scholarly journals Seismic Analysis and Design of Composite Shear Wall with Stiffened Steel Plate and Infilled Concrete

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 182
Author(s):  
Ke Wang ◽  
Wenyuan Zhang ◽  
Yong Chen ◽  
Yukun Ding
Keyword(s):  
Ultimate Strength ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
Vertical Force ◽  
Composite Shear Wall ◽  
Strength Capacity ◽  
Composite Shear ◽  
Stiffened Steel ◽  
The Web

Several experiments are conducted to investigate the seismic behavior of composite shear walls because of their advantages compared to traditional reinforced concrete (RC) walls. However, the numerical studies are limited due to the complexities for the steel and concrete behaviors and their interaction. This paper presents a numerical study of composite shear walls with stiffened steel plates and infilled concrete (CWSC) using ABAQUS. The mechanical mechanisms of the web plate and concrete are studied. FE models are used to conduct parametric analysis to study the law of parameters on the seismic behaviour. The finite element (FE) model shows good agreement with the test results, including the hysteresis curves, failure phenomenon, ultimate strength, initial stiffness, and ductility. The web plate and concrete are the main components to resist lateral force. The web plate is found to contribute between 55% and 85% of the lateral force of wall. The corner of web plate mainly resists the vertical force, and the rest of web plate resists shear force. The concrete is separated into several columns by stiffened plates, each of which is independent and resisted vertical force. The wall thickness, steel ratio, and shear span ratio have the greatest influence on ultimate bearing capacity and elastic stiffness. The shear span ratio and axial compression ratio have the greatest influence on ductility. The test and analytical results are used to propose formulas to evaluate the ultimate strength capacity and stiffness of the composite shear wall under cyclic loading. The formulas could well predict the ultimate strength capacity reported in the literature.

Seismic Research and Development of Steel Plate Concrete Composite Shear Wall

2012 ◽  
Vol 238 ◽  
pp. 640-642
Author(s):  
Ya Bin Yang
Keyword(s):  
Seismic Performance ◽  
Steel Plate ◽  
Rapid Development ◽  
Engineering Application ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
High Rise ◽  
Composite Shear Wall ◽  
Composite Shear

Shear wall is the main component that resists the lateral force for high-rise buildings. With the rapid development of high-rise buildings, especially the super high-rise buildings, requirements for seismic performance of shear walls have become more sophisticated. The steel plate concrete composite shear wall shows good seismic performance. It has made rapid development through the research of seismic performance in the way of seismic design to the practical engineering application of steel plate concrete composite shear wall. Recent research situation and prospect of composite shear wall around the world have been introduced in this paper.

Bearing capacity of composite shear wall incorporating a concrete-filled steel tube boundary and column-type reinforced wall

2020 ◽  
Vol 23 (10) ◽  
pp. 2188-2203
Author(s):  
Zhao Nannan ◽  
Wang Yaohong ◽  
Han qing ◽  
Su Hao
Keyword(s):  
Bearing Capacity ◽  
Residual Deformation ◽  
Shear Walls ◽  
Shear Wall ◽  
Steel Tube ◽  
Concrete Filled Steel Tube ◽  
Composite Shear Wall ◽  
Boundary Shear ◽  
Column Type ◽  
Composite Shear

Composite shear walls are widely used in high-rise buildings because of their high bearing capacity. To improve the bearing capacity of ordinary shear walls, restraining elements are usually installed at both boundaries or within the wall body. In this article, two different restraining elements, namely, a rectangular steel tube and a column-type reinforcement (the whole wall body was restrained by segmented stirrups and tied by diagonal bars), were applied to the boundary frame and wall body of the shear wall either jointly or separately. A new type of steel-concrete composite shear wall, referred to as a composite shear wall incorporating a concrete-filled steel tube boundary and column-type reinforced wall, was proposed. In addition, three specimens with different restraining elements, namely, a column-type reinforced shear wall, a concrete-filled steel tube boundary shear wall and an ordinary reinforced concrete shear wall, were presented for comparison. The influences of the two different restraining elements on the seismic performance and bearing capacity of the shear walls were analyzed from four perspectives of failure mode, hysteresis behavior, stiffness and residual deformation, and the equivalent lateral pressures of the two restraining elements were calculated. Based on the plane-section assumption, expressions for the crack, yield, peak and ultimate bearing capacities were derived, and the effects of the two restraining elements on the peak and ultimate bearing capacities were considered. The results show that these two restraining elements significantly improved the bearing capacity of the shear wall specimens, and the concrete-filled steel tube restraining element was more effective than the column-type reinforced restraining element. Finally, the calculated values of the bearing capacity of the four different restraining elements of the shear wall specimens proposed in this article were in good agreement with the experimental values.

