software (MODHERATO). The code computes quantitative radiographic signals from the description of the source, object geometry and composition, detector, and geometrical configuration (magnification factor, etc.). It accounts for several noise sources (photonic and electronic noises, swank and readout noise), and for image blur due to the source spot-size and to the detector unsharpness. In a view to PLINIUS-2, the simulation has been improved to account for the scattered flux, which is expected to be significant. The paper presents the scattered flux calculation using the MCNP transport code, and its integration into the MODHERATO simulation. Then the validation of the improved simulation is presented, through confrontation to real measurement images taken on a small-scale equivalent set-up on the PLINIUS platform. Excellent agreement is achieved. This improved simulation is therefore being used to design the PLINIUS-2 imaging set-ups (source, detectors, cameras, etc.).

scholarly journals Numerical Analysis of a Mediterranean “Hurricane” over Southeastern Italy

2008 ◽  
Vol 136 (11) ◽  
pp. 4373-4397 ◽  
Author(s):  
Agata Moscatello ◽  
Mario Marcello Miglietta ◽  
Richard Rotunno
Keyword(s):  
Latent Heat ◽  
Wrf Model ◽  
Mediterranean Area ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Configuration Model ◽  
Small Scale ◽  
Central Mediterranean ◽  
Lee Vortex ◽  
Set Up

Abstract The presence of a subsynoptic-scale vortex over the Mediterranean Sea in southeastern Italy on 26 September 2006 has been recently documented by the authors. The transit of the cyclone over land allowed an accurate diagnosis of the structure of the vortex, based on radar and surface station data, showing that the cyclone had features similar to those observed in tropical cyclones. To investigate the cyclone in greater depth, numerical simulations have been performed using the Weather Research and Forecasting (WRF) model, set up with two domains, in a two-way-nested configuration. Model simulations are able to properly capture the timing and intensity of the small-scale cyclone. Moreover, the present simulated cyclone agrees with the observational analysis of this case, identifying in this small-scale depression the typical characteristics of a Mediterranean tropical-like cyclone. An analysis of the mechanisms responsible for the genesis, development, and maintenance of the cyclone has also been performed. Sensitivity experiments show that cyclogenesis on the lee side of the Atlas Mountains is responsible for the generation of the cyclone. Surface sensible and latent heat fluxes become important during the subsequent phase of development in which the lee-vortex shallow depression evolved as it moved toward the south of Sicily. During this phase, the latent heating, associated with convective motions triggered by a cold front entering the central Mediterranean area, was important for the intensification and contraction of the horizontal scale of the vortex. The small-scale cyclone subsequently deepened as it moved over the Ionian Sea and then maintained its intensity during its later transit over the Adriatic Sea; in this later stage, latent heat release continued to play a major role in amplifying and maintaining the vortex, while the importance of the surface fluxes diminished.

scholarly journals Experimental Characterization of an Alkaline Electrolyser and a Compression System for Hydrogen Production and Storage

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5347 ◽  
Author(s):  
Andrea Pietra ◽  
Marco Gianni ◽  
Nicola Zuliani ◽  
Stefano Malabotti ◽  
Rodolfo Taccani
Keyword(s):  
Renewable Energy ◽  
Hydrogen Production ◽  
Renewable Energy Sources ◽  
High Energy ◽  
High Energy Density ◽  
Small Scale ◽  
Experimental Plant ◽  
Experimental Characterization ◽  
And Storage

Storing renewable energy in chemicals, like hydrogen, can bring various benefits like high energy density, seasonal storability, possible cost reduction of the final product, and the potential to let renewable power penetrate other markets and to overcome their intermittent availability. In the last year’s production of this gas from renewable energy sources via electrolysis has grown its reputation as one feasible solution to satisfy future zero-emission energy demand. To extend the exploitation of Renewable Energy Source (RES), small-scale conversion plants seem to be an interesting option. In view of a possible widespread adoption of these types of plants, the authors intend to present the experimental characterization of a small-scale hydrogen production and storage plant. The considered experimental plant is based on an alkaline electrolyser and an air-driven hydrogen compression and storage system. The results show that the hydrogen production-specific consumption is, on average, 77 kWh/kgH2. The hydrogen compressor energy requirement is, on average, 15 kWh/kgH2 (data referred to the driving compressed air). The value is higher than data found in literature (4.4–9.3 kWh/kgH2), but the difference can be attributed to the small size of the considered compressor and the choice to limit the compression stages.

