scholarly journals 1,3-Dimethyl-3′,5-diphenyl-1,5-dihydro-2H,5′H-spiro[furo[2,3-d]pyrimidine-6,4′-isoxazole]-2,4,5′(3H)-trione

Molbank ◽  
10.3390/m1317 ◽  
2022 ◽  
Vol 2022 (1) ◽  
pp. M1317
Author(s):  
Yuliya E. Ryzhkova ◽  
Varvara M. Kalashnikova ◽  
Fedor V. Ryzhkov ◽  
Michail N. Elinson

Michael addition–halogenation–intramolecular ring-closing (MHIRC) reactions are processes in which a halogen atom as a leaving group can attach to substrates or reactants during the reaction, which then undergoes intramolecular ring closure. In this communication the MHIRC transformation of 4-benzylidene-3-phenylisoxazol-5(4H)-one and 1,3-dimethylbarbituric acid in the presence of N-bromosuccinimide and sodium acetate in EtOH at room temperature was carefully investigated to give novel 1,3-dimethyl-3′,5-diphenyl-1,5-dihydro-2H,5′H-spiro[furo[2,3-d]pyrimi- dine-6,4′-isoxazole]-2,4,5′(3H)-trione in a good yield. The structure of the new compound was confirmed by the results of elemental analysis as well as mass, nuclear magnetic resonance, and infrared spectroscopy.

1980 ◽  
Vol 58 (7) ◽  
pp. 723-726 ◽  
Author(s):  
Patricia F. Currie ◽  
J. Wilson Quail ◽  
John A. Weil

The reaction between 2,2-diphenyl-1-picrylhydrazyl and bromine in solution bas been studied at several temperatures. Despite the literature, reporting simple phenyl bromination products, a substantial yield of nitration products is observed. These have been identified by use of thin-layer chromatography, mass spectrometry, nuclear magnetic resonance, and elemental analysis. Among various products, 2-(p-nitrophenyl)-2-phenyl-1-picrylhydrazine is a major one at room temperature and above. It is thought that this compound is formed by reaction of DPPH with NO2, displaced from ortho nitro groups in the picryl rings by bromine. Yields were found to vary, depending on experimental conditions, with the temperature and the rate of bromine addition as primary controlling factors.


Molbank ◽  
10.3390/m1135 ◽  
2020 ◽  
Vol 2020 (2) ◽  
pp. M1135
Author(s):  
Yuliya E. Ryzhkova ◽  
Fedor V. Ryzhkov ◽  
Michail N. Elinson

In this communication, the electrochemically induced multicomponent transformation of 3-methylbenzaldehyde, 3-(4-bromophenyl)isoxazol-5(4H)-one and kojic acid in n-PrOH in an undivided cell in the presence of sodium bromide was carefully investigated to give 3-(4-bromophenyl)-4-{[3-hydroxy-6-(hydroxymethyl)-4-oxo-4H-pyran-2-yl](m-tolyl)methyl}isoxa- zol-5(2H)-one in good yield. The structure of the new compound was established by means of elemental analysis, mass-, nuclear magnetic resonance and infrared spectroscopy. Furthermore, its structure was determined and confirmed by X-ray analysis. The synthesized compound is a promising compound for different biomedical applications, and, in particular, for the regulation of inflammatory diseases, as shown by docking studies in this research.


2011 ◽  
Vol 181-182 ◽  
pp. 245-250
Author(s):  
Yuan Ming Huang

Soluble polypyrrole was obtained by naturally oxidizing pyrrole in air at room temperature for one to four years. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and ultraviolet-visible absorption spectroscopy were employed to characterize the chemical structures of the naturally oxidized polypyrrole. The electroluminescence from the naturally oxidized polypyrrole was recorded. The electroluminescence of the naturally oxidized polypyrrole was broad with its peak located at about 480 nm. Prototyped thin-film display panels were developed using the naturally oxidized polypyrrole as active medium.


Molbank ◽  
10.3390/m1308 ◽  
2021 ◽  
Vol 2022 (1) ◽  
pp. M1308
Author(s):  
Yuliya E. Ryzhkova ◽  
Oleg I. Maslov ◽  
Michail N. Elinson

Dimethyl sulfoxide (DMSO) is widely used as a solvent in organic synthesis and in pharmacology because of its low cost, stability, and non-toxicity. Multicomponent reactions are a powerful synthetic tool for the rapid and efficient construction of complicated molecular frameworks. In this communication, the multicomponent transformation of salicylaldehyde, malononitrile dimer, and dimethyl malonate in DMSO at room temperature was carefully investigated to give dimethyl 2-(2,4-diamino-3-cyano-5H-chromeno[2,3-b]pyridin-5-yl)malonate with good yield. The structure of the new compound was established by means of elemental analysis and mass, nuclear magnetic resonance, and infrared spectroscopy.


2014 ◽  
Vol 915-916 ◽  
pp. 713-716
Author(s):  
Qing Zhang ◽  
Jing Tian ◽  
Zhi Qi Cao ◽  
Ru Xia Xu ◽  
Zhen Zhen Sun ◽  
...  

In this investigation, Schiff bases aluminum complex was synthesized and used as the initiator in the polymerization of D,L-lactide. The aluminum complex was characterized by infrared spectroscopy (IR), and nuclear magnetic resonance spectroscopy (NMR). The influences of different factors, including reaction time, reaction temperature, and the ratio of D, L-lactide/Al3+ on the synthesis of polylactide were described. The results showed that Schiff bases aluminum complex could be successfully applied in the ring opening polymerization. The optimum condition of the ring opening polymerization of D,L-lactide, which included D,L-lactide/Al3+ (mol/mol) ratio of 250, reaction temperature of 120 °C, and reaction time of 16 hours.


Molecules ◽  
2018 ◽  
Vol 23 (12) ◽  
pp. 3079 ◽  
Author(s):  
Aleksey V. Zerov ◽  
Anna N. Kazakova ◽  
Irina A. Boyarskaya ◽  
Taras L. Panikorovskii ◽  
Vitalii V. Suslonov ◽  
...  

The TfOH-mediated reactions of 2,4-diaryl-1,1,1-trifluorobut-3-yn-2-oles (CF3-substituted diaryl propargyl alcohols) with arenes in CH2Cl2 afford 1,3-diaryl-1-CF3-indenes in yields up to 84%. This new process for synthesis of such CF3-indenes is complete at room temperature within one hour. The synthetic potential, scope, and limitations of this reaction were illustrated by more than 70 examples. The proposed reaction mechanism invokes the formation of highly reactive CF3-propargyl cation intermediates that can be trapped at the two mesomeric positions by the intermolecular nucleophilic attack of an arene partner with a subsequent intramolecular ring closure.


Sign in / Sign up

Export Citation Format

Share Document