scholarly journals Design of Composite Shear Wall Encased with Vertical Steel Profiles

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
P. P. Phadnis ◽  
V. V. Karjinni
Keyword(s):  
Design Procedure ◽  
Shear Walls ◽  
Boundary Elements ◽  
Shear Wall ◽  
Good Alternative ◽  
Eurocode 8 ◽  
Structural Walls ◽  
Composite Columns ◽  
Composite Shear Wall ◽  
Composite Shear

The concept of steel-concrete composite shear wall is introduced due to the benefits achieved by integrating both the materials. These are structural walls, where steel profiles are encased at the boundary elements. Due to their higher lateral strength and stiffness, they offer a good alternative to improve earthquake resistance over conventional reinforced concrete shear walls in medium and high-rise buildings. Current literature shows that, design procedure of such composite shear walls is not addressed in developing country codes. Hence, a design of steel-concrete composite shear wall is proposed in the present paper on the basis of existing theory and with the help of standard codes. The web portion of shear wall has to be designed as per provisions of Eurocode 8. For the design of composite boundary elements, design norms of composite columns are followed. Also the design of shear stud connectors is adopted according to Eurocode 4.

The Statement of Research Progress in Embedded Steel Plate Shear Wall

2014 ◽  
Vol 638-640 ◽  
pp. 287-291
Author(s):  
Hai Xia Zhang ◽  
Qi Peng ◽  
Li Xuan Zhao
Keyword(s):  
Steel Plate ◽  
Rapid Development ◽  
Shear Walls ◽  
Shear Wall ◽  
Lateral Force ◽  
Research Progress ◽  
Steel Plate Shear Wall ◽  
High Rise ◽  
Main Component ◽  
Stiffened Steel

Shear wall is the main component that resists the lateral force for high-rise buildings. With the rapid development of high-rise buildings, especially the super high-rise buildings, requirements for seismic performance of shear walls have become more sophisticated. This introduction summarizes the commonly used in embedded development and existing problems of steel plate shear wall, which are stiffened steel plate shear wall, non-stiffened steel plate shear wall, composite steel plate shear wall, preventing buckling of steel plate shear wall and low yield point steel plate shear wall.

scholarly journals Seismic Behavior of Steel-Fiber-Reinforced High-Strength Concrete Shear Wall with CFST Columns: Experimental Investigation

Fibers ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 75
Author(s):  
Ke Shi ◽  
Mengyue Zhang ◽  
Pengfei Li ◽  
Ru Xue ◽  
Peibo You ◽  
...  
Keyword(s):  
Seismic Behavior ◽  
Steel Fiber ◽  
Shear Walls ◽  
High Strength ◽  
Shear Wall ◽  
Fiber Reinforced ◽  
Composite Shear Wall ◽  
Energy Dissipation Capacity ◽  
Cfst Columns ◽  
Composite Shear

