scholarly journals Comprehensive Insight into Chemical Stability of Important Antidiabetic Drug Vildagliptin Using Chromatography (LC-UV and UHPLC-DAD-MS) and Spectroscopy (Mid-IR and NIR with PCA)

Molecules ◽  
2021 ◽  
Vol 26 (18) ◽  
pp. 5632
Author(s):  
Anna Gumieniczek ◽  
Anna Berecka-Rycerz ◽  
Emilia Fornal ◽  
Barbara Żyżyńska-Granica ◽  
Sebastian Granica

During forced degradation, the intrinsic stability of active pharmaceutical ingredients (APIs) could be determined and possible impurities that would occur during the shelf life of the drug substance or the drug product could be estimated. Vildagliptin belongs to relatively new oral antidiabetic drugs named gliptins, inhibiting dipeptidyl peptidase 4 (DPP-4) and prolonging the activities of the endogenous incretin hormones. At the same time, some gliptins were shown as prone to degradation under specific pH and temperature conditions, as well as in the presence of some reactive excipients. Thus, forced degradation of vildagliptin was performed at high temperature in extreme pH and oxidative conditions. Then, selective LC-UV was used for quantitative determination of non-degraded vildagliptin in the presence of its degradation products and for degradation kinetics. Finally, identification of degradation products of vildagliptin was performed using an UHPLC-DAD-MS with positive ESI. Stability of vildagliptin was also examined in the presence of pharmaceutical excipients, using mid-IR and NIR with principal component analysis (PCA). At 70 °C almost complete disintegration of vildagliptin occurred in acidic, basic, and oxidative media. What is more, high degradation of vildagliptin following the pseudo first-order kinetics was observed at room temperature with calculated k values 4.76 × 10−4 s−1, 3.11 × 10−4 s−1, and 1.73 × 10−4 s−1 for oxidative, basic and acidic conditions, respectively. Next, new degradation products of vildagliptin were detected using UHPLC-DAD-MS and their molecular structures were proposed. Three degradants were formed under basic and acidic conditions, and were identified as [(3-hydroxytricyclo- [3.3.1.13,7]decan-1-yl)amino]acetic acid, 1-{[(3-hydroxytricyclo[3.3.1.13,7]decan-1-yl)amino]acetyl}-pyrrolidine-2-carboxylic acid and its O-methyl ester. The fourth degradant was formed in basic, acidic, and oxidative conditions, and was identified as 1-{[(3-hydroxytricyclo[3.3.1.13,7]-decan-1-yl)amino]acetyl}pyrrolidine-2-carboxamide. When stability of vildagliptin was examined in the presence of four excipients under high temperature and humidity, a visible impact of lactose, mannitol, magnesium stearate, and polyvinylpirrolidone was observed, affecting-NH- and CO groups of the drug. The obtained results (kinetic parameters, interactions with excipients) may serve pharmaceutical industry to prevent chemical changes in final pharmaceutical products containing vildagliptin. Other results (e.g., identification of new degradation products) may serve as a starting point for qualifying new degradants of vildagliptin as it is related to substances in pharmacopoeias.

Pharmaceutics ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 452 ◽  
Author(s):  
Robnik ◽  
Likozar ◽  
Wang ◽  
Stanić Ljubin ◽  
Časar

Drug substance degradation kinetics in solid dosage forms is rarely mechanistically modeled due to several potential micro-environmental and manufacturing related effects that need to be integrated into rate laws. The aim of our work was to construct a model capable of predicting individual degradation product concentrations, taking into account also formulation composition parameters. A comprehensive study was done on active film-coated tablets, manufactured by layering of the drug substance, a primary amine compound saxagliptin, onto inert tablet cores. Formulation variables like polyethylene glycol (PEG) 6000 amount and film-coat polymer composition are incorporated into the model, and are connected to saxagliptin degradation, via formation of reactive impurities. Derived reaction equations are based on mechanisms supported by ab initio calculations of individual reaction activation energies. Alongside temperature, relative humidity, and reactant concentration, the drug substance impurity profile is dependent on micro-environmental pH, altered by formation of acidic PEG degradation products. A consequence of pH lowering, due to formation of formic acid, is lower formation of main saxagliptin degradation product epi-cyclic amidine, a better resistance of formulation to high relative humidity conditions, and satisfactory tablet appearance. Discovered insights enhance the understanding of degradational behavior of similarly composed solid dosage forms on overall drug product quality and may be adopted by pharmaceutical scientists for the design of a stable formulation.


