scholarly journals Capacitor Voltage Balancing of a Grid-Tied, Cascaded Multilevel Converter with Binary Asymmetric Voltage Levels Using an Optimal One-Step-Ahead Switching-State Combination Approach

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 575
Author(s):  
Manuel Kuder ◽  
Anton Kersten ◽  
Jose-Luis Marques-Lopez ◽  
Julian Estaller ◽  
Johannes Buberger ◽  
...  
Keyword(s):  
System Response ◽  
Switching Frequency ◽  
Main Stage ◽  
Optimal Switching ◽  
Voltage Balancing ◽  
Control Approach ◽  
Capacitor Voltage ◽  
One Step ◽  
Voltage Feedback ◽  
Switching State

This paper presents a novel capacitor voltage balancing control approach for cascaded multilevel inverters with an arbitrary number of series-connected H-Bridge modules (floating capacitor modules) with asymmetric voltages, tiered by a factor of two (binary asymmetric). Using a nearest-level reference waveform, the balancing approach uses a one-step-ahead approach to find the optimal switching-state combination among all redundant switching-state combinations to balance the capacitor voltages as quickly as possible. Moreover, using a Lyapunov function candidate and considering LaSalle’s invariance principle, it is shown that an offline calculated trajectory of optimal switching-state combinations for each discrete output voltage level can be used to operate (asymptotically stable) the inverter without measuring any of the capacitor voltages, achieving a novel sensorless control as well. To verify the stability of the one-step-ahead balancing approach and its sensorless variant, a demonstrator inverter with 33 levels is operated in grid-tied mode. For the chosen 33-level converter, the NPC main-stage and the individual H-bridge modules are operated with an individual switching frequency of about 1 kHz and 2 kHz, respectively. The sensorless approach slightly reduced the dynamic system response and, furthermore, the current THD for the chosen operating point was increased from 3.28 to 4.58 in comparison with that of using the capacitor voltage feedback.

scholarly journals Capacitor voltage balancing control with reducing the average switching frequency in MMC

2019 ◽  
Vol 2019 (16) ◽  
pp. 2375-2380 ◽  
Author(s):  
Shunliang Wang ◽  
Tianqi Liu ◽  
XingChuan Huang ◽  
Yuexiao Yu
Keyword(s):  
Switching Frequency ◽  
Voltage Balancing ◽  
Capacitor Voltage ◽  
Balancing Control

scholarly journals Voltage Balancing Method on Expert System for 51-Level MMC in High Voltage Direct Current Transmission

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Yong Chen ◽  
Xu Zhang
Keyword(s):  
Expert System ◽  
High Voltage ◽  
Direct Current ◽  
Transmission System ◽  
Voltage Source ◽  
Switching Frequency ◽  
Voltage Balancing ◽  
Hvdc System ◽  
High Voltage Direct Current ◽  
Capacitor Voltage

The Modular Multilevel Converters (MMC) have been a spotlight for the high voltage and high power transmission systems. In the VSC-HVDC (High Voltage Direct Current based on Voltage Source Converter) transmission system, the energy of DC link is stored in the distributed capacitors, and the difference of capacitors in parameters and charge rates causes capacitor voltage balance which affects the safety and stability of HVDC system. A method of MMC based on the expert system for reducing the frequency of the submodules (SMs) of the IGBT switching frequency is proposed. Firstly, MMC with 51 levels for HVDC is designed. Secondly, the nearest level control (NLC) for 51-level MMC is introduced. Thirdly, a modified capacitor voltage balancing method based on expert system for MMC-based HVDC transmission system is proposed. Finally, a simulation platform for 51-level Modular Multilevel Converter is constructed by using MATLAB/SIMULINK. The results indicate that the strategy proposed reduces the switching frequency on the premise of keeping submodule voltage basically identical, which greatly reduces the power losses for MMC-HVDC system.

scholarly journals Current Balancing Control for Interleaved Half-Bridge Submodules in Modular Multilevel Converters

2021 ◽  
Author(s):  
Aleksandr Viatkin ◽  
Mattia Ricco ◽  
Riccardo Mandrioli ◽  
Tamas Kerekes ◽  
Remus Teodorescu ◽  
...  
Keyword(s):  
Dynamic Performance ◽  
Experimental Tests ◽  
Current Control ◽  
System Response ◽  
Loop Current ◽  
Multilevel Converters ◽  
Voltage Balancing ◽  
Modular Multilevel Converters ◽  
Capacitor Voltage ◽  
Balancing Control