scholarly journals Modification of a Solar Thermal Collector to Promote Heat Transfer inside an Evacuated Tube Solar Thermal Absorber

2021 ◽  
Vol 11 (9) ◽  
pp. 4100
Author(s):  
Rasa Supankanok ◽  
Sukanpirom Sriwong ◽  
Phisan Ponpo ◽  
Wei Wu ◽  
Walairat Chandra-ambhorn ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Solar Thermal ◽  
Heat Transfer Fluid ◽  
Small Scale ◽  
Medium Temperature ◽  
Change Behavior ◽  
Set Up ◽  
Evacuated Tube ◽  
Heating Medium

Evacuated-tube solar collector (ETSC) is developed to achieve high heating medium temperature. Heat transfer fluid contained inside a copper heat pipe directly affects the heating medium temperature. A 10 mol% of ethylene-glycol in water is the heat transfer fluid in this system. The purpose of this study is to modify inner structure of the evacuated tube for promoting heat transfer through aluminum fin to the copper heat pipe by inserting stainless-steel scrubbers in the evacuated tube to increase heat conduction surface area. The experiment is set up to measure the temperature of heat transfer fluid at a heat pipe tip which is a heat exchange area between heat transfer fluid and heating medium. The vapor/ liquid equilibrium (VLE) theory is applied to investigate phase change behavior of the heat transfer fluid. Mathematical model validated with 6 experimental results is set up to investigate the performance of ETSC system and evaluate the feasibility of applying the modified ETSC in small-scale industries. The results indicate that the average temperature of heat transfer fluid in a modified tube increased to 160.32 °C which is higher than a standard tube by approximately 22 °C leading to the increase in its efficiency by 34.96%.

scholarly journals Overall Efficiency of On-Site Production and Storage of Solar Thermal Energy

2021 ◽  
Vol 13 (3) ◽  
pp. 1360
Author(s):  
Teodora M. Șoimoșan ◽  
Ligia M. Moga ◽  
Livia Anastasiu ◽  
Daniela L. Manea ◽  
Aurica Căzilă ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Thermal Energy ◽  
Urban Areas ◽  
Renewable Energy Sources ◽  
Multicriteria Analysis ◽  
High Energy ◽  
Solar Thermal ◽  
Solar Thermal Energy ◽  
The Impact ◽  
And Storage

Harnessing renewable energy sources (RES) using hybrid systems for buildings is almost a deontological obligation for engineers and researchers in the energy field, and increasing the percentage of renewables within the energy mix represents an important target. In crowded urban areas, on-site energy production and storage from renewables can be a real challenge from a technical point of view. The main objectives of this paper are quantification of the impact of the consumer’s profile on overall energy efficiency for on-site storage and final use of solar thermal energy, as well as developing a multicriteria assessment in order to provide a methodology for selection in prioritizing investments. Buildings with various consumption profiles lead to achieving different values of performance indicators in similar configurations of storage and energy supply. In this regard, an analysis of the consumption profile’s impact on overall energy efficiency, achieved in the case of on-site generation and storage of solar thermal energy, was performed. The obtained results validate the following conclusion: On-site integration of solar systems allowed the consumers to use RES at the desired coverage rates, while restricted by on-site available mounting areas for solar fields and thermal storage, under conditions of high energy efficiencies. In order to segregate the results and support optimal selection, a multicriteria analysis was carried out, having as the main criteria the energy efficiency indicators achieved by hybrid heating systems.

scholarly journals Learning in the Anthropocene

2021 ◽  
Vol 10 (6) ◽  
pp. 233
Author(s):  
Rasmus Karlsson
Keyword(s):  
Renewable Energy Sources ◽  
Local Level ◽  
High Energy ◽  
Small Scale ◽  
Optical Illusions ◽  
Global Trends ◽  
Energy Technologies ◽  
Climate Action ◽  
Enlightenment Project ◽  
Global Trajectory

While the precautionary principle may have offered a sound basis for managing environmental risk in the Holocene, the depth and width of the Anthropocene have made precaution increasingly untenable. Not only have many ecosystems already been damaged beyond natural recovery, achieving a sustainable long-term global trajectory now seem to require ever greater measures of proactionary risk-taking, in particular in relation to the growing need for climate engineering. At the same time, different optical illusions, arising from temporary emissions reductions due to the COVID-19 epidemic and the local deployment of seemingly “green” small-scale renewable energy sources, tend to obscure worsening global trends and reinforce political disinterest in developing high-energy technologies that would be more compatible with universal human development and worldwide ecological restoration. Yet, given the lack of feedback between the global and the local level, not to mention the role of culture and values in shaping perceptions of “sustainability”, the necessary learning may end up being both epistemologically and politically difficult. This paper explores the problem of finding indicators suitable for measuring progress towards meaningful climate action and the restoration of an ecologically vibrant planet. It is suggested that such indicators are essentially political as they reflect, not only different assessments of technological feasibility, but orientations towards the Enlightenment project.

