scholarly journals Analysis of Selected Properties of Injection Moulded Sustainable Biocomposites from Poly(Butylene Succinate) and Wheat Bran

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7049
Author(s):  
Emil Sasimowski ◽  
Łukasz Majewski ◽  
Marta Grochowicz

The paper presents a procedure of the manufacturing and complex analysis of the properties of injection mouldings made of polymeric composites based on the poly(butylene succinate) (PBS) matrix with the addition of a natural filler in the form of wheat bran (WB). The scope of the research included measurements of processing shrinkage and density, analysis of the chemical structure, measurements of the thermal and thermo-mechanical properties (Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TG), Heat Deflection Temperature (HDT), and Vicat Softening Temperature (VST)), and measurements of the mechanical properties (hardness, impact strength, and static tensile test). The measurements were performed using design of experiment (DOE) methods, which made it possible to determine the investigated relationships in the form of polynomials and response surfaces. The mass content of the filler and the extruder screw speed during the production of the biocomposite granulate, which was used for the injection moulding of the test samples, constituted the variable factors adopted in the DOE. The study showed significant differences in the processing, thermal, and mechanical properties studied for individual systems of the DOE.

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5719
Author(s):  
Olga Olejnik ◽  
Anna Masek

The aim of the research was to obtain intelligent and eco-friendly packaging materials by incorporating innovative additives of plant origin. For this purpose, natural substances, including green tea extract (polyphenon 60) and caffeic acid, were added to two types of biodegradable thermoplastics (Ingeo™ Biopolymer PLA 4043D and Bioplast GS 2189). The main techniques used to assess the impact of phytocompounds on materials’ thermal properties were differential scanning calorimetry (DSC) and thermogravimetry (TGA), which confirmed the improved resistance to thermo-oxidation. Moreover, in order to assess the activity of applied antioxidants, the samples were aged using a UV aging chamber and a weathering device, then retested in terms of dynamic mechanical properties (DMA), colour changing, Vicat softening temperature, and chemical structure, as studied using FT-IR spectra analysis. The results revealed that different types of aging did not cause significant differences in thermo-mechanical properties and chemical structure of the samples with natural antioxidants but induced colour changing. The obtained results indicate that polylactide (PLA) and Bioplast GS 2189, the plasticizer free thermoplastic biomaterial containing polylactide and starch (referred to as sPLA in the present article), both with added caffeic acid and green tea extract, can be applied as smart and eco-friendly packaging materials. The composites reveal better thermo-oxidative stability with reference to pure materials and are able to change colour as a result of the oxidation process, especially after UV exposure, providing information about the degree of material degradation.


2009 ◽  
Vol 11 (3) ◽  
pp. 27-34 ◽  
Author(s):  
Aleksandra Ratajska ◽  
Wojciech Kulak ◽  
Artur Poeppel ◽  
Andreas Seyler ◽  
Zbigniew Roslaniec

Morphology and mechanical properties of polyamide 12 (PA12)/poly(vinylidene fluoride) (PVDF) blends The morphology, thermal and mechanical properties of polyamide 12 (PA12)/poly(vinylidene fluoride) (PVDF) blends were investigated. These polymers are engineering, semi-crystalline polymers which are reciprocally immiscible. Differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM) were used to characterize the polymeric materials. Mechanical properties were examined by static tensile test. The investigations demonstrate that blends with higher amount of PVDF, with the morphology of two co-continuous semicristalline phases, exhibit better mechanical properties. The blends with small content of PVDF and prepared by extrusion show the morphology of small separated domains of PVDF and full continuous PA phase. The morphology of these blends is different than the blends prepared by internal mixer and have better mechanical properties too. Thus they can be used in particular applications without a compatibilizing agent.


Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3196
Author(s):  
Marta Piątek-Hnat ◽  
Kuba Bomba ◽  
Jakub Pęksiński ◽  
Agnieszka Kozłowska ◽  
Jacek G. Sośnicki ◽  
...  

The purpose of this research was synthesis and electron beam modification of novel ester elastomers consisting of sugar alcohol–succinic acid block and butylene glycol–succinic acid block. Four different alditols were used in the synthesis—sorbitol, erythritol, xylitol, and glycerol. The materials were irradiated with doses of 50, 100, and 150 kGy in order to determine which dose is the most beneficial. As expected, irradiation of the materials has led to the cross-link density becoming higher and improvement of the mechanical properties. Additionally, the materials were also sterilized in the process. The great advantage of elastomers described in the paper is the fact that they do not need chemical cross-linking agents or sensitizers in order to undergo radiation modification. The following tests were performed on cross-linked poly(polyol succinate-co-butylene succinate) elastomers: quasi-static tensile test, determination of cross-link density, differential scanning calorimetry (DSC), dynamic thermomechanical analysis (DMTA), wettability (water contact angle), and Fourier transform infrared spectroscopy (FTIR). In order to confirm successful synthesis, prepolymers were analyzed by nuclear magnetic resonance spectroscopy (1H NMR and 13C NMR).


Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2179 ◽  
Author(s):  
Patricia Liminana ◽  
Luis Quiles-Carrillo ◽  
Teodomiro Boronat ◽  
Rafael Balart ◽  
Nestor Montanes

In this work poly(butylene succinate) (PBS) composites with varying loads of almond shell flour (ASF) in the 10–50 wt % were manufactured by extrusion and subsequent injection molding thus showing the feasibility of these combined manufacturing processes for composites up to 50 wt % ASF. A vegetable oil-derived compatibilizer, maleinized linseed oil (MLO), was used in PBS/ASF composites with a constant ASF to MLO (wt/wt) ratio of 10.0:1.5. Mechanical properties of PBS/ASF/MLO composites were obtained by standard tensile, hardness, and impact tests. The morphology of these composites was studied by field emission scanning electron microscopy—FESEM) and the main thermal properties were obtained by differential scanning calorimetry (DSC), dynamical mechanical-thermal analysis (DMTA), thermomechanical analysis (TMA), and thermogravimetry (TGA). As the ASF loading increased, a decrease in maximum tensile strength could be detected due to the presence of ASF filler and a plasticization effect provided by MLO which also provided a compatibilization effect due to the interaction of succinic anhydride polar groups contained in MLO with hydroxyl groups in both PBS (hydroxyl terminal groups) and ASF (hydroxyl groups in cellulose). FESEM study reveals a positive contribution of MLO to embed ASF particles into the PBS matrix, thus leading to balanced mechanical properties. Varying ASF loading on PBS composites represents an environmentally-friendly solution to broaden PBS uses at the industrial level while the use of MLO contributes to overcome or minimize the lack of interaction between the hydrophobic PBS matrix and the highly hydrophilic ASF filler.


2020 ◽  
Vol 40 (5) ◽  
pp. 409-414
Author(s):  
Tian-Xiang Jin ◽  
Miao-miao Wu ◽  
Jin-bo Ou-yang ◽  
Qin Zhang

AbstractPoly (butylene succinate-co-butylene-3-hydroxyphenylphosphinyl-propionate) (PBSH) was synthesized through polycondensation. Then, 4,4′-methylene diphenyl diisocyanate (MDI) was introduced into PBSH matrix by reactive blending. The chemical structure and properties of the blending products were investigated using Fourier Transform Infrared Spectroscopy (FT-IR), differential scanning calorimetry (DSC), limiting oxygen index (LOI) tests, thermogravimetric analysis (TGA), and vertical burning tests. The results proved that MDI can improve the mechanical properties and flame retardancy of PBSH. In addition, it was found that the crosslinking structure can reduce the hydrolysis rate of PBSH and effectively eliminate the melt-dripping of PBSH during combustion.


2019 ◽  
Vol 39 (1) ◽  
pp. 31-41 ◽  
Author(s):  
Aekartit Boonprasertpoh ◽  
Duanghathai Pentrakoon ◽  
Jirawut Junkasem

This study examines the effect of poly(butylene adipate- co-terephthalate) (PBAT) content on the physical, morphological, and mechanical properties of poly(butylene succinate) (PBS)/PBAT foam. A compression molding technique was used to prepare the PBS/PBAT foam using the chemical blowing agent azodicarbonamide and the cross-linking agent dicumyl peroxide. The chemical structure and morphological properties of PBS/PBAT foam were examined via Fourier transform infrared and scanning electron microscopy techniques, respectively, whereas tensile and flexural properties were investigated using a universal testing machine. The results reveal that the incorporation of PBAT barely enhances the viscosity of the PBS/PBAT blend, producing only minor changes in the average cell size of PBS/PBAT foam. However, increasing the PBAT content contributes to a relatively significant improvement in the flexibility and toughness of PBS/PBAT foam, where a decrease in Young’s modulus and tensile strength of the PBS/PBAT foam is observed compared with those of the PBS foam. Similar behavior to the tensile results is noticed for the flexural properties of the neat and PBS/PBAT foams.


