scholarly journals Evaluation of the Efficacy of Mineralized Dentin Graft in the Treatment of Intraosseous Defects: An Experimental In Vivo Study

Medicina ◽  
2022 ◽  
Vol 58 (1) ◽  
pp. 103
Author(s):  
Nuray Özkahraman ◽  
Nilüfer Bölükbaşı Balcıoğlu ◽  
Merva Soluk Tekkesin ◽  
Yusuf Altundağ ◽  
Serdar Yalçın

Background and Objectives: Dentin grafts have osteoinductive and osteoconductive properties and are considered as an alternative to autogenous graft. This study evaluates the efficacy of autogenous mineralized dentin graft (AMDG) alone or with xenograft and compares it with those of various graft materials used in the treatment of intraosseous bone defects. Materials and Methods: The third incisor teeth of six sheep (2–3 years old) were extracted and AMDG was obtained. Six defects were prepared on each tibia of these six sheep: empty defect (group E); autogenous graft (group A), dentin graft (group D), xenograft (group X), autogenous + xenograft (group A + X) and dentin + xenograft (group D + X). Three sheep in each group were sacrificed in the post-operative 3rd and 6th week and the histologic analyses were performed. Results: The D and D + X groups showed histological features similar to the other groups in the 3rd and 6th weeks. No statistically significant difference was found regarding the rates of new bone formation between the D and D + X groups (p = 1.0) and the other groups at both time intervals (p > 0.05). Conclusions: Similar results observed in this study between groups A, D, X, A + X and D + X demonstrate that AMDG can be successfully used in the treatment of intraosseous bone defects. Further experimental and clinical studies are needed to be able to evaluate the effectiveness of dentin grafts in different types of indications.

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Shan Chen ◽  
Yu-Tong Jin ◽  
Zheng-Yang Zhu ◽  
Ling-Tao Wu ◽  
Ping Yang ◽  
...  

Objective. To investigate the site of action of sinapine thiocyanate (ST), following acupoint herbal patching (AHP). Methods. Twenty Wistar rats were randomized into five groups (groups A, B, C, D, and E), and all groups received the same AHP in vivo. Skin samples were excised at 2 h, 4 h, 6 h, 10 h, and 26 h after AHP administration from group A to group E separately and the concentrations of ST in the skin were determined using a liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) method. A pharmacokinetic profile of ST following AHP was performed at the same time in a group of five Wistar rats to detect plasma levels at the same time intervals. Results. The mean ± SD ST concentrations (ng/ml) at 2 h (group A), 4 h (group B), 6 h (group C), 10 h (group D), and 26 h (group E) after AHP administration were 250.01±61.99, 61.01±30.41, 40.12±26.94, 78.66±59.43, and 19.55±18.95, respectively. No ST was detected in rats’ plasma samples at the same time points. Conclusions. The site of action of ST following AHP is in the skin.


2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Xiao-Rui Jiang ◽  
Hui-Ying Yang ◽  
Xin-Xin Zhang ◽  
Guo-Dong Lin ◽  
Yong-Chun Meng ◽  
...  

Abstract This study aims to investigate the repair of bone defects with prefabricated vascularized bone grafts and double-labeled bone marrow-derived mesenchymal stem cells (BMSCs) in a rat model. BMSCs were separated from rat bone marrow. LTR-CMVpro-RFP and LTR-CMVpro-GFP were transfected into the BMSCs for in vitro and in vivo tracking. BMSCs-RFP and BMSCs-GFP were induced into endothelial progenitor cells (EPCs) and osteoblasts (OBs). Rats were divided into five groups: Group A: in vitro prefabrication with EPCs-RFP + in vivo prefabrication with arteriovenous vascular bundle + secondary OBs-GFP implantation; Group B: in vitro prefabrication with EPCs-RFP + secondary OBs-GFP implantation; Group C: in vivo prefabrication with arteriovenous vascular bundle + secondary OBs-GFP implantation; Group D: implantation of EPCs-RFP + implantation of with arteriovenous vascular bundle + simultaneous OBs-GFP implantation; Group E: demineralized bone matrix (DBM) grafts (blank control). Among five groups, Group A had the fastest bone regeneration and repair, and the regenerated bone highly resembled normal bone tissues; Group D also had fast bone repair, but the repair was slightly slower than Group A. Therefore, in vitro prefabrication with EPCs-RFP plus in vivo prefabrication with arteriovenous vascular bundle and secondary OBs-GFP implantation could be the best treatment for bone defect.


