scholarly journals Influence of Ripening on Polyphenolic Content, Degradative, and Browning Enzymes in Cantaloupe Varieties (C. Melo, L.)

Horticulturae ◽  
2021 ◽  
Vol 7 (11) ◽  
pp. 421
Author(s):  
Filomena Monica Vella ◽  
Roberto Calandrelli ◽  
Bruna Laratta

The biochemical changes that occur during the growth and ripening of fruit and vegetable tissues, especially for color and firmness, are the most important factors affecting the quality of fresh products. Cantaloupe (Cucumis melo, L.) is one of the main economically important fruits in the world and its quality parameters, e.g., sweetness, nutritional factors, and texture, influence consumer preferences. Hence, these two features, appearance and texture changes, were investigated in three different genotypes of netted melon, all characterized by an extended shelf life but with different ripening phases. In particular, in all melon cultivars, the cell wall-modifying enzymatic activities and indicators of softening as well as total polyphenols, ortho-diphenols, flavonoids, and tannins, and antioxidant activity were studied. One variety with excellent shelf-life displayed the best nutritional and healthy qualities, in the early stages of ripening, and the lowest degree of browning. The lytic enzyme activities were reduced in the initial stages and after they increased gradually until the overripe stage, with the same trend for all varieties under investigation. The antioxidant activities declined with increasing time of ripeness in all genotypes. The outcomes confirm that the activities of both classes examined, antioxidant and cell wall-modifying enzymes, may vary significantly during ripeness depending on the genotype, suggesting the involvement in determining the postharvest behavior of these fruits.

2003 ◽  
Vol 1 (1) ◽  
pp. 79 ◽  
Author(s):  
F. Ribas ◽  
M.J. Cabello ◽  
M.M. Moreno ◽  
A. Moreno ◽  
L. López-Bellido

The influence of different watering regimes and of potassium applications on the quality of the melon cultivar «Pielde Sapo» was studied over a two-year period (1995 and 1996). The statistical design was a split-plot with four replications,where irrigation was the main factor and applied potassium was the secondary factor. Water levels were determinedaccording to the watering needs (NRc) calculated on the basis of crop evapotranspiration. Four irrigationtreatments were tested: 1.25 NRc; 1.00 NRc; 0.75 NRc and 0.50 NRc. Two potassium treatments were applied: K0 (0UF) and K1 (375 UF K2O in 1995 and 2 L ha–1 of a commercial product for spraying 20% of K2O in 1996). The potassiumdoses tested did not significantly influence any of the quality parameters studied except for flesh firmness inthe placenta area in 1995. Both in 1995 and 1996, the water deficit significantly reduced fruit size and flesh thickness.The severe water restriction caused a strict decrease in the percentage of fruits with recorded weight above 2.5kg. However, the weight percentage of the placenta plus the seeds in relation to the whole fruit, and the sugar content,both increased significantly in water deficient treatments. In 1995, skin thickness decreased with less irrigation whileflesh firmness increased. Following quality concerns, and in order to obtain large fruits with appropriate levels ofsugar, it is advisable to provide water amounts that meet the crop’s watering needs


2000 ◽  
Vol 2000 ◽  
pp. 122-122
Author(s):  
M.J. Van Oeckel ◽  
N. Warnants ◽  
Ch.V. Boucqué

A Belgian study shows that the five most important meat attributes for the consumers are as follows: quality, taste, freshness, absence of hormones and healthiness (Verbeke and Viaene, 1999). This corroborates with the results of a French survey by Touraille (1992), who found that sensory properties and security aspects (hormones) of meat are of paramount importance for the consumer. It is important to direct pork production towards an acceptable product adapted to the consumer's demand. The objective of this study is to evaluate in which way and how strong the sensory quality parameters are influenced by different factors.


2020 ◽  
Vol 5 (86) ◽  
pp. 3-10
Author(s):  
V.G. Chernikov ◽  
◽  
R.A. Rostovtsev ◽  
N.A. Kudryavtsev ◽  
I.V. Uschapovsky ◽  
...  

The formation of fiber flax yield and quality parameters depends on many soil-climatic, breedinggenetic, as well as anthropogenic factors. The quality of flax fiber is a combination of a number of features and properties that depend on the varietal characteristics of plants, the conditions of their cultivation, technologies for harvesting and straw retting, as well as on the processing modes of raw materials. During plant vegetation (90-130 days) many factors such as soil conditions (pH 4.8-5.5, humus 1.8-2.5%, P2O5 and K2O – 150-200 and 100-200 mg/kg, respectively) and the area of plant nutrition (15-30 million seeds/ha), temperature regime (the sum of active temperatures 1000-1800ºC), water supplying (400-430 units of water mass to create 1 unit of dry matter) and insolation (the arrival of FAR during the growing season 20-25 kcal / cm²), contamination of weeds (more than 60 annual and perennial species) and pests (more than 200 types of fungal, bacterial and viral diseases), features of phytosanitary measures (more than 50 chemicals) and agrotechnologic manners (Federal Register of technologies for the production of crop products) have a great influence on the quality of flax raw materials and can be a limit factor. Environmentally hazardous pollution of air, water and soil - the main components for the production of fiber flax – strongly affects the yield and quality of flax products. The development of waste-free environmentally friendly technologies for the cultivation, harvesting and processing of flax is an urgent task of scientific support of the industry. The main environmental factors affecting the yield and quality of fiber flax are discussed in the article.


Author(s):  
Okukwe Obode ◽  
Oluwatoyin Okafor ◽  
Ochuko Erukainure ◽  
Atinuke Ajayi ◽  
Yewande Suberu ◽  
...  

