scholarly journals Self-Assembled Nanomaterials Based on Complementary Sn(IV) and Zn(II)-Porphyrins, and Their Photocatalytic Degradation for Rhodamine B Dye

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3598
Author(s):  
Nirmal K. Shee ◽  
Hee-Joon Kim

A series of porphyrin triads (1–6), based on the reaction of trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP) with six different phenoxy Zn(II)-porphyrins (ZnLn), was synthesized. The cooperative metal–ligand coordination of 3-pyridyl nitrogens in the SnP with the phenoxy Zn(II)-porphyrins, followed by the self-assembly process, leads to the formation of nanostructures. The red-shifts and remarkable broadening of the absorption bands in the UV–vis spectra for the triads in CHCl3 indicate that nanoaggregates may be produced in the self-assembly process of these triads. The emission intensities of the triads were also significantly reduced due to the aggregation. Microscopic analyses of the nanostructures of the triads reveal differences due to the different substituents on the axial Zn(II)-porphyrin moieties. All these nanomaterials exhibited efficient photocatalytic performances in the degradation of rhodamine B (RhB) dye under visible light irradiation, and the degradation efficiencies of RhB in aqueous solution were observed to be 72~95% within 4 h. In addition, the efficiency of the catalyst was not impaired, showing excellent recyclability even after being applied for the degradation of RhB in up to five cycles.

2014 ◽  
Vol 50 (18) ◽  
pp. 2239-2248 ◽  
Author(s):  
Sandip Mukherjee ◽  
Partha Sarathi Mukherjee

This article summarizes the recent developments in the construction of multicomponent molecular hollowed-out cages through the metal–ligand coordination-driven self-assembly process, with a focus on the decreasing relevance of the use of templates.


2019 ◽  
Vol 48 (12) ◽  
pp. 3815-3818 ◽  
Author(s):  
Marco Villa ◽  
Myriam Roy ◽  
Giacomo Bergamini ◽  
Marc Gingras ◽  
Paola Ceroni

Persulfurated asterisks functionalized with six carboxylic groups form a strongly green phosphorescent coordination polymer upon addition of Pb2+ ions in aqueous solution. The self-assembly process is selective and reversible, enabling Pb2+ sensing with a detection limit of 6.0 × 10−7 M.


Author(s):  
Krishna Sailaja A ◽  
Amareshwar P

In order to see the functionality and toxicity of nanoparticles in various food and drug applications, it is important to establish procedures to prepare nanoparticles of a controlled size. Desolvation is a thermodynamically driven self-assembly process for polymeric materials. In this study, we prepared BSA nanoparticles using the desolvation technique using acetone as desolvating agent. Acetone was added intermittently into 1% BSA solution at different pH under stirring at 700 rpm. Amount of acetone added, intermittent timeline of acetone addition, and pH of solution were considered as process parameters to be optimized. The effect of the process parameters on size of the nanoparticles was studied. The results indicated that the size control of BSA nanoparticles was achieved by adding acetone intermittently. The standard deviation of average size of BSA nanoparticles at each preparation condition was minimized by adding acetone intermittently. The intermittent addition in polymeric aqueous solution can be useful for size control for food or drug applications.  


Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1686
Author(s):  
Ruohong Sui ◽  
Paul A. Charpentier ◽  
Robert A. Marriott

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.


Heliyon ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. e06851
Author(s):  
Usha Jinendra ◽  
Dinesh Bilehal ◽  
B.M. Nagabhushana ◽  
Avvaru Praveen Kumar

MRS Advances ◽  
2020 ◽  
Vol 5 (42) ◽  
pp. 2147-2155
Author(s):  
Sudi Chen ◽  
Xitong Ren ◽  
Shufang Tian ◽  
Jiajie Sun ◽  
Feng Bai

AbstractThe self-assembly of optically active building blocks into functional nanocrystals as high-activity photocatalysts is a key in the field of photocatalysis. Cobalt porphyrin with abundant catalytic properties is extensively studied in photocatalytic water oxidation and CO2 reduction. Here, we present the fabrication of cobalt porphyrin nanocrystals through a surfactant-assisted interfacial self-assembly process using Co-tetra(4-pyridyl) porphyrin as building block. The self-assembly process relies on the combined noncovalent interactions such as π-π stacking and axial Co-N coordination between individual porphyrin molecules within surfactant micelles. Tuning different reaction conditions (temperature, the ratio of co-solvent DMF) and types of surfactant, various nanocrystals with well-defined 1D to 3D morphologies such as nanowires, nanorods and nano hexagonal prism were obtained. Due to the ordered accumulation of molecules, the nanocrystals exhibit the properties of the enhanced capability of visible light capture and can conduce to improve the transport and separation efficiency of the photogenerated carriers, which is important for photocatalysis. Further studies of photocatalytic CO2 reduction are being performed to address the relationship between the size and shape of the nanocrystals with the photocatalytic activity.


Sign in / Sign up

Export Citation Format

Share Document