2008 ◽  
Vol 02 (03) ◽  
pp. 185-190 ◽  
Author(s):  
Mustafa Zortuk ◽  
Kerem Kılıc ◽  
Gulay Uzun ◽  
Ahmet Ozturk ◽  
Bulent Kesim

ABSTRACTObjectives: The aim of this study was to investigate surface roughness in provisional crown acrylics, after polishing, reinforced with different concentrations of glass fibers.Methods: A total of 48 disk-shaped specimens were prepared using autopolymerizing acrylic resin. These specimens were divided into four groups according to the level of glass fiber added: Group A (no fiber), Group B (0.5%), Group C (1%) and Group D (2%). After polishing the specimens, an average surface roughness (Ra) value was calculated using a profilometer from four randomly selected points on the surface.Results: A significant difference was determined among the surface roughness values of provisional crown resins to which different concentrations of fiber had been added (P<.001).Tukey�s test was then used to perform paired comparisons of the data between the different groups, and a significant difference was found between Group A (no fiber) and the other groups, between Group B (0.5%) and Group D (2%) and between Group C (1%) and Group D. On the other hand, there was no significant difference between Group B and Group C.Conclusions: The reinforcement of provisional crown and fixed partial denture resin with glass fibers increases surface roughness. (Eur J Dent 2008;2:185-190)


2012 ◽  
Vol 13 (4) ◽  
pp. 534-538 ◽  
Author(s):  
Sridhar Premkumar ◽  
Haritha Pottipalli Sathyanarayana ◽  
WS Manjula

ABSTRACT Aim Maximum voluntary bite force (MVBF) was assessed in adults with class I normal occlusion and compared with different malocclusions. Materials and methods One hundred and ten subjects in the age group of 17 to 25 years were classified into various groups. Thirty subjects with class I normal occlusion (Group A), 20 subjects with Angle's class I malocclusion (Group B), 20 subjects with skeletal class II malocclusion (Group C), 20 subjects with hypodivergent facial morphology (Group D) and 20 subjects with hyperdivergent facial morphology (Group E). MVBF was measured with a bite force meter at the first premolar and first molar region bilaterally. The values were recorded and statistically analyzed. Results Mean MVBF value in each of the groups in the molar and first premolar region were found to be 601.83N ± 60.80, 392N ± 31.43 (group A), 592.60N ± 37.66, 378.90N ± 23.00 (group B), 586.60N ± 49.26, 377N ± 29.38 (group C), 771.50N ± 27.24, 500.60N ± 18.25 (group D), 283.85N ± 26.41, 283.85N ± 26.41 (group E). Student paired t-test was done to analyze the difference between two groups and considered as significant at a p-value of < 0.05. Significant difference was found between group A and D and group A and E with a p-value of <0.0001. No significant difference was observed between group A and group B (p = 0.5481and 0.1148) and group A and group C (p = 0.3551 and 0.0949). ANOVA showed that there was a significant difference among groups A, D and E. No significant difference was found among groups A, B and C. Males had a higher value than females. Conclusion Sagittal morphology does not significantly affect the MVBF value whereas there is a significant correlation with vertical morphology. Clinical significance Assessment of maximum voluntary bite force (MVBF) is a chairside procedure to evaluate masticatory muscle activity based on which treatment planning and mechanics can be known. How to cite this article Sathyanarayana HP, Premkumar S, Manjula WS. Assessment of Maximum Voluntary Bite Force in Adults with Normal Occlusion and Different Types of Malocclusions. J Contemp Dent Pract 2012;13(4):534-538.