To improve the seismic behavior of shear walls, a new composite shear wall composed of a steel-fiber-reinforced high-strength concrete (SFRHC) web and two square concrete-filled steel tube (CFST) columns, namely a steel-fiber-reinforced concrete shear wall with CFST columns, is proposed in this paper. Therefore, the main purpose of this paper is to present an experimental investigation of the seismic behavior of the SFRHC shear wall with CFST columns. Pseudo-static tests were carried out on seven composite shear walls, and the seismic performance of the shear walls was studied and quantified in terms of the aspects of energy consumption, ductility and stiffness degradation. Furthermore, the experimental results indicated that adding steel fiber can effectively restrain the crack propagation of composite shear walls and further help to improve the ductility and energy dissipation capacity of composite shear walls and delay the degradation of their lateral stiffness and force. Moreover, the seismic behavior of the SFRHC shear wall with CFST columns was obviously superior to that of the conventionally reinforced shear wall, in terms of load-bearing capacity, ductility, stiffness and energy dissipation capacity, because of the confinement effect of the CFST columns on the web. Finally, the preliminary study demonstrated that the composite shear wall has good potential to be used in regions with high seismic risk.

Experiment Study on Deformation Properties of Composite Shear Wall Combined with Cement Formwork and Concrete under Static Load

2014 ◽  
Vol 578-579 ◽  
pp. 325-330
Author(s):  
Xiao Ruan Song ◽  
Xiao Zhu ◽  
Xiao Yun Zhang ◽  
Yong Mong Wang ◽  
Chao Yan ◽  
...  
Keyword(s):  
Work Performance ◽  
Static Load ◽  
Composite Layer ◽  
Shear Walls ◽  
Middle Layer ◽  
Shear Wall ◽  
Composite Shear Wall ◽  
Wall Stiffness ◽  
Deformation Properties ◽  
Composite Shear

A structure type of composite shear wall is presented, the both sides of which are reinforced cement composite layer and the middle layer of which is concrete. In order to verify the cooperative work performance of cement-base composite layer and concrete, static load tests were carried out. In the test, the deformation properties of composite shear walls and the development law of the strain of concrete and steel were studied. Meanwhile, a normal shear wall with the same conditions was tested and the corresponding natures of two types of shear wall were contrasted and analyzed. The test results prove that the composite shear wall has a good overall deformation behavior, and can, to some extent, slow down the process of wall stiffness degradation. The research production has provided a foundation for the further exploration to the working properties of the composite shear wall under cyclic loading.

Effect of axial compression ratio on concrete-filled steel tube composite shear wall

2018 ◽  
Vol 22 (3) ◽  
pp. 656-669 ◽  
Author(s):  
Hetao Hou ◽  
Weiqi Fu ◽  
Canxing Qiu ◽  
Jirun Cheng ◽  
Zhe Qu ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Axial Compression ◽  
Compression Ratio ◽  
Shear Walls ◽  
Shear Wall ◽  
Steel Tube ◽  
Concrete Filled Steel Tube ◽  
Axial Compression Ratio ◽  
Composite Shear Wall ◽  
Composite Shear

This study proposes a new type of shear wall, namely, the concrete-filled steel tube composite shear wall, for high performance seismic force resisting structures. In order to study the seismic behavior of concrete-filled steel tube composite shear wall, cyclic loading tests were conducted on three full-scale specimens. One conventional reinforced concrete shear wall was included in the testing program for comparison purpose. Regarding the seismic performance of the shear walls, the failure mode, deformation capacity, bearing capacity, ductility, hysteretic characteristics, and energy dissipation are key parameters in the analysis procedure. The testing results indicated that the bearing capacity, the ductility, and the energy dissipation of the concrete-filled steel tube composite shear walls are greater than that of conventional reinforced concrete shear walls. In addition, the influence of axial compression ratio on the seismic behavior of concrete-filled steel tube composite shear wall is also investigated. It was found that higher axial compression ratio leads to an increase in the bearing capacity of concrete-filled steel tube composite shear walls while a reduction in the ductility capacity.

