scholarly journals Assessing Genotoxicity of Ten Different Engineered Nanomaterials by the Novel Semi-Automated FADU Assay and the Alkaline Comet Assay

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 220
Author(s):  
Sarah May ◽  
Cordula Hirsch ◽  
Alexandra Rippl ◽  
Alexander Bürkle ◽  
Peter Wick
Keyword(s):  
Comet Assay ◽  
Dna Fragmentation ◽  
Genetic Material ◽  
Early Time ◽  
The Novel ◽  
Potential Structure ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
I Cells

Increased engineered nanomaterial (ENM) production and incorporation in consumer and biomedical products has raised concerns about the potential adverse effects. The DNA damaging capacity is of particular importance since damaged genetic material can lead to carcinogenesis. Consequently, reliable and robust in vitro studies assessing ENM genotoxicity are of great value. We utilized two complementary assays based on different measurement principles: (1) comet assay and (2) FADU (fluorimetric detection of alkaline DNA unwinding) assay. Assessing cell viability ruled out false-positive results due to DNA fragmentation during cell death. Potential structure–activity relationships of 10 ENMs were investigated: three silica nanoparticles (SiO2-NP) with varying degrees of porosity, titanium dioxide (TiO2-NP), polystyrene (PS-NP), zinc oxide (ZnO-NP), gold (Au-NP), graphene oxide (GO) and two multi-walled carbon nanotubes (MWNT). SiO2-NPs, TiO2-NP and GO were neither cytotoxic nor genotoxic to Jurkat E6-I cells. Quantitative interference corrections derived from GO results can make the FADU assay a promising screening tool for a variety of ENMs. MWNT merely induced cytotoxicity, while dose- and time-dependent cytotoxicity of PS-NP was accompanied by DNA fragmentation. Hence, PS-NP served to benchmark threshold levels of cytotoxicity at which DNA fragmentation was expected. Considering all controls revealed the true genotoxicity for Au-NP and ZnO-NP at early time points.

scholarly journals Profiling of Sub-Lethal in Vitro Effects of Multi-Walled Carbon Nanotubes Reveals Changes in Chemokines and Chemokine Receptors

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 883 ◽  
Author(s):  
Sandeep Keshavan ◽  
Fernando Torres Andón ◽  
Audrey Gallud ◽  
Wei Chen ◽  
Knut Reinert ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Chemokine Receptors ◽  
Research Centre ◽  
Target Cells ◽  
Joint Research ◽  
Chemokine Signaling ◽  
Multi Walled Carbon Nanotubes ◽  
Downstream Analysis ◽  
Walled Carbon Nanotubes

Engineered nanomaterials are potentially very useful for a variety of applications, but studies are needed to ascertain whether these materials pose a risk to human health. Here, we studied three benchmark nanomaterials (Ag nanoparticles, TiO2 nanoparticles, and multi-walled carbon nanotubes, MWCNTs) procured from the nanomaterial repository at the Joint Research Centre of the European Commission. Having established a sub-lethal concentration of these materials using two human cell lines representative of the immune system and the lungs, respectively, we performed RNA sequencing of the macrophage-like cell line after exposure for 6, 12, and 24 h. Downstream analysis of the transcriptomics data revealed significant effects on chemokine signaling pathways. CCR2 was identified as the most significantly upregulated gene in MWCNT-exposed cells. Using multiplex assays to evaluate cytokine and chemokine secretion, we could show significant effects of MWCNTs on several chemokines, including CCL2, a ligand of CCR2. The results demonstrate the importance of evaluating sub-lethal concentrations of nanomaterials in relevant target cells.

scholarly journals Biocompatibility Characteristics of Titanium Coated with Multi Walled Carbon Nanotubes—Hydroxyapatite Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 224 ◽  
Author(s):  
Jung-Eun Park ◽  
Yong-Seok Jang ◽  
Tae-Sung Bae ◽  
Min-Ho Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sol Gel ◽  
Pure Titanium ◽  
Cell Proliferation And Differentiation ◽  
Transmission Electron ◽  
Proliferation And Differentiation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi walled carbon nanotubes-hydroxyapatite (MWCNTs-HA) with various contents of MWCNTs was synthesized using the sol-gel method. MWCNTs-HA composites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). HA particles were generated on the surface of MWCNT. Produced MWCNTs-HA nanocomposites were coated on pure titanium (PT). Characteristic of the titanium coated MWCNTs-HA was evaluated by field-emission scanning electron microscopy (FE-SEM) and XRD. The results show that the titanium surface was covered with MWCNTs-HA nanoparticles and MWCNTs help form the crystalized hydroxyapatite. Furthermore, the MWCNTs-HA coated titanium was investigated for in vitro cellular responses. Cell proliferation and differentiation were improved on the surface of MWCNT-HA coated titanium.

