scholarly journals Enhancement of the Detection Performance of Paper-Based Analytical Devices by Nanomaterials

Molecules ◽  
2022 ◽  
Vol 27 (2) ◽  
pp. 508
Author(s):  
Renzhu Pang ◽  
Qunyan Zhu ◽  
Jia Wei ◽  
Xianying Meng ◽  
Zhenxin Wang

Paper-based analytical devices (PADs), including lateral flow assays (LFAs), dipstick assays and microfluidic PADs (μPADs), have a great impact on the healthcare realm and environmental monitoring. This is especially evident in developing countries because PADs-based point-of-care testing (POCT) enables to rapidly determine various (bio)chemical analytes in a miniaturized, cost-effective and user-friendly manner. Low sensitivity and poor specificity are the main bottlenecks associated with PADs, which limit the entry of PADs into the real-life applications. The application of nanomaterials in PADs is showing great improvement in their detection performance in terms of sensitivity, selectivity and accuracy since the nanomaterials have unique physicochemical properties. In this review, the research progress on the nanomaterial-based PADs is summarized by highlighting representative recent publications. We mainly focus on the detection principles, the sensing mechanisms of how they work and applications in disease diagnosis, environmental monitoring and food safety management. In addition, the limitations and challenges associated with the development of nanomaterial-based PADs are discussed, and further directions in this research field are proposed.

2013 ◽  
Vol 421 ◽  
pp. 334-336 ◽  
Author(s):  
Yong Qiang Cheng ◽  
Cui Lian Guo ◽  
Yang Li ◽  
Bin Zhao ◽  
Xiao Cui

Paper-based microfluidic devices have recently received increasing attention as a potential platform for its low cost, portability and excellent compatibility with biological samples. A variety of fabrication technologies were employed, including simple photolithography, wax plotting, printing, inkjet etching, plasma etching and so on. Meanwhile, the potential applications of paper-based microfluidic devices in diagnostic, point-of-care (POC), and environmental monitoring were reported. We review the recent progress of fabrication technologies and the applications of paper-based microfluidic devices.


2020 ◽  
Vol 2 ◽  
Author(s):  
Ritika Gupta ◽  
Poonam Sagar ◽  
Nitesh Priyadarshi ◽  
Sunaina Kaul ◽  
Rajat Sandhir ◽  
...  

The emergence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) as a pandemic has been validated as an extreme clinical calamity and has affected several socio-economic activities globally. Proven transmission of this virus occurs through airborne droplets from an infected person. The recent upsurge in the number of infected individuals has already exceeded the number of intensive care beds available to patients. These extraordinary circumstances have elicited the need for the development of diagnostic tools for the detection of the virus and, hence, prevent the spread of the disease. Early diagnosis and effective immediate treatment can reduce and prevent an increase in the number of cases. Conventional methods of detection such as quantitative real-time polymerase chain reaction and chest computed tomography scans have been used extensively for diagnostic purposes. However, these present several challenges, including prolonged assay requirements, labor-intensive testing, low sensitivity, and unavailability of these resources in remote locations. Such challenges urgently require fast, sensitive, and accurate diagnostic techniques for the timely detection and treatment of coronavirus disease 2019 (COVID-19) infections. Point-of-care biosensors that include paper- and chip-based diagnostic systems are rapid, cost-effective, and user friendly. In this article nanotechnology-based potential biosensors for SARS-CoV-2 diagnosis are discussed with particular emphasis on a lateral flow assay, a surface-enhanced Raman scattering-based biosensor, a localized surface plasmon resonance-based biosensor, Förster resonance energy transfer, an electrochemical biosensor, and artificial intelligence-based biosensors. Several biomolecules, such as nucleic acids, antibodies/enzymes, or aptamers, can serve as potential detection molecules on an appropriate platform, such as graphene oxide, nanoparticles, or quantum dots. An effective biosensor can be developed by using appropriate combinations of nanomaterials and technologies.


