scholarly journals Functionalization of Commercial Electrospun Veils with Zinc Oxide Nanostructures

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 418
Author(s):  
Irene Bavasso ◽  
Francesca Sbardella ◽  
Maria Paola Bracciale ◽  
Matteo Lilli ◽  
Jacopo Tirillò ◽  
...  
Keyword(s):  
Mechanical Stability ◽  
Treatment Time ◽  
Uv Light ◽  
Zno Nanorods ◽  
Electrospun Nanofibers ◽  
Treatment Method ◽  
Zinc Oxide Nanostructures ◽  
Overall Treatment Time ◽  
Growth Step ◽  
Synthesis Conditions

The present research is focused on the synthesis of hexagonal ZnO wurtzite nanorods for the decoration of commercially available electrospun nylon nanofibers. The growth of ZnO was performed by a hydrothermal technique and for the first time on commercial electrospun veils. The growth step was optimized by adopting a procedure with the refresh of growing solution each hour of treatment (Method 1) and with the maintenance of a specific growth solution volume for the entire duration of the treatment (Method 2). The overall treatment time and volume of solution were also optimized by analyzing the morphology of ZnO nanostructures, the coverage degree, the thermal and mechanical stability of the obtained decorated electrospun nanofibers. In the optimal synthesis conditions (Method 2), hexagonal ZnO nanorods with a diameter and length of 53.5 nm ± 5.7 nm and 375.4 nm ± 37.8 nm, respectively, were obtained with a homogeneous and complete coverage of the veils. This easily scalable procedure did not damage the veils that could be potentially used as toughening elements in composites to prevent delamination onset and propagation. The presence of photoreactive species makes these materials ideal also as environmentally friendly photocatalysts for wastewater treatment. In this regard, photocatalytic tests were performed using methylene blue (MB) as model compound. Under UV light irradiation, the degradation of MB followed a first kinetic order data fitting and after 3 h of treatment a MB degradation of 91.0% ± 5.1% was achieved. The reusability of decorated veils was evaluated and a decrease in photocatalysis efficiency was detected after the third cycle of use.

Electron microscopy of keratinocytes cultured on a collagen substrate used as an allograft for the treatment of chronic wounds

1992 ◽  
Vol 50 (2) ◽  
pp. 1104-1105
Author(s):  
Debby A. Jennings ◽  
Michael J. Morykwas ◽  
Louis C. Argenta
Keyword(s):  
Electron Microscopy ◽  
Cell Suspension ◽  
Single Cell ◽  
Chronic Wounds ◽  
Mechanical Stability ◽  
Uv Light ◽  
Type I ◽  
Single Cell Suspension ◽  
Collagen Substrate ◽  
Dermal Collagen

Grafts of cultured allogenic or autogenic keratlnocytes have proven to be an effective treatment of chronic wounds and burns. This study utilized a collagen substrate for keratinocyte and fibroblast attachment. The substrate provided mechanical stability and augmented graft manipulation onto the wound bed. Graft integrity was confirmed by light and transmission electron microscopy.Bovine Type I dermal collagen sheets (100 μm thick) were crosslinked with 254 nm UV light (13.5 Joules/cm2) to improve mechanical properties and reduce degradation. A single cell suspension of third passage neonatal foreskin fibroblasts were plated onto the collagen. Five days later, a single cell suspension of first passage neonatal foreskin keratinocytes were plated on the opposite side of the collagen. The grafts were cultured for one month.The grafts were fixed in phosphate buffered 4% formaldehyde/1% glutaraldehyde for 24 hours. Graft pieces were then washed in 0.13 M phosphate buffer, post-fixed in 1% osmium tetroxide, dehydrated, and embedded in Polybed 812.

Synthesis of HTCMgFe for the degradation of indigo carmine through heterogeneous photo-Fenton treatment

MRS Advances ◽  
2020 ◽  
Vol 5 (62) ◽  
pp. 3273-3282
Author(s):  
I. Cosme-Torres ◽  
M.G. Macedo-Miranda ◽  
S.M. Martinez-Gallegos ◽  
J.C. González-Juárez ◽  
G. Roa-Morales ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Treatment Time ◽  
Uv Light ◽  
Indigo Carmine ◽  
Oh Radicals ◽  
Absorption Bands ◽  
Chromophore Group ◽  
X Ray ◽  
Catalytic Sites ◽  
Scanning Electron