Bioactive poly(etheretherketone) composite containing calcium polyphosphate and multi-walled carbon nanotubes for bone repair: Mechanical property and in vitro biocompatibility

2018 ◽  
Vol 33 (5) ◽  
pp. 543-557 ◽  
Author(s):  
Jianfei Cao ◽  
Yue Lu ◽  
Hechun Chen ◽  
Lifang Zhang ◽  
Chengdong Xiong
Keyword(s):  
Mechanical Property ◽  
Carbon Nanotubes ◽  
Bone Repair ◽  
Mechanical Performance ◽  
Injection Molding Process ◽  
Molding Process ◽  
Calcium Polyphosphate ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Poly(etheretherketone) exhibits good biocompatibility, excellent mechanical properties, and bone-like stiffness. However, the natural bio-inertness of pure poly(etheretherketone) hinders its applications in biomedical field, especially when direct bone-implant osteo-integration is desired. For developing an alternative biomaterial for load-bearing orthopedic application, combination of bioactive fillers with poly(etheretherketone) matrix is a feasible approach. In this study, a bioactive multi-walled carbon nanotubes/calcium polyphosphate/poly(etheretherketone) composite was prepared through a compounding and injection-molding process for the first time. Bioactive calcium polyphosphate was added to polymer matrix to enhance the bioactivity of the composite, and incorporation of multi-walled carbon nanotubes to composite was aimed to improve both the mechanical property and biocompatibility. Furthermore, the microstructures, surface hydrophilicity, and mechanical property of multi-walled carbon nanotubes/calcium polyphosphate/poly(etheretherketone) composite, as well as the cellular responses of MC3T3-E1 osteoblast cells to this material were investigated. The mechanical testing revealed that mechanical performance of the resulting ternary composite was significantly enhanced by adding the multi-walled carbon nanotubes and the mechanical values obtained were close to or higher than those of human cortical bone. More importantly, cell culture tests showed that initial cell adhesion, cell viability, and osteogenic differentiation of MC3T3-E1 cells were significantly promoted on the multi-walled carbon nanotubes/calcium polyphosphate/poly(etheretherketone) composite. Accordingly, the multi-walled carbon nanotubes/calcium polyphosphate/poly(etheretherketone) composite may be used as a promising bone repair material in dental and orthopedic applications.

scholarly journals Biodegradable multi-walled carbon nanotubes trigger anti-tumoral effects

Nanoscale ◽  
2018 ◽  
Vol 10 (23) ◽  
pp. 11013-11020 ◽  
Author(s):  
E. González-Lavado ◽  
N. Iturrioz-Rodríguez ◽  
E. Padín-González ◽  
J. González ◽  
L. García-Hevia ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Malignant Melanoma ◽  
Solid Tumors ◽  
Mild Oxidation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Mild oxidation treatments improve the in vitro and in vivo macrophage biodegradation of carbon nanotubes that trigger remarkable anti-tumoral effects in malignant melanoma solid tumors produced in mice.

scholarly journals The Application of Multi-Walled Carbon Nanotubes in Bone Tissue Repair Hybrid Scaffolds and the Effect on Cell Growth In Vitro

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 230 ◽  
Author(s):  
Jie Xu ◽  
Xueyan Hu ◽  
Siyu Jiang ◽  
Yiwei Wang ◽  
Roxanne Parungao ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bone Tissue ◽  
Optimal Growth ◽  
Bone Tissue Regeneration ◽  
Proliferation And Differentiation ◽  
Potential Applications ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Hybrid Scaffolds

In this study, composite scaffolds with different multi-walled carbon nanotubes (MWCNTs) content were prepared by freeze-drying. These scaffolds were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), porosity, hydrophilicity, mechanical strength, and degradation. The MWCNTs scaffolds were structurally sound and had porous structures that offered ample space for adherence, proliferation, and differentiation of MC3T3-E1 cells, and also supported the transport of nutrients and metabolic waste. CS/Gel/nHAp/0.3%MWCNTs scaffolds provided the best outcomes in terms of scaffold porosity, hydrophilicity, and degradation rate. However, CS/Gel/nHAp/0.6%MWCNTs scaffolds were found to support the optimal growth, homogenous distribution, and biological activity of MC3T3-E1 cells. The excellent properties of CS/Gel/nHAp/0.6%MWCNTs scaffolds for the adhesion, proliferation, and osteogenesis differentiation of MC3T3-E1 cells in vitro highlights the potential applications of this scaffold in bone tissue regeneration.

Nanohybrid Nanoparticles Based on Chitosan/Functionalized Carbon Nanotubes as Anti-HIV Nanocarrier

NANO ◽  
2015 ◽  
Vol 10 (01) ◽  
pp. 1550010 ◽  
Author(s):  
R. Afshari ◽  
S. Mazinani ◽  
M. Abdouss
Keyword(s):  
Carbon Nanotubes ◽  
Drug Delivery ◽  
Carbon Nanotube ◽  
Drug Delivery Systems ◽  
Drug Loading ◽  
Delivery Systems ◽  
Potential Applications ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Carbon nanotube-natural biopolymer nanovectors have important potential applications in delivery system for drugs and biomolecules. In this work, the use of multi-walled carbon nanotubes (MWCNT) as nanoreservoirs for drug loading and controlled release is demonstrated. We synthesized different carbon nanotube-based drug delivery systems including acid and amide-functionalized MWCNT; chitosan (CS) covalently grafted to functionalized MWCNT and MWCNT-CS nanoparticles (NPs) using an ionotropic gelation method as a sustained-release systems for delivery of Tenofovir (hydrophilic anti-retroviral drug). The prepared NPs as different drug delivery systems were characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). As it is shown, in vitro drug release studies indicated that the cumulative release rate of Tenofovir from MWCNT–CS NPs shows the best result and it reaches the maximum value (90%) after about 120 h. Moreover, comparing to ungrafted CNTs, MWCNT–CS shows high dispersability and long-term stability in aqueous medium which approves the effective solubilization of MWCNT followed by grafting with CS.

Sign in / Sign up

Export Citation Format

Share Document