2020 ◽  
Author(s):  
Mustafa Sen

Paper-based sensors have great potential to be used in a variety of fields ranging from environmental monitoring to clinical and point-of-care diagnostics. These sensors are disposable, cost effective, flexible and easy to use. The aim of this study was to fabricate a low cost, disposable, reliable and easy to use paper-based electrochemical sensor and its electrochemical modification with nanostructured Au for glucose detection in alkaline solutions.


2019 ◽  
Vol 4 ◽  
pp. 1
Author(s):  
Arjun Chandna ◽  
Lisa J. White ◽  
Tiengkham Pongvongsa ◽  
Mayfong Mayxay ◽  
Paul N. Newton ◽  
...  

Background: Across Southeast Asia, declining malaria incidence poses a challenge for healthcare providers, in how best to manage the vast majority of patients with febrile illnesses who have a negative malaria test. In rural regions, where the majority of the population reside, empirical treatment guidelines derived from central urban hospitals are often of limited relevance. In these settings, health workers with limited training deliver care, often without any laboratory diagnostic support. In this paper, we model the impact of point-of-care C-reactive protein testing to inform the decision to prescribe antibiotics and regional surveillance data to inform antibiotic selection, and then stimulate thesubsequent impact on mortality from febrile illnesses, rooted in the real-world context of rural Savannakhet province, southern Laos. Methods: Our model simulates 100 scenarios with varying quarterly incidence of six key pathogens known to be prevalent in rural Laos. In the simulations, community health workers either prescribe antibiotics in-line with current practice as documented in health facilities in rural Laos, or with the aid of the two interventions. We provide cost-effectiveness estimates for each strategy alone and then for an integrated approach using both interventions. Results: We find that each strategy is predicted to be highly cost-effective, and that the combined approach is predicted to result in the biggest reduction in mortality (averting a predicted 510 deaths per year in rural Savannakhet, a 28% reduction compared to standard practice) and is highly cost-effective, with an incremental cost-effectiveness ratio of just USD $66 per disability-adjusted life year averted. Conclusions: Substantial seasonal variation in the predicted optimal empirical antibiotic treatment for febrile illness highlights the benefits of up-to-date information on regional causes of fever. In this modelling analysis, an integrated system incorporating point-of-care host biomarker testing and regional surveillance data appears highly cost-effective, and may warrant piloting in a real-life setting.


2019 ◽  
Vol 4 ◽  
pp. 1 ◽  
Author(s):  
Arjun Chandna ◽  
Lisa J. White ◽  
Tiengkham Pongvongsa ◽  
Mayfong Mayxay ◽  
Paul N. Newton ◽  
...  

Background: Across Southeast Asia, declining malaria incidence poses a challenge for healthcare providers, in how best to manage the vast majority of patients with febrile illnesses who have a negative malaria test. In rural regions, where the majority of the population reside, empirical treatment guidelines derived from central urban hospitals are often of limited relevance. In these settings, relatively untrained health workers deliver care, often without any laboratory diagnostic support. In this paper, our aim was to model the impact on mortality from febrile illness of using point-of-care C-reactive protein testing to inform the decision to prescribe antibiotics and regional surveillance data to inform antibiotic selection, rooted in the real-world context of rural Savannakhet province, southern Laos. Methods: Our model simulates 100 scenarios with varying quarterly incidence of six key pathogens known to be prevalent in rural Laos. In the simulations, community health workers either prescribe antibiotics in-line with current practice as documented in health facilities in rural Laos, or with the aid of the two interventions. We provide cost-effectiveness estimates for each strategy alone and then for an integrated approach using both interventions. Results: We find that each strategy alone is predicted to be highly cost-effective, and that the combined approach is predicted to result in the biggest reduction in mortality (averting a predicted 510 deaths per year in rural Savannakhet, a 28% reduction compared to standard practice) and is highly cost-effective, with an incremental cost-effectiveness ratio of just $66 per disability-adjusted life year averted. Conclusions: Substantial seasonal variation in the predicted optimal empirical antibiotic treatment for febrile illness highlights the benefits of up-to-date information on regional causes of fever. In this modelling analysis, an integrated system incorporating point-of-care host biomarker testing and regional surveillance data appears highly cost-effective, and may warrant piloting in a real-life setting.


