scholarly journals Implementing Digital Edge Enhancers on Improved High-Resolution Aeromagnetic Signals for Structural-Depth Analysis around the Middle Benue Trough, Nigeria

Minerals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1247
Author(s):  
Eko Gerald Ejiga ◽  
Noer El Hidayah Ismail ◽  
Ismail Yusoff
Keyword(s):  
High Resolution ◽  
Mineral Exploration ◽  
High Amplitude ◽  
Tectonic Structures ◽  
Near Surface ◽  
Benue Trough ◽  
Depth Analysis ◽  
Lead Zinc ◽  
Deep Depth ◽  
Depth Ranges

Digital edge detector operations using magnetic derivatives in conjunction with spectra depth analysis were performed on high-resolution aeromagnetic signals to enhance the delineation and interpretation of depth, structural, and intrasedimentary features within the Middle Benue Trough (MBT) of North Central Nigeria, which could serve as a guide for mineral exploration. The derivatives revealed high-amplitude and short-wavelength anomalies over areas underlain by crystalline basement complexes, major volcanic zones, and aggregates of intrasedimentary volcanic and plutonic rocks. Geologic lineaments trending predominantly NE–SW and NW–SE, as well as minor trends of E–W and N–S, suggest that the area has undergone differential stress regimes across geologic time. The spectral depth analysis indicates a two-source depth model. The deep depth ranges from 1.9 to 6.1 km with an average of 3.9 km, whereas the shallow depth ranges between 0.3 and 1.9 km with an average of 0.8 km and is found to emanate from magnetic signals of post-Cretaceous near-surface igneous intrusions as well as other magnetized bodies embedded within the sediments. The spatial distribution of various hydrothermal minerals such as lead–zinc–barite deposits, as well as salt mineralization, is associated with the widespread Tertiary–recent magmatism and governed by pre-existing tectonic structures in the region.

scholarly journals Interpretation of high resolution airborne magnetic data (HRAMD) of Ilesha and its environs, Southwest Nigeria, using Euler deconvolution method

2017 ◽  
Vol 64 (4) ◽  
pp. 227-241
Author(s):  
Oluwaseun Tolutope Olurin
Keyword(s):  
High Resolution ◽  
High Amplitude ◽  
Sharp Contrast ◽  
Magnetic Data ◽  
Magnetic Intensity ◽  
Euler Deconvolution ◽  
Southwestern Nigeria ◽  
Near Surface ◽  
Low Amplitude ◽  
Airborne Magnetic

AbstractInterpretation of high resolution aeromagnetic data of Ilesha and its environs within the basement complex of the geological setting of Southwestern Nigeria was carried out in the study. The study area is delimited by geographic latitudes 7°30′–8°00′N and longitudes 4°30′–5°00′E. This investigation was carried out using Euler deconvolution on filtered digitised total magnetic data (Sheet Number 243) to delineate geological structures within the area under consideration. The digitised airborne magnetic data acquired in 2009 were obtained from the archives of the Nigeria Geological Survey Agency (NGSA). The airborne magnetic data were filtered, processed and enhanced; the resultant data were subjected to qualitative and quantitative magnetic interpretation, geometry and depth weighting analyses across the study area using Euler deconvolution filter control file in Oasis Montag software. Total magnetic intensity distribution in the field ranged from –77.7 to 139.7 nT. Total magnetic field intensities reveal high-magnitude magnetic intensity values (high-amplitude anomaly) and magnetic low intensities (low-amplitude magnetic anomaly) in the area under consideration. The study area is characterised with high intensity correlated with lithological variation in the basement. The sharp contrast is enhanced due to the sharp contrast in magnetic intensity between the magnetic susceptibilities of the crystalline and sedimentary rocks. The reduced-to-equator (RTE) map is characterised by high frequencies, short wavelengths, small size, weak intensity, sharp low amplitude and nearly irregular shaped anomalies, which may due to near-surface sources, such as shallow geologic units and cultural features. Euler deconvolution solution indicates a generally undulating basement, with a depth ranging from −500 to 1000 m. The Euler deconvolution results show that the basement relief is generally gentle and flat, lying within the basement terrain.

The application of reflection seismology to the investigation of the geometry of near-surface units and faults in the Blake River Group, Abitibi Belt, Quebec

1992 ◽  
Vol 29 (9) ◽  
pp. 2038-2045 ◽  
Author(s):  
Erick Adam ◽  
Bernd Milkereit ◽  
Marianne Mareschal ◽  
Arthur E. Barnes ◽  
Claude Hubert ◽  
...  
Keyword(s):  
High Resolution ◽  
High Frequency ◽  
Seismic Reflection ◽  
Mineral Exploration ◽  
Shear Waves ◽  
Reflection Seismology ◽  
Frequency Content ◽  
Near Surface ◽  
Surface Geology ◽  
High Frequency Content

Reprocessing of part of a Lithoprobe high-resolution seismic reflection line across the southern part of the Abitibi Belt has improved the imaging of shallow reflections and allowed correlation of the data with surface geology. Enhancement of early reflections was accomplished by focusing on the high-frequency content of the data. This improved resolution of reflections at two-way traveltime as early as 0.3 s and attenuated noise such as shear waves. The shallow reflections are interpreted as impedance contrasts at the contact between a metadiabase–diorite body and metavolcanics rocks. Offsets of the reflectors correlate with faults mapped at the surface and indicate a downdropped block, which may be of interest for mineral exploration.