This paper presents a closed-loop current balancing control for Modular Multilevel Converters with Interleaved half-bridge Sub-Modules (ISM-MMC). The new control loop solves the well-known problem of proper current balancing among interleaved half-bridge legs in each ISM-MMC submodule while preserving a simple and reliable structure. In addition to that, a novel capacitor voltage balancing strategy for MMCs is developed. The new algorithm contains main advantages of the classical capacitor voltage balancing methods while provides an opportunity to decouple two balancing tasks of ISM-MMC, namely capacitor voltage and interleaved legs current balancing. The proposed control methods feature good dynamic performance and are compliant with a digital processor's operational constraints. The effectiveness of the new balancing methods was verified during extensive numerical simulations and experimental tests on a laboratory prototype by the corresponding system response under the input/output characteristics variation and interleaved current control perturbation.

scholarly journals Research on an Auto-Optimized Capacitor Voltage Balancing Control Strategy of MMC SM for Renewable Energy HVDC Transmission System

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 104
Author(s):  
Jianfei Zhao ◽  
Changjiu Kong ◽  
Tingzhang Liu ◽  
Ruihua Li
Keyword(s):  
Control Strategy ◽  
Operating Efficiency ◽  
Switching Frequency ◽  
Sorting Algorithm ◽  
Switching Loss ◽  
Voltage Balancing ◽  
Hvdc Transmission ◽  
High Switching Frequency ◽  
Capacitor Voltage ◽  
Balancing Control

The Modular Multilevel Converter (MMC) is one of the most attractive converter topologies in the High Voltage Direct Current (HVDC) transmission field. The latest widely used sorting method has a low algorithm complexity. It can effectively balance the sub-module (SM) capacitor voltages, but it would cause relatively high switching frequency and power loss. Aiming at the problem that the sub-module (SM) capacitor voltage sorting algorithm has a large switching loss due to the high switching frequency of the device, this paper proposes an auto-optimized capacitor voltage balancing control strategy. Firstly, the topology and operation principle of MMC are analyzed. Secondly, a SM capacitor voltage control method based on the dynamic deviation threshold is proposed. Considering the switch switching state of the SM and the difference between the voltages of each SM, the algorithm can obtain the dynamic deviation valve using the closed-loop control. The method can avoid the unnecessary repeated switching of the Insulated Gate Bipolar Transistor (IGBT) under the premise of ensuring that the capacitance voltages of the SMs are basically the same, which effectively result in reducing the switching frequency of the MMC SM and reducing the switching loss, thereby improving the operating efficiency of the system. Finally aiming at the proposed control strategy, the simulation and experimental verification are carried out which shows that the proposed algorithm can better control the system voltage deviation, reduce the switching loss of the system and improve the stability of the system.

scholarly journals Current Balancing Control for Interleaved Half-Bridge Submodules in Modular Multilevel Converters

2021 ◽  
Author(s):  
Aleksandr Viatkin ◽  
Mattia Ricco ◽  
Riccardo Mandrioli ◽  
Tamas Kerekes ◽  
Remus Teodorescu ◽  
...  
Keyword(s):  
Dynamic Performance ◽  
Experimental Tests ◽  
Current Control ◽  
System Response ◽  
Loop Current ◽  
Multilevel Converters ◽  
Voltage Balancing ◽  
Modular Multilevel Converters ◽  
Capacitor Voltage ◽  
Balancing Control

This paper presents a closed-loop current balancing control for Modular Multilevel Converters with Interleaved half-bridge Sub-Modules (ISM-MMC). The new control loop solves the well-known problem of proper current balancing among interleaved half-bridge legs in each ISM-MMC submodule while preserving a simple and reliable structure. In addition to that, a novel capacitor voltage balancing strategy for MMCs is developed. The new algorithm contains main advantages of the classical capacitor voltage balancing methods while provides an opportunity to decouple two balancing tasks of ISM-MMC, namely capacitor voltage and interleaved legs current balancing. The proposed control methods feature good dynamic performance and are compliant with a digital processor's operational constraints. The effectiveness of the new balancing methods was verified during extensive numerical simulations and experimental tests on a laboratory prototype by the corresponding system response under the input/output characteristics variation and interleaved current control perturbation.

Sign in / Sign up

Export Citation Format

Share Document