Abstract: The protective effect of a developed drink from blends of selected fruits on the sperm quality of alloxan-induced diabetic rats was investigated.: Diabetes was intraperitoneally induced with alloxan; the formulated drink blend was orally administered 2.5 or 5 mL/day. Treatment lasted for 14 days and the rats were humanely sacrificed by cervical dislocation. The antioxidant status via assessment of reduced glutathione (GSH), catalase (CAT), superoxide dismutase (SOD) and lipid peroxidation (LPO) was carried out on the testis, while sperm cells were analyzed for sperm motility, counts and abnormality.: Induction of diabetes led to a significant (p<0.05) decrease in GSH level, elevated SOD and CAT activities, significant (p<0.05) decrease in the sperm quality parameters studied. However, treatment with the formulated drink led to a significant (p<0.05) reduction of LPO, SOD and CAT activities as well as increase in GSH level.: This study shows an improvement in testicular antioxidant activities and sperm qualities by single and double doses of the formulation, suggesting its protective potential against testicular toxicity in diabetic rats.


2021 ◽  
Author(s):  
Carlos Martín Enríquez-Castro ◽  
Manuel Pérez-Nafarrate ◽  
Jesús Enrique Gerardo Rodríguez

Ozone application is a non-thermal technology used in food preservation, which is a powerful oxidant agent used in water and air treatment specially in disinfection processes for agriculture and food industry. The objective of this revision work is to publicize ozone applications in the growing, harvest, and postharvest handling of fruit and vegetables (F & V) across México. Ozonated water by foliar spraying and irrigation were proved to be effective in the control of pathogens, bacteria, and bugs. The use of Ozone was effective to heighten quality parameters of F & V, such as color, flavor, and soluble solids in mango, sugarcane, citric fruits, and nopal, increasing shelf life of fresh products up to 15 days after harvesting. Several protocols mentioned to fulfill the requirements of the producer were developed by TRIO3. The methodology proposed and the designed equipment by the company suggest a wider approach of this green technology in agriculture.


2012 ◽  
Vol 706-709 ◽  
pp. 2146-2151
Author(s):  
Edyta Kardas

The quality of pig iron from the point of view of the customer, that is steel plant, is one of main factors affecting the quality and cost of steel production. Chemical composition and temperature of pig iron is among the parameters taking into consideration. The constancy of these parameters can result in steelmaking process on optimal level. The paper presents quantitative and quantitative analysis of pig iron produced in one of Polish steelworks. Analysis of the basic quality parameters of pig iron: the content of basic elements will be made. In the analysis statistical methods and quality tools will be applied.


2013 ◽  
Vol 749 ◽  
pp. 401-407 ◽  
Author(s):  
Xiang Ning Chen ◽  
Bin Jun Li ◽  
Ling Chuan Meng ◽  
Shuang Xi Fan

Once leafy vegetables are picked, metabolism and inoculating microbes affect the quality of the products badly. This paper included a brief introduction on the various factors affecting the freshness and shelf-life of leafy vegetables, with 3 types of treatments: antimicrobial gas or washing solutions (ozone, hydrogen peroxide, peroxyacetic acid, chlorine, electrolyzed oxidizing water, and silver solution), that are broadly applied on post-harvest leafy vegetables that help to reduce both spoilage microorganisms and pathogens.


Author(s):  
Proma Sen ◽  
Kazi N.S. Rafi ◽  
Zia Uddin ◽  
M. G. Aziz

The effect of edible coatings such as mustard, olive and soybean oils with 1.5% (w/v) sodium alginate (C6H7NaO6)n on the postharvest shelf life and the quality of Jara Lebu (Citrus medica) in 1.5% perforated LDP (low density polythene) bags at 30-32°C and 80-85% relative humidity were evaluated. The changes of physico-chemical attributes like percent weight loss, percent juice yield, pH, Total Soluble Solids (TSS), percent fruit decay, acidity and vitamin C were observed for 18 days of storage. After observing results we found that in controlling percent weight loss, percent juice yield, percent fruit decay, pH and TSS, mustard oil +1.5% sodium alginate coatings showed the best results whereas soybean oil with 1.5% sodium alginate coating showed reverse results. Concerning to the results of preserving acidity and vitamin C, the 1.5% sodium alginate and the mustard oil with 1.5% sodium alginate were found as the most effective coatings on the other hand olive oil plus 1.5% sodium alginate coatings showed slight efficiency in controlling the postharvest quality loss. Though the coating of lemon with mustard oil +1.5% sodium alginate and only 1.5% sodium alginate showed significantly better results with respect to sensory evaluation, the former one eventually performed the best in retaining most of the quality parameters of the samples. This study clearly indicates that mustard oil with 1.5% sodium alginate coating can be used as the best edible coating for preserving almost all the postharvest quality parameters as well as extending the shelf life of Jara Lebu.


2021 ◽  
Vol 11 (23) ◽  
pp. 11427
Author(s):  
Fernanda Cosme ◽  
Alice Vilela

The natural biopolymer chitin and its deacetylated derivative chitosan are abundant in nature. They are obtained from different sources, including the crustacean shells and the cell wall of fungi. Chitin and chitosan have various applications in the beverage industry, such as a flocculent to improve the clarification process, for the reduction of metals and contaminates, and to extend shelf-life. They are also used as material for the immobilization of microorganisms and enzymes, which allows the development of bioprocesses that preserve the quality of alcoholic and non-alcoholic beverages. Therefore, the main purpose of this overview is to consolidate some of the current practical applications of chitin and chitosan in the alcoholic and non-alcoholic beverage industry and to reveal new perspectives.


Sign in / Sign up

Export Citation Format

Share Document