Obesity Facts ◽  
2021 ◽  
pp. 1-9
Author(s):  
Serdar Sahin ◽  
Havva Sezer ◽  
Ebru Cicek ◽  
Yeliz Yagız Ozogul ◽  
Murat Yildirim ◽  
...  

<b><i>Introduction:</i></b> The aim of this was to describe the predictors of mortality related to COVID-19 infection and to evaluate the association between overweight, obesity, and clinical outcomes of COVID-19. <b><i>Methods:</i></b> We included the patients &#x3e;18 years of age, with at least one positive SARS-CoV-2 reverse transcriptase-polymerase chain reaction. Patients were grouped according to body mass index values as normal weight &#x3c;25 kg/m<sup>2</sup> (Group A), overweight from 25 to &#x3c;30 kg/m<sup>2</sup> (Group B), Class I obesity 30 to &#x3c;35 kg/m<sup>2</sup> (Group C), and ≥35 kg/m<sup>2</sup> (Group D). Mortality, clinical outcomes, laboratory parameters, and comorbidities were compared among 4 groups. <b><i>Results:</i></b> There was no significant difference among study groups in terms of mortality. Noninvasive mechanical ventilation requirement was higher in group B and D than group A, while it was higher in Group D than Group C (Group B vs. Group A [<i>p</i> = 0.017], Group D vs. Group A [<i>p</i> = 0.001], and Group D vs. Group C [<i>p</i> = 0.016]). Lung involvement was less common in Group A, and presence of hypoxia was more common in Group D (Group B vs. Group A [<i>p</i> = 0.025], Group D vs. Group A [<i>p</i> &#x3c; 0.001], Group D vs. Group B [<i>p</i> = 0.006], and Group D vs. Group C [<i>p</i> = 0.014]). The hospitalization rate was lower in Group A than in the other groups; in addition, patients in Group D have the highest rate of hospitalization (Group B vs. Group A [<i>p</i> &#x3c; 0.001], Group C vs. Group A [<i>p</i> &#x3c; 0.001], Group D vs. Group A [<i>p</i> &#x3c; 0.001], Group D vs. Group B [<i>p</i> &#x3c; 0.001], and Group D vs. Group C [<i>p</i> = 0.010]). <b><i>Conclusion:</i></b> COVID-19 patients with overweight and obesity presented with more severe clinical findings. Health-care providers should take into account that people living with overweight and obesity are at higher risk for COVID-19 and its complications.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Fei Huo ◽  
Hansheng Liang ◽  
Yi Feng