2021 ◽  
Vol 2 (2) ◽  
pp. 71
Author(s):  
Sandra Rojas-Lema ◽  
Juan Ivorra-Martinez ◽  
Jaume Gomez-Caturla ◽  
Rafael Balart ◽  
Daniel Garcia-Garcia

<p class="JARTEAbstract">In this study was analyzed the effect of three different compatibilizers polyethylene-graft-maleic anhydride (PE-g-MA), unmodified halloysite nanotubes (HNTs), and HNTs treated by silanization with (3-glycidyloxypropyl) trimethoxysilane (GLYMO) (silanized HNTs) in blends of bio-based high-density polyethylene (bioPE) and poly(butylene succinate) (PBS) with a weight ratio of (70/30). Each compatibilizer was added in a proportion of (3 phr regarding PBS). Standard samples were obtained by extrusion and subsequent injection molding. The analyzes of the samples were performed by mechanical tests, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), field emission scanning electron microscopy (FESEM), and wettability (θ<sub>w</sub>). Results suggest that the addition of modified HNTs (silanized HNTs) allowed to obtain better properties than samples compatibilized with unmodified HNTs and PE-g-MA, due to it contributes with the improvement in mechanical properties regarding bioPE/PBS blend, for instance, the tensile modulus and elongation at break increase about 8% and 13%, respectively. In addition, it was determined through FESEM images and that silanized HNTs particles were better dispersed over the matrix, which in fact contribute to the enhance in mechanical properties. TGA showed that silanized HNTs delay the degradation temperature regarding the uncompatibilized blend. While DMTA indicated the reduction in the mobility of the chains in samples with unmodified and modified HNTs. Therefore, it was successfully obtained compatibilized bioPE/PBS blends, which constitutes an interesting option to develop new sustainable polymers.</p>


Polymers ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 766 ◽  
Author(s):  
Dániel Vadas ◽  
Dávid Kmetykó ◽  
György Marosi ◽  
Katalin Bocz

The aim of our research was to produce poly(lactic acid) (PLA) fibres with diameters in the micrometer size range, serving as the reinforcing phase in self-reinforced (SR) PLA composites. Nonwoven PLA mats were manufactured by solvent-free melt-blowing technology. Three types of PLA differing in d-lactide content were processed with a productivity as high as 36 g/h. The crystallinity of the PLA microfibres was enhanced by thermal annealing. A 2–3-fold increase in the degree of crystallinity was obtained, as measured by differential scanning calorimetry (DSC). Fibre diameters between 2–14 µm were revealed by scanning electron microscopy (SEM). Static tensile tests were performed on the nonwoven mats, showing the reduced moduli of the annealed fibres due the amorphous relaxation. The PLA mats were processed via the hot compaction technique and formed into SR–PLA composites. The morphological and mechanical properties of the obtained microstructural composites were comprehensively studied. Composites prepared from annealed, thermally more stable PLA nonwoven mats showed superior mechanical properties; the tensile strength improved by 47% due to the higher residual fibre content.


2013 ◽  
Vol 457-458 ◽  
pp. 108-111
Author(s):  
Chun Na Cui ◽  
Ji Tao Huang

Zinc oxide/poly (butylene succinate) composite (ZnO/PBS) were performed by aging test of 1008h. The chemical structure and crystallinity of the materials were characterized by fourier transform infrared spectroscopy and X-ray diffraction, and the aging properties of composite were studied by mechanical properties. The results showed that: the scale of characteristic functional groups had some change. And any of the reciprocal actions or effects, that can occur in composite molecule. The crystallinity of composite had reduced from 26.13% to 15.56% after aging. Mechanical properties of materials reduced gradually in aging, and reduced extent of ZnO/PBS composite was less than that of PBS.


Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2004 ◽  
Author(s):  
Zhixin Zhao ◽  
Bei Lei ◽  
Wenhao Du ◽  
Xi Zhang

1-butyl-3-methylimidazole chloride ((BMIM) Cl) modified starch/poly (butylene succinate) (PBS) blends with different anions of inorganic salts were prepared by HAAKE mixer. The compatibility and thermal behaviors including crystallinity, crystallization and melting temperature, thermal stability and mechanical properties were systematically investigated by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The results show that inorganic salts can produce a strong interaction with starch/PBS blends, which can improve the mechanical properties of starch/PBS blends, enhance the mechanical strength and elongation at break of starch/PBS blends, meanwhile, the thermal stability of starch/PBS blends decreased. The SEM images reveal that the compatibility of starch/PBS become better with the increase of inorganic salts. The melting and crystallization absorption peaks in the DSC curves show that the melting enthalpy (ΔHm), crystallinity (Xc), and crystallization temperature (Tc) of the blends decrease and the cold crystallization temperature (Tcc) increase when inorganic salts is added. Moreover, inorganic salts with smaller anionic radius have much better effects on the starch/PBS blends plasticized with ((BMIM)Cl).


Sign in / Sign up

Export Citation Format

Share Document