AbstractThe heterogeneous catalyst HTCMgFe was used in the degradation of the IC, through the heterogeneous photo-fenton treatment, this material in combination with H2O2 and UV light degraded the dye in 30 min at pH 3. As the amount of HTCMgFe increases the degradation it was accelerated because there are more active catalytic sites of Fe2+ on the surface of the material, which generates a greater amount of •OH radicals. The HTCMgFe was characterized by infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray energy dispersive elemental analysis (EDS). The UV-vis spectrum shows that the absorption bands belonging to the chromophore group of the IC disappear as the treatment time passes, indicating the degradation of the dye.

scholarly journals Recrystallization of CsPbBr3 Nanoparticles in Fluoropolymer Nonwoven Mats for Down- and Up-Conversion of Light

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 412
Author(s):  
Vladimir Neplokh ◽  
Daria I. Markina ◽  
Maria Baeva ◽  
Anton M. Pavlov ◽  
Demid A. Kirilenko ◽  
...  
Keyword(s):  
Mechanical Stability ◽  
Uv Light ◽  
Visible Spectral Range ◽  
High Quantum Yield ◽  
Environmental Robustness ◽  
Nonwoven Mats ◽  
Down Conversion ◽  
Green Photoluminescence ◽  
Significant Attention ◽  
Narrow Emission

Inorganic halides perovskite CsPbX3 (X = Cl, Br, and I or mixed halide systems Cl/Br and Br/I) nanoparticles are efficient light-conversion objects that have attracted significant attention due to their broadband tunability over the entire visible spectral range of 410–700 nm and high quantum yield of up to 95%. Here, we demonstrate a new method of recrystallization of CsPbBr3 nanoparticles inside the electrospun fluoropolymer fibers. We have synthesized nonwoven tetrafluoroethylene mats embedding CsPbBr3 nanoparticles using inexpensive commercial precursors and syringe electrospinning equipment. The fabricated nonwoven mat samples demonstrated both down-conversion of UV light to 506 nm and up-conversion of IR femtosecond laser radiation to 513 nm green photoluminescence characterized by narrow emission line-widths of 35 nm. Nanoparticle formation inside nonwoven fibers was confirmed by TEM imaging and water stability tests controlled by fluorimetry measurements. The combination of enhanced optical properties of CsPbBr3 nanoparticles and mechanical stability and environmental robustness of highly deformable nonwoven fluoropolymer mats is appealing for flexible optoelectronic applications, while the industry-friendly fabrication method is attractive for commercial implementations.

scholarly journals Intermolar Mandibular Distraction Osteogenesis—A Preliminary Report

2021 ◽  
Vol 11 (9) ◽  
pp. 4118
Author(s):  
Suen A. N. Lie ◽  
Britt H. B. T. Engelen ◽  
Veronique C. M. L. Timmer ◽  
Nico M. P. Vrijens ◽  
Paolo Asperio ◽  
...  
Keyword(s):  
Distraction Osteogenesis ◽  
Treatment Time ◽  
Average Length ◽  
Case Series ◽  
Growth Spurt ◽  
Overall Treatment Time ◽  
Mandibular Distraction ◽  
Mandibular Distraction Osteogenesis ◽  
Root Fractures

Background: Dental Class II is the most common indication for combined orthodontic-orthognathic treatment. Intermolar mandibular distraction osteogenesis (IMDO) treatment was performed during the growth spurt, to avoid surgery at a later age. The aim of this study is to present our first experience with IMDO. Methods: This is a retrospective case series of patients who underwent an IMDO. All patients showed mandibular retrognathism, and orthodontic treatment with functional appliances was not successful. Results: In total, 20 patients (mean age of 14.8 years (SD = 0.9 ys) were included. All patients achieved a Class I occlusion. An average length gain of 9.6 mm (SD = 3.7 mm) was reached. In one patient an abscess occurred. Nine patients presented with root fractures of the second molar; three were lost, one treated endodontically. The average time between insertion and removal of the distractors was 4.6 months (SD = 1.5 mths). In one case a premature consolidation was seen. Conclusion: We achieved satisfactory results with IMDO, although undesirable effects occurred. An advantage is the manageable overall treatment time. Open questions concern the occurrence of root fractures. Furthermore, the question of long-term stability is open. The question of dynamic distraction treatment in relation to temporomandibular joint changes can only be answered in the long term.