2013 ◽  
Vol 96 (3) ◽  
pp. 593-598
Author(s):  
Anna Pratima G Nikalje ◽  
Vishnu P Choudhari

Abstract A simple stability-indicating isocratic RP-HPLC method was developed and validated for the determination of mycophenolate sodium and its alkali degradation product. Forced degradation of the drug was carried out under thermolytic, photolytic, acid/base hydrolytic, and oxidative stress conditions. Alkali degradation product DP1 was isolated, and separation of stress degradation products was achieved on a Symmetry C18 (250 × 4.6 mm × 5.0 μm) column using the mobile phase methanol–acetate buffer adjusted with acetic acid to pH 6.0 (76 + 24, v/v) at a 0.55 mL/min flow rate and 50°C. Data were integrated at the detection wavelength of 251 nm. The method validation characteristics included accuracy, precision, linearity, range, specificity, and sensitivity per International Conference on Harmonization guidelines. Robustness testing was conducted to evaluate the effect of minor changes in the chromatographic conditions and to establish appropriate system suitability parameters. Structural elucidation of degraded products was performed by HPLC/MS/MS. The method was used successfully for drug product analysis, dissolution study, and determination of the drug's acid, alkali, and oxidative degradation kinetics.


2011 ◽  
Vol 8 (1) ◽  
pp. 131-148 ◽  
Author(s):  
Trivedi Rakshit Kanubhai ◽  
Patel Mukesh C ◽  
Kharkar Amit R

In the present study gradient reversed-phase UPLC method was developed for simultaneous determination and separation of impurities and degradation products from drug product. The chromatographic separation was performed on acquity UPLC BEH C18 column (50 mm×2.1 mm, 1.7 µm) using gradient elution. Other UPLC parameters which were optimised are flow rate, 0.7 mL/min; detection wavelength, 220 nm; column oven temperature, 40°C and injection volume 7 µL. Stability indicating capability was established by forced degradation experiments and separation of known degradation products. The method was validated as per International Conference on Harmonization (ICH) guideline. For all impurities and mesalamine, LOQ (limit of quantification) value was found precise with RSD (related standard daviation) of less than 2.0%. In essence, the present study provides an improved low detection limit and lower run time for evaluation of pharmaceutical quality of mesalamine delayed-release formulation. Moreover, the developed method was successfully applied for quantification of impurities and degradation products in mesalamine delayed-release formulation. The same method can also be used for determination of related substances from mesalamine drug substance.


INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (02) ◽  
pp. 34-39
Author(s):  
M Puranik ◽  
◽  
P. G. Yeole ◽  
S. J. Wadher

The stability of pharmaceutical products plays an important role from the economical point of view. There are not many studies that report about the stability of drugs past their expiration dates. The objective of the current study was to determine tablet content and perform dissolution test of expired tablets of amlodipine besylate and tablets where expiry date has not exceeded and to develop simple, accurate, sensitive and stability indicating RP-HPLC method for the determination of per cent drug remained of Amlodipine besylate in the presence of its degradation products in bulk drug, expired tablets and tablets whose expiry date has not been exceeded. Drug was subjected to all stress conditions such as hydrolysis (acidic and alkaline), oxidation (3% H2O2 v/v), photolysis, thermal degradation and humidity study. Content determination was performed using spectrophotometric and RP-HPLC method; the per cent of dissolved substance from tablets during dissolution test was performed using spectrophotometric method and detection was made at 239 nm. All stressed samples were successfully analysed on C18 column using mobile phase phosphate buffer pH 3.5 (50mM): methanol: acetonitrile in the ratio of 30:60:10 v/v/v. A flow rate was maintained at 1.5 ml/min and detection was made at 240 nm. The proposed methods were validated with regard to linearity, sensitivity, and intermediate accuracy and precision. No discrepancies between the results of determination and the declared values range for all the analysed tablets were observed. The results of performed study might suggest that storage of analysed batches of tablets over time period exceeding the expiry date given by the manufacturer did not influence their contents.


Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4430
Author(s):  
Anna Gumieniczek ◽  
Anna Berecka-Rycerz ◽  
Tomasz Mroczek ◽  
Krzysztof Wojtanowski

Firstly, metformin and repaglinide were degraded under high temperature/humidity, UV/VIS light, in different pH and oxidative conditions. Secondly, a new validated LC-UV method was examined, as to whether it validly determined these drugs in the presence of their degradation products and whether it is suitable for estimating degradation kinetics. Finally, the respective LC-MS method was used to identify the degradation products. In addition, using FT-IR method, the stability of metformin and repaglinide was scrutinized in the presence of polyvinylpyrrolidone (PVP), mannitol, magnesium stearate, and lactose. Significant degradation of metformin, following the first order kinetics, was observed in alkaline medium. In the case of repaglinide, the most significant and quickest degradation, following the first order kinetics, was observed in acidic and oxidative media (0.1 M HCl and 3% H2O2). Two new degradation products of metformin and nine new degradation products of repaglinide were detected and identified when the stressed samples were examined by our LC-MS method. What is more, the presence of PVP, mannitol, and magnesium stearate proved to affect the stability of metformin, while repaglinide stability was affected in the presence of PVP and magnesium stearate.


Author(s):  
Adriane Lettnin Roll Feijó ◽  
Fernanda Macke Hellwig ◽  
Clésio Soldateli Paim ◽  
Marcelo Donadel Malesuik

This study aimed to develop and validate a stability-indicating liquid chromatography method for the determination of tirofiban hydrochloride and two synthetic impurities (impurity A and impurity C). The method utilizes a RP-18 column (250 mm × 4.6 mm; 5 μm) with the PDA detector for quantitation. A mixture of triethylamine 0.1% (acidified to pH 5.5 with phosphoric acid) and acetonitrile was used as the mobile phase at a flow rate of 1 mL min−1 with gradient elution. The method presented satisfactory linearity, precision, accuracy and robustness, as well as low limits of detection and quantification, which demonstrate sensitivity in the determination of tirofiban and impurities A and C. It was selective for the determination of the drug and impurities analysed, without interference of the degradation products generated under forced conditions, demonstrating the stability-indicating capacity of the proposed method. Tirofiban showed to be practically stable to oxidative (30% H2O2 for 24 h) and thermal (75 ºC for 24 h) conditions, but presented degradation to UVA light and acid hydrolysis, obeying the first order kinetics for both. In this way, it can be used as a stability-indicating method in the quality control of the raw material of tirofiban hydrochloride, as well as of the finished product. The obtained results demonstrate the importance of deepening the studies in this area, in order to guarantee the quality of commercialized pharmaceutical products.


2011 ◽  
Vol 94 (6) ◽  
pp. 1800-1806 ◽  
Author(s):  
Arivozhi Mohan ◽  
Hitesh B Patel ◽  
Dhandayutham Saravanan

Abstract A simple isocratic, RP-ultra-performance LC method was developed and validated for the determination of lacidipine, three process impurities formed during synthesis, and three degradation products present in drug substance and the drug product. An efficient chromatographic separation was achieved on an Acquity BEH C18 column using pH 4.5 ammonium acetate–acetic acid buffer–methanol (70 + 30, v/v) mobile phase. The monitoring wavelength was 240 nm, and the flow rate 0.25 mL/min. Forced degradation studies using acid, alkali, peroxide, water, heat, and light were conducted, and all impurities were separated. The method was validated successfully for specificity, precision, linearity, accuracy, LOD, LOQ, and robustness, according to International Conference on Harmonization guidelines. The linearity of the calibration curve for lacidipine and each impurity was found to be very good (r2 > 0.999). This method is shown to be suitable for analysis of lacidipine to evaluate the quality of drug substance and a drug product.


Author(s):  
Margareth Gallo ◽  
Diogo do Nascimento ◽  
Nelson Nunes ◽  
Flávia de Sousa ◽  
Janine Boniatti ◽  
...  