Abstract Background Pernicious placenta previa (PPP) can increase the risk of perioperative complications. During caesarean section in patients with adherent placenta, intraoperative blood loss, hysterectomy rate and transfusion could be reduced by interventional methods. Our study aimed to investigate the influence of maternal hemodynamics control and neonatal outcomes of prophylactic temporary abdominal aortic balloon (PTAAB) occlusion for patients with pernicious placenta previa. Methods This was a retrospective study using data from the Peking University People’s Hospital from January 2014 through January 2020. Clinical records of pregnant women undergoing cesarean section were collected. Patients were divided into two groups: treatment with PTAAB placement (group A) and no balloon placement (group B). Group A was further broken down into two groups: prophylactic placement (Group C) and balloon occlusion (group D). Results Clinical records of 33 cases from 5205 pregnant women underwent cesarean section were collected. The number of groups A, B, C, and D were 17, 16, 5 and 12.We found that a significant difference in the post-operative uterine artery embolism rates between group A and group B (0% vs.31.3%, p = 0.018). There was a significant difference in the Apgar scores at first minute between group A and group B (8.94 ± 1.43 vs 9.81 ± 0.75,p = 0.037),and the same significant difference between two groups in the pre-operative central placenta previa (29.4% vs. 0%,p = 0.044), complete placenta previa (58.8% vs 18.8%, p = 0.032),placenta implantation (76.5% vs 31.3%, p = 0.015). We could also observe the significant difference in the amount of blood cell (2.80 ± 2.68vs.10.66 ± 11.97, p = 0.038) and blood plasma transfusion (280.00 ± 268.32 vs. 1033.33 ± 1098.20, p = 0.044) between group C and group D. The significant differences in the preoperative vaginal bleeding conditions (0% vs 75%, p = 0.009), the intraoperative application rates of vasopressors (0% vs. 58.3%, p = 0.044) and the postoperative ICU (intensive care unit) admission rates (0% vs. 58.3%, p = 0.044) were also kept. Conclusions PTAAB occlusion could be useful in reducing the rate of post-operative uterine artery embolism and the amount of transfusion, and be useful in coping with patients with preoperative vaginal bleeding conditions, so as to reduce the rate of intraoperative applications of vasopressors and the postoperative ICU (intensive care unit) admission. In PPP patients with placenta implantation, central placenta previa and complete placenta previa, we advocate the utilization of prophylactic temporary abdominal aortic balloon placement.


2006 ◽  
Vol 54 (10) ◽  
pp. 39-45
Author(s):  
A. Vargas ◽  
D. González ◽  
A. Estival ◽  
G. Buitrón

This work presents a comparison of two inocula used for the acclimation of two anaerobic-aerobic sequencing batch bioreactors used for toxic wastewater treatment. The bioreactors were acclimated with different types of sludge: one coming from an anaerobic wastewater treatment plant and the other one from a conventional aerobic activated sludge plant. The model toxic compound was p-nitrophenol, which is reduced to p-aminophenol during the initial anaerobic phase of the reaction, and later mineralized during a posterior aerated reaction phase. Biodegradation of the compounds was monitored using UV/Vis spectrophotometry. After acclimation stabilization of the sludge and of the process was also monitored. Results show that there is no significant difference in acclimation times and stability of the process between the two employed inocula, and thus an originally anaerobic inoculum presents no apparent advantage over a more easily accessible aerobic one.


2021 ◽  
Vol 11 (7) ◽  
pp. 1263-1270
Author(s):  
Zhong-Yu Liu ◽  
Jin-Li Zhang ◽  
Yang Zhang ◽  
Shi-Lian Kan ◽  
Jun Liang ◽  
...  

Objective: This study aimed to investigate the feasibility of repairing rabbit radius bone defects with simvastatin compound biological bone. Methods: Simvastatin biological bone material was prepared, and osteoblasts were cultured. A total of 42 New Zealand white rabbits were randomly divided into four groups, and a bone defect with a length of 15 mm was created at the middle part of the radial shaft of both limbs in each rabbit, thereby establishing a bone defect model. The grafts in group A were biological bones of osteoblasts combined with simvastatin; the grafts in group B were biological bones of simvastatin; the grafts in group C were biological compound bones of osteoblasts; and the grafts in group D were simple biological bones. In each group, four animals were randomly sacrificed at the sixth and twelfth week after surgery, and specimens were collected for gross observation, X-ray examination, histological observation, and biomechanical testing. In each group, two animals were randomly sacrificed at the twelfth week after surgery; a three-point bending test was performed using a biomechanical testing machine, and the results were compared with those of a normal radius. Results: The X-ray and histological examinations at 6 and 12 weeks after surgery revealed that the osteogenesis ability of the simvastatin biological bone and osteoblast-simvastatin biological bone was better than that of the osteoblast biological bone and simple biological bone, which was superior in group A and group B to group C and group D. The results of the biomechanical examination revealed that the maximum stress of the normal radius was significantly higher than that of the experimental groups. Among the experimental groups, the difference between group A and group B was not statistically significant, and the maximum stress was higher in groups A and B than in groups C and D. Conclusion: Simvastatin biological bone material can promote the repair of rabbit radius defects and increase the quality of bone healing.