Cyclic Loading Response of Composite Corrugated Steel Plate Shear Walls - Smart Technic

2021 ◽  
Vol 14 (4) ◽  
pp. 131-145
Author(s):  
Nabaa Salah Hassan
Keyword(s):  
Cyclic Loading ◽  
Steel Plate ◽  
Shear Walls ◽  
Shear Wall ◽  
Structural Elements ◽  
Structural Element ◽  
Steel Plate Shear Walls ◽  
Composite Shear Wall ◽  
Steel Shear Wall ◽  
Composite Shear

The structural element within the whole structure contains structural elements like beams, slabs, columns and reinforced concrete walls. One of the most vertical structural elements is shear wall that built to giving stability to the building, resisting lateral force such as earthquake and wind and to reduce the building deformations.  In present study, the analysis of corrugated vertical steel plate shear walls using finite element method by ABAQUS software is examined. Four different modes are analysed in which the first model is vertical corrugated steel shear wall plate, second is the composite shear wall with full interaction, third is the composite shear wall and finally the fourth model is composite shear wall with gap between concrete panel and steel frame to check out the full performance of different shear wall under the effects of cyclic loadings. Displacement, drift and energy dissipation will investigate throughout analysis.  Analysis results indicated that the gap and composite action between steel and concrete panel play an important role on the performance of shear wall under cyclic loading. The decrease in displacement of composite shear wall as compared with the steel shear wall reach 11.86%.

scholarly journals Axial and Bending Bearing Capacity of Double-Steel-Concrete Composite Shear Walls

2020 ◽  
Vol 10 (14) ◽  
pp. 4935
Author(s):  
Peiyao Zhang ◽  
Quanquan Guo ◽  
Fei Ke ◽  
Weiyi Zhao ◽  
Yinghua Ye
Keyword(s):  
Bearing Capacity ◽  
Design Method ◽  
Shear Walls ◽  
Element Model ◽  
Shear Wall ◽  
Test Results ◽  
Nuclear Facilities ◽  
Bending Performance ◽  
Composite Shear Wall ◽  
Composite Shear

Double steel-concrete composite shear wall is a novel composite structure. Due to its good mechanical properties, it has been considered as a substitute for reinforced concrete walls in nuclear facilities, marine environmental structures, and high-rise buildings. However, the design method of the double-steel concrete composite shear wall is lacking. The purpose of this paper is to propose the bending capacity formula under large and small eccentric loads. By summarizing the test results of 49 steel-concrete composite double shear walls under cyclic loading from different studies, it was found that the bending failure of double-steel-concrete composite shear walls was featured by the concrete crushing at the bottom. A finite element model was established and it could simulate the axial and bending performance of double steel-concrete composite shear walls reasonably well. According to the experimental results and FE analysis, the primary assumptions for calculating the axial and bending bearing capacity of the double steel-concrete composite shear walls were proposed. Based on these assumptions, the bearing capacity formulas were derived according to the equilibrium theory of the cross section. The calculation results obtained by the bearing capacity formulas were in good agreement with the test results.

scholarly journals Performance of Composite Shear Walls Subjected to In-plane Cyclic Loading - A Numerical Parametric Study

2021 ◽  
Author(s):  
Mojtaba Labibzadeh ◽  
Anis Salehnia ◽  
Khandaker M. A. Hossain ◽  
Deng-Hu Jing
Keyword(s):  
Energy Absorption ◽  
Steel Plate ◽  
Numerical Models ◽  
Load Capacity ◽  
Shear Walls ◽  
Shear Wall ◽  
Plate Height ◽  
Finite Element Software ◽  
Composite Shear Wall ◽  
Composite Shear

An RC shear wall (wall1), a composite shear wall composed of a single external steel plate connected to a concrete panel (wall2), a composite shear wall constructed from two external steel plates connected to an internal concrete panel (wall3) and finally a composite shear wall fabricated with a single internal steel plate embedded within a concrete panel (wall4) are considered in this study and their behavior are assessed and compared under the effect of an in-plane cyclic load. Variation of the three functions include shear load capacity, energy absorption and shear stiffness of the walls are evaluated numerically using the ABAQUS finite element software. The performance of numerical models is validated against to the experimental results. The effects of four parameters consisting of compressive strength of concrete, yield strength of steel plate, height-to-length ratio of the wall and the thickness of the steel plate are investigated on the above-mentioned functions. Obtained results show that the wall4 has the best performance among all four types of shear walls. For instance, the energy absorption capacity of the wall4 is approximately two times greater than that of wall1 and wall2.

Sign in / Sign up

Export Citation Format

Share Document