The Analyst ◽  
2021 ◽  
Author(s):  
Supriya Yadav ◽  
Niti Nipun Sharma ◽  
Jamil Akhtar

Cost-effective rapid diagnosis of infectious diseases is an essential and important factor for curing of such diseases on global public health care picture. Owing to lack of poor infrastructure and...


2020 ◽  
Author(s):  
Mustafa Sen

Paper-based sensors have great potential to be used in a variety of fields ranging from environmental monitoring to clinical and point-of-care diagnostics. These sensors are disposable, cost effective, flexible and easy to use. The aim of this study was to fabricate a low cost, disposable, reliable and easy to use paper-based electrochemical sensor and its electrochemical modification with nanostructured Au for glucose detection in alkaline solutions.


2017 ◽  
Author(s):  
Xuan Weng ◽  
Suresh Neethirajan

AbstractNoroviruses (NoV) are the leading cause of outbreak of acute gastroenteritis worldwide. A substantial effort has been made in the development of analytical devices for rapid and sensitive food safety monitoring via the detection of foodborne bacteria, viruses and parasites. Conventional analytical approaches for noroviruses suffer from some critical weaknesses: labor-intensive, time-consuming, and relatively low sensitivity. In this study, we developed a rapid and highly sensitive biosensor towards point-of-care device for noroviruses based on 6-carboxyfluorescein (6-FAM) labeled aptamer and nanomaterials, multi-walled carbon nanotubes (MWCNTs) and graphene oxide (GO). In an assay, the fluorescence of 6-FAM labeled aptamer was quenched by MWCNTs or GO via fluorescence resonance energy transfer (FRET). In the presence of norovirus, the fluorescence would be recovered due to the release of the 6-FAM labeled aptamer from MWCNTs or GO. An easy-to-make paper-based microfluidic platform made by nitrocellulose membrane was used to conduct the assay. The quantitative detection of norovirus virus-like particles (NoV VLPs) was successfully performed. A linear range of 0-12.9 μg/mL with a detection limit of 40 pM and 30 pM was achieved for the MWCNTs and GO based paper sensors, respectively. The results suggested the developed paper-based microfluidic device is simple, cost-effective and holds the potential of rapid in situ visual determination for noroviruses with remarkable sensitivity and specificity, which provides a new way for early identification of NoV and thereby an early intervention for preventing the spread of an outbreak.


2020 ◽  
Author(s):  
Mustafa Sen

Paper-based sensors have great potential to be used in a variety of fields ranging from environmental monitoring to clinical and point-of-care diagnostics. These sensors are disposable, cost effective, flexible and easy to use. The aim of this study was to fabricate a low cost, disposable, reliable and easy to use paper-based electrochemical sensor and its electrochemical modification with nanostructured Au for glucose detection in alkaline solutions.


Diagnostics ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1352
Author(s):  
Darius Riziki Martin ◽  
Nicole Remaliah Sibuyi ◽  
Phumuzile Dube ◽  
Adewale Oluwaseun Fadaka ◽  
Ruben Cloete ◽  
...  

The transmission of Tuberculosis (TB) is very rapid and the burden it places on health care systems is felt globally. The effective management and prevention of this disease requires that it is detected early. Current TB diagnostic approaches, such as the culture, sputum smear, skin tuberculin, and molecular tests are time-consuming, and some are unaffordable for low-income countries. Rapid tests for disease biomarker detection are mostly based on immunological assays that use antibodies which are costly to produce, have low sensitivity and stability. Aptamers can replace antibodies in these diagnostic tests for the development of new rapid tests that are more cost effective; more stable at high temperatures and therefore have a better shelf life; do not have batch-to-batch variations, and thus more consistently bind to a specific target with similar or higher specificity and selectivity and are therefore more reliable. Advancements in TB research, in particular the application of proteomics to identify TB specific biomarkers, led to the identification of a number of biomarker proteins, that can be used to develop aptamer-based diagnostic assays able to screen individuals at the point-of-care (POC) more efficiently in resource-limited settings.


Sign in / Sign up

Export Citation Format

Share Document