Primary Human Liver Cells as Source for Modular Extracorporeal Liver Support - a Preliminary Report

2002 ◽  
Vol 25 (10) ◽  
pp. 1001-1005 ◽  
Author(s):  
I.M. Sauer ◽  
K. Zeilinger ◽  
N. Obermayer ◽  
G. Pless ◽  
A. Grünwald ◽  
...  
Keyword(s):  
Human Liver ◽  
Treatment Time ◽  
Liver Perfusion ◽  
Cell Mass ◽  
Liver Weight ◽  
Liver Cells ◽  
Liver Support ◽  
Overall Treatment Time ◽  
Human Liver Cells ◽  
Extracorporeal Liver Support

Cell-based extracorporeal liver support is an option to assist or replace the failing organ until regeneration or until transplantation can be performed. The use of porcine cells or tumor cell lines is controversial. Primary human liver cells, obtained from explanted organs found to be unsuitable for transplantation, are a desirable cell source as they perform human metabolism and regulation. The Modular Extracorporeal Liver Support (MELS) concept combines different extracorporeal therapy units, tailored to suit the individual and intra-individual clinical needs of the patient. A multi-compartment bioreactor (CellModule) is loaded with human liver cells obtained by 5-step collagenase liver perfusion. A cell mass of 400 g – 600 g enables the clinical application of a liver lobe equivalent hybrid organ. A detoxification module enables single pass albumin-dialysis via a standard high-flux dialysis filter, and continuous venovenuous hemodiafiltration may be included if required. Cells from 54 human livers have been isolated (donor age: 56 ± 13 years, liver weight: 1862 ± 556 g resulting in a viability of 55.0 ± 15.9%). These grafts were not suitable for LTx, due to steatosis (54%), cirrhosis (15%), fibrosis (9%), and other reasons (22%). Out of 36 prepared bioreactors, 10 were clinically used to treat 8 patients with liver failure. The overall treatment time was 7–144 hours. No adverse events were observed. Initial clinical applications of the bioreactor evidenced the technical feasibility and safety of the system.

scholarly journals Orthodontic treatment of a particular subgroup of children with special health care needs, children with craniofacial anomalies: An analysis of treatment length and clinical outcome

2015 ◽  
Vol 86 (1) ◽  
pp. 115-120 ◽  
Author(s):  
Marco Taddei ◽  
Giovanni D'Alessandro ◽  
Franco Amunni ◽  
Gabriela Piana
Keyword(s):  
Orthodontic Treatment ◽  
Treatment Time ◽  
Special Health Care Needs ◽  
Craniofacial Anomalies ◽  
Health Care Needs ◽  
Care Needs ◽  
Overall Treatment Time ◽  
Special Health Care ◽  
Treatment Start ◽  
Special Health

ABSTRACT Objective:  To analyze any differences in the orthodontic treatment between children belonging to a particular subgroup of subjects with special health care needs (SHCN), children with craniofacial anomalies (CFA), and children not diagnosed with SHCN (NO SHCN). Materials and Methods:  The study sample consisted of 50 children with SHCN and a confirmed diagnosis of CFA (SHCN/CFA); the control group consisted of 50 NO SHCN children fully matched for age, gender, and type of appliance used. The differences between the two groups were analyzed retrospectively: pre-, posttreatment scores, and score reduction of the Peer Assessment Rating Index (PAR), dental health component (DHC), and aesthetic component (AC) of Orthodontic Treatment Need Index (IOTN), number of appointments, number of simple or complex chair-time appointments, overall treatment time, and age at treatment start and end. Results:  There were no statistically significant differences between the SHCN/CFA and NO SHCN groups for number of appointments, overall treatment time, age at treatment start, and age at treatment end (P  =  .682, .458, .535, and .675, respectively). There were statistically significant differences between groups in PAR, DHC, AC pre- and posttreatment, and number of simple and complex chair-time appointments (P  =  .030 and .000; .020 and .023; .000 and .000; .043; and .037; respectively). The reduction of PAR, DHC, and AC scores was not significantly different between groups (P  =  .060, .765, and .825, respectively). Conclusion:  The treatment of children with SHCN, in general, and with CFA, in particular, on the one hand involves a higher rate of using complex chair time appointments and an inferior treatment outcome, by the other side implies an overall treatment time and a reduction of PAR, DHC or AC scores similar to the treatment of children not diagnosed with SHCN.

Sign in / Sign up

Export Citation Format

Share Document