scholarly journals Environmental controls on surf zone injuries on high-energy beaches

2019 ◽  
Vol 19 (10) ◽  
pp. 2183-2205 ◽  
Author(s):  
Bruno Castelle ◽  
Tim Scott ◽  
Rob Brander ◽  
Jak McCarroll ◽  
Arthur Robinet ◽  
...  
Keyword(s):  
Wave Height ◽  
Surf Zone ◽  
High Tide ◽  
High Energy ◽  
Water Levels ◽  
Small Scale ◽  
Beach Morphology ◽  
Environmental Controls ◽  
Flow Activity ◽  
Incident Waves

Abstract. The two primary causes of surf zone injuries (SZIs) worldwide, including fatal drowning and severe spinal injuries, are rip currents (rips) and shore-break waves. SZIs also result from surfing and bodyboarding activity. In this paper we address the primary environmental controls on SZIs along the high-energy meso–macro-tidal surf beach coast of southwestern France. A total of 2523 SZIs recorded by lifeguards over 186 sample days during the summers of 2007, 2009 and 2015 were combined with measured and/or hindcast weather, wave, tide, and beach morphology data. All SZIs occurred disproportionately on warm sunny days with low wind, likely because of increased beachgoer numbers and hazard exposure. Relationships were strongest for shore-break- and rip-related SZIs and weakest for surfing-related SZIs, the latter being also unaffected by tidal stage or range. Therefore, the analysis focused on bathers. More shore-break-related SZIs occur during shore-normal incident waves with average to below-average wave height (significant wave height, Hs = 0.75–1.5 m) and around higher water levels and large tide ranges when waves break on the steepest section of the beach. In contrast, more rip-related drownings occur near neap low tide, coinciding with maximised channel rip flow activity, under shore-normal incident waves with Hs >1.25 m and mean wave periods longer than 5 s. Additional drowning incidents occurred at spring high tide, presumably due to small-scale swash rips. The composite wave and tide parameters proposed by Scott et al. (2014) are key controlling factors determining SZI occurrence, although the risk ranges are not necessarily transferable to all sites. Summer beach and surf zone morphology is interannually highly variable, which is critical to SZI patterns. The upper beach slope can vary from 0.06 to 0.18 between summers, resulting in low and high shore-break-related SZIs, respectively. Summers with coast-wide highly (weakly) developed rip channels also result in widespread (scarce) rip-related drowning incidents. With life risk defined in terms of the number of people exposed to life threatening hazards at a beach, the ability of morphodynamic models to simulate primary beach morphology characteristics a few weeks or months in advance is therefore of paramount importance for predicting the primary surf zone life risks along this coast.

Numerical Study of Methane and Air Combustion Inside Heat-Recirculating Combustors

2013 ◽  
Author(s):  
Yanxia Li ◽  
Zhongliang Liu ◽  
Yan Wang ◽  
Jiaming Liu
Keyword(s):  
Gas Flow ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Central Area ◽  
Small Scale ◽  
Inlet Velocity ◽  
Strong Convection ◽  
Simulation Results ◽  
Lean Fuel ◽  
Set Up

A numerical model on methane/air combustion inside a small Swiss-roll combustor was set up to investigate the flame position of small-scale combustion. The simulation results show that the combustion flame could be maintained in the central area of the combustor only when the speed and equivalence ratio are all within a narrow and specific range. For high inlet velocity, the combustion could be sustained stably even with a very lean fuel and the flame always stayed at the first corner of reactant channel because of the strong convection heat transfer and preheating. For low inlet velocity, small amounts of fuel could combust stably in the central area of the combustor, because heat was appropriately transferred from the gas to the inlet mixture. Whereas, for the low premixed gas flow, only in certain conditions (Φ = 0.8 ～ 1.2 when ν0 = 1.0m/s, Φ = 1.0 when ν0 = 0.5m/s) the small-scale combustion could be maintained.

Sign in / Sign up

Export Citation Format

Share Document