Author(s):  
Hooman Teymourian ◽  
Farzad Ashrafi ◽  
Farnak Behnaz ◽  
Hamidreza Azizi Faresani ◽  
Fatemeh Rezaee-Tazangi ◽  
...  

Background: Depression is a complicated disturbance affected by a collection of biological and environmental factors. The first aim of psychiatric studies is to recognize biological markers that could be utilized to predict improvement and increase reactions to antidepressant treatments. Diet affects different aspects of health, including depression. The aim of study was to determine antidepressant-like effects of some consumable oils, the effects of oils on depression were compared. Methods: Thirty-two male and female mice (Mus musculus (BALB/c)) weighing 25- 35 g were randomly divided into 8 groups (4 mice in each group, 2 male and 2 female, A: Laden sunflower liquid oil, B: 50% vegetable oil + 50% olive oil, C: Kermanshah Rojin animal oil, D: Spring frying oil, E: Distilled water, F: BAHAR solid vegetable oil, G: Olive oil, H: 50% Kermanshah animal oil + 50% of olive oil). In different groups, 30 g of vegetable or animal oil was gavaged every day at 1:00 pm. Five types of vegetable and animal oils among the high consumption oils in the market were selected, including spring frying oil (used for several times in 305˚f, usually used in eastern Asia countries), Laden sunflower liquid oil, olive oil, Kermanshah Rojin animal oil, and BAHAR solid vegetable oil. After 6 weeks of using the oils diet, the forced swim test was utilized as a test of depression like behavior. Results: There was a significant difference between all groups (P < 0.0001). Based on the results, the latency time of immobility in group A significantly decreased in comparison with groups C (P ˂ 0.02), D (P ˂ 0.003), and G (P < 0.001). However, it increased in groups B and C compared to group H (P ˂ 0.02). Also, this parameter in group D increased significantly compared to groups E (P < 0.01), F (P < 0.05), and H (P < 0.002). Conclusion: The results indicated that olive oil had a preventive effect against forced swimming-induced depression-like symptoms.


Author(s):  
Pouran Samimi ◽  
Sara Kaveh ◽  
Maryam Khoroushi

Objectives: Photopolymerization immediately sets dual-cure cements and prevents the continuation of chemical polymerization. Delayed light-curing allows the chemical process to continue up to the point before starting irradiation; however, there is a controversy in this respect. The present study evaluates the effect of delayed light-curing through a zirconia disc on the microhardness and fracture toughness (KIC) of two types of dual-cure cement. Materials and Methods: Samples measuring 25×5×3 mm3 were prepared for fracture toughness test, and discs measuring 5 mm in diameter and 3 mm in thickness were prepared for microhardness test using Bifix and BisCem cements. Light-curing protocols were as follows: immediate light-curing (group A), a 2-minute delay (group B), a 5-minute delay (group C), direct irradiation (group D), and no irradiation (group E). In groups A to C, light-curing was carried out through a zirconia disc. Data were analyzed by two-way and one-way analysis of variance (ANOVA), post-hoc Tukey's test, and Kruskal-Wallis test at 95% confidence interval. Results: There was a significant difference in the microhardness of the cements (P=0.00). Delayed light-curing had no effect on microhardness (P=0.080). The microhardness of BisCem in group E was significantly lower than that in group D (P=0.015). The fracture toughness of Bifix in groups B and C was significantly different than that in group E and BisCem groups. Conclusions: Under the limitations of our study, delayed light-curing had different effects on microhardness and fracture toughness. Differences in light-curing protocols resulted in different effects based on the cement type. Light-curing is recommended to achieve optimal mechanical properties.


Sign in / Sign up

Export Citation Format

Share Document