LEAD-ZINC MINERALIZATION IN THE CRETACEOUS SEDIMENTS OF BENUE TROUGH OF NIGERIA

2018 ◽  
Author(s):  
Nnaemeka Chidubem Onyeagba ◽  
◽  
Thomas Seifert
Keyword(s):  
Benue Trough ◽  
Lead Zinc

scholarly journals Geophysical investigations for stability and safety mitigation of regional crude-oil pipeline near abandoned coal mines

2021 ◽  
Vol 18 (1) ◽  
pp. 145-162
Author(s):  
B Butchibabu ◽  
Prosanta Kumar Khan ◽  
P C Jha
Keyword(s):  
High Resolution ◽  
Crude Oil ◽  
Seismic Refraction ◽  
High Resolution Imaging ◽  
Weak Zone ◽  
Near Surface ◽  
Oil Pipeline ◽  
Refraction Tomography ◽  
Geophysical Investigations ◽  
Resolution Imaging

Abstract This study aims for the protection of a crude-oil pipeline, buried at a shallow depth, against a probable environmental hazard and pilferage. Both surface and borehole geophysical techniques such as electrical resistivity tomography (ERT), ground penetrating radar (GPR), surface seismic refraction tomography (SRT), cross-hole seismic tomography (CST) and cross-hole seismic profiling (CSP) were used to map the vulnerable zones. Data were acquired using ERT, GPR and SRT along the pipeline for a length of 750 m, and across the pipeline for a length of 4096 m (over 16 profiles of ERT and SRT with a separation of 50 m) for high-resolution imaging of the near-surface features. Borehole techniques, based on six CSP and three CST, were carried out at potentially vulnerable locations up to a depth of 30 m to complement the surface mapping with high-resolution imaging of deeper features. The ERT results revealed the presence of voids or cavities below the pipeline. A major weak zone was identified at the central part of the study area extending significantly deep into the subsurface. CSP and CST results also confirmed the presence of weak zones below the pipeline. The integrated geophysical investigations helped to detect the old workings and a deformation zone in the overburden. These features near the pipeline produced instability leading to deformation in the overburden, and led to subsidence in close vicinity of the concerned area. The area for imminent subsidence, proposed based on the results of the present comprehensive geophysical investigations, was found critical for the pipeline.

scholarly journals “Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium Niobate Thin Films

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 288
Author(s):  
Sven Reitzig ◽  
Michael Rüsing ◽  
Jie Zhao ◽  
Benjamin Kirbus ◽  
Shayan Mookherjea ◽  
...  
Keyword(s):  
Lithium Niobate ◽  
Second Harmonic ◽  
Imaging Techniques ◽  
Piezoresponse Force Microscopy ◽  
Periodically Poled ◽  
Near Surface ◽  
Domain Structures ◽  
Depth Analysis ◽  
Improved Performance ◽  
Quantum Optical

Nonlinear and quantum optical devices based on periodically-poled thin film lithium niobate (PP-TFLN) have gained considerable interest lately, due to their significantly improved performance as compared to their bulk counterparts. Nevertheless, performance parameters such as conversion efficiency, minimum pump power, and spectral bandwidth strongly depend on the quality of the domain structure in these PP-TFLN samples, e.g., their homogeneity and duty cycle, as well as on the overlap and penetration depth of domains with the waveguide mode. Hence, in order to propose improved fabrication protocols, a profound quality control of domain structures is needed that allows quantifying and thoroughly analyzing these parameters. In this paper, we propose to combine a set of nanometer-to-micrometer-scale imaging techniques, i.e., piezoresponse force microscopy (PFM), second-harmonic generation (SHG), and Raman spectroscopy (RS), to access the relevant and crucial sample properties through cross-correlating these methods. Based on our findings, we designate SHG to be the best-suited standard imaging technique for this purpose, in particular when investigating the domain poling process in x-cut TFLNs. While PFM is excellently recommended for near-surface high-resolution imaging, RS provides thorough insights into stress and/or defect distributions, as associated with these domain structures. In this context, our work here indicates unexpectedly large signs for internal fields occurring in x-cut PP-TFLNs that are substantially larger as compared to previous observations in bulk LN.

Sign in / Sign up

Export Citation Format

Share Document