This study aimed to develop a reliable stability-indicating method (SIM) for amoxicillin 500 mg capsules (DP-drug product). A literature review addressing amoxicillin (AMX; DS-drug substance) forced degradation studies and the existing SIMs was conducted to verify the most significant outcomes. Subsequently, the forced degradation of DP and DS was carried out following the Brazilian Health Surveillance Agency (ANVISA) guidelines, including thermal degradation (dry and wet heat), acidic and alkaline hydrolyses, hydrogen peroxide oxidation, reaction with copper, and photodegradation. Both DS and DP were more susceptible to 0.015 M NaOH, resulting in approximately 50% degradation. AMX DS and DP were not significantly photodegraded, but some degradation products (PDegs) showed susceptibility to light exposure. Thermodegraded samples showing ≥ 10% degradation exhibited modified profiles in thermogravimetric (TG) and differential scanning calorimetric (DSC) analyses. The X-ray powder diffraction patterns (XRPD) of DS samples exposed to dry and wet heat displayed complete amorphization of AMX, attesting to the occurrence of physical degradation concomitantly with chemical degradation, which can alter the drug’s bioavailability. In contrast, the thermodegraded DP samples exhibited intact AMX crystals interspersed with the amorphous form, perhaps partly protected by the excipient. The validated SIM was able to detect and quantify about 80 PDegs.


2020 ◽  
Vol 11 (3) ◽  
pp. 3933-3941
Author(s):  
Supriya Reddy K ◽  
Chandan R. S. ◽  
Sai Charan A ◽  
Akshay N

A Specific, Linear and Precise reversed phase- HPLC was developed for the simultaneous estimation of Metformin HCl and Empagliflozin and the column used is Zorbax SB Phenyl with length, Internal diameter and Particle size of 250mm, 4.6 mm and 5µm respectively. The Mobile phase is Phosphate buffer: ACN: Methanol in ratio 45:25:30. 1.0 ml/min was the used flow rate and the wavelength was adjusted to 220nm for detection. The retention time for Empagliflozin was found to be 5.5min and for Metformin was 9.3min. Both the APIs exhibited good linearity revealing correlation coefficient(R) of 0.9999. The percentage recoveries for Metformin and Empagliflozin was found to be 100.0 – 100.9% and 100.3 – 102.4% respectively which was found to be within the limit. Forced degradation studies were performed and the developed method has suitable specificity as no interference is observed with impurity spiked sample and placebo of Drug Product. The proposed drug products were subjected to various types of stress conditions according to ICH Q1 guidelines like acidic, alkaline, neutral, peroxide, and Thermal conditions. The degradation products were well resolved from the main peaks , thus indicating the stability- indicating nature of the method. The method was validated with respect to system suitability, linearity, accuracy, precision and robustness according to ICH guidelines and the proposed RP-HPLC Method was accurate, precise and linear for the simultaneous determination of Metformin and Empagliflozin in bulk and pharmaceutical formulations.


2020 ◽  
Vol 10 (2-s) ◽  
pp. 149-155
Author(s):  
Rajveer Bhaskar ◽  
Monika Ola ◽  
Vinit Agnihotri ◽  
Arjun Chavan ◽  
Harpalsing Girase

The stability of a new drug substances and new drug products is a vital parameter which may affect purity, safety & potency. Changes in drug stability can threat patient safety by formation of toxic degradation products or deliver to lower dose than expected. Therefore it is to know the purity profile & behaviour of a drug substances under the various environmental condition.  Forced Degradation studies show the chemical behavior of the molecule which in turn helps in the  development of  new formulation & package . Degradation study is required to the design of a regulatory compliant stability program for the both drug substances & products, and formalized as a regulatory requirement in ICH Guideline Q1A in 1993. Forced degradation studies (chemical and physical stress testing) of new chemical entities and drug product which is required to develop and demonstrate the specificity i.e stability indicating method. Forced degradation studies used to determination of the degradation pathways and degradation product of drug substances i.e during storage, development, manufacturing and packaging Thus , this review discusses the current trends in performance of forced degradation studies by provide the information about strategy for conducting the studies of forced degradation Keywords: - Regulatory Guidelines (ICH, FDA, EMA), Degradation condition, Forced degradation, Degradation product.


Sign in / Sign up

Export Citation Format

Share Document