scholarly journals Ground Calcium Carbonate as a Low Cost and Biosafety Excipient for Solubility and Dissolution Improvement of Praziquantel

Pharmaceutics ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 533 ◽  
Author(s):  
Ana Borrego-Sánchez ◽  
Rita Sánchez-Espejo ◽  
Beatrice Albertini ◽  
Nadia Passerini ◽  
Pilar Cerezo ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Calcium Carbonate ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Limiting Factor ◽  
Scanning Calorimetry ◽  
Interaction Product

Calcium carbonate is an abundant mineral with several advantages to be a successful carrier to improve oral bioavailability of poorly water-soluble drugs, such as praziquantel. Praziquantel is an antiparasitic drug classified in group II of the Biopharmaceutical Classification System hence characterized by high-permeability and low-solubility. Therefore, the dissolution rate is the limiting factor for the gastrointestinal absorption that contributes to the low bioavailability. Consequently, the therapeutic dose of the praziquantel must be high and big tablets and capsules are required, which are difficult to swallow, especially for pediatric and elderly patients. Mixtures of praziquantel and calcium carbonate using solid-solid physical mixtures and solid dispersions were prepared and characterized using several techniques (X-ray diffraction differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, laser diffraction, Fourier transform infrared and Raman spectroscopies). Solubility of these formulations evidenced that the solubility of praziquantel-calcium carbonate interaction product increased in physiological media. In vitro dissolution tests showed that the interaction product increased the dissolution rate of the drug in acidic medium. Theoretical models were studied to understand this experimental behavior. Cytotoxicity and cell cycle studies were performed, showing that praziquantel-calcium carbonate physical mixture and interaction product were biocompatible with the HTC116 cells, because it did not produce a decrease in cell viability or alterations in the cell cycle.

DEVELOPMENT OF SOLID DISPERSION TABLET OF CARVEDILOL TO IMPROVE SOLUBILITY

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 54-59
Author(s):  
S. S Shelake ◽  
◽  
R. G Gaikwad ◽  
S Patil ◽  
F. I. Mevekari ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Media ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
Water Soluble Drugs ◽  
Ft Ir

Crystalline state compounds are typically dissolution rate limited and dissolution rate is directly proportional to the solubility for BCS class II or class IV compounds. Solid dispersions are one of the most promising strategies to improve the oral bioavailability poorly water soluble drugs. The purpose of this study was to increase solubility of carvedilol by solid dispersion (SDs) technique with Poloxamer (PXM) 407 in aqueous media. The carvedilol- PXM 407 solid dispersion was prepared by solvent evaporation, kneading and melting method. It was characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), Fourier transformation infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM) and in vitro dissolution studies. The prepared solid dispersion were found to have higher dissolution rates as compared to intact carvedilol. During formulation of solid dispersion crystalline to amorphous transition has been observed.

scholarly journals DEVELOPMENT AND IN VITRO DISSOLUTION STUDY OF BINARY AND TERNARY SOLID DISPERSIONS OF ACECLOFENAC

2019 ◽  
Author(s):  
Md. Shahidul Islam ◽  
Rasheda Akter Lucky
Keyword(s):  
Polyethylene Glycol ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Weight Ratio ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Peg 6000

The poor aqueous solubility of the drug exhibits in variable dissolution rate and hence poor bioavailability. Aceclofenac is poorly water soluble drug. The aim of the present study was to improve the water solubility and the dissolution rate of Aceclofenac by solid dispersion technique using different water soluble polymers. The term solid dispersions refer to the dispersions of one or more active ingredients in an inert carrier or matrix at solid state. In this study, binary solid dispersion of Aceclofenac were prepared by fusion method using Polyethylene glycol 6000 (PEG 6000), Polyethylene glycol 4000 (PEG 4000), Poloxamer as carrier. Different drug-carrier weight ratio was used for this study. The effect of the carrier on the solubility and in-vitro dissolution were studied. It was found the drug was released 26.86% after 5 minutes and only 40.19% within 60 mins from active Aceclofenac on the other hand the release pattern of Aceclofenac from the binary SD formulation containing PEG 6000 in 1:5 ratio (Formulation coding: A5) showed the best result in comparison of other binary and ternary SD formulations which was 62.29% after 5 min and 83.03% within 60 mins. The hydrophilic polymers used for the preparation of solid dispersion are showed significant increase in the solubility of Aceclofenac.

scholarly journals Effect of Amphiphilic Graft Co-Polymer Carrier on Solubility and Dissolution Enhancement of Ambrisentan

2021 ◽  
pp. 329-338
Author(s):  
Rahul Radke ◽  
Neetesh K. Jain
Keyword(s):  
Ftir Spectroscopy ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Dissolution Enhancement ◽  
Polymer Carrier ◽  
Dissolution Study

Aim: Ambrisentan is a endothelin type A selective receptor antagonist used in the management of pulmonary arterial hypertension. Ambrisentan is BCS Class II drug haves very poor solubility in water and shows incomplete absorption after oral administration. The present work was aimed to study the effect of amphiphilic graft co-polymer carrier on enhancement of solubility and dissolution rate of poorly water soluble drug ambrisentan. To improve the aqueous solubility of ambrisentan solid dispersion was formulated by using novel carrier amphiphilic graft co-polymer (Soluplus® ). Materials and Methods: Solid dispersion was prepared by kneading technique by utilizing various ratios of carrier. Obtained solid dispersions ware evaluated for solubility, percentage yield, drug content and in vitro dissolution study. Powder characterization was performed by infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Results: FTIR spectroscopy shows no interaction between drug and polymer. DSC study showed that endothermic peak of drug was completely disappeared in Solid dispersion suggesting complete miscibility of drug in Soluplus®. XRD study suggest the conversion of crystalline ambrisentan in to amorphous form. All solid dispersions prepared with Soluplus® as a carrier showed increase in solubility. Solubility of ambrisentan was found to be increased 7.17 fold in optimized SD formulation ASD5. In vitro dissolution study showed the faster drug release from SD formulation compare to its pure form. All solid dispersion formulation’s release more than 50% of drug in first 10 min. Conclusion: This study conclude that the preparation of amphiphilic graft co-polymer based solid dispersion prepared by kneading technique is found to be useful in enhancement the solubility and dissolution rate of ambrisentan.

scholarly journals FORMULATION AND EVALUATION OF LIQUISOLID COMPACTS OF LORNOXICAM

2019 ◽  
pp. 33-37
Author(s):  
Asma Azaruddin Mokashi ◽  
SNEHALATA L. GAIKWAD
Keyword(s):  
Dissolution Rate ◽  
Drug Concentration ◽  
In Vitro Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Scanning Calorimetry ◽  
Spectra Analysis ◽  
X Ray ◽  
Liquisolid Compacts

Objective: Objective of the present investigation was to enhance the solubility and dissolution rate of poorly water-soluble drug lornoxicam using liquisolid technique with comparative determination of in vitro release profile of liquisolid compacts and conventional formulation of lornoxicam. Methods: Formulation was prepared by a liquisolid technique using different drug concentration in a liquid vehicle and different carrier/coating ratio. Prepared liquisolid compact was evaluated for Fourier transform infrared (FTIR) spectra analysis, differential scanning calorimetry (DSC), X-ray diffraction (P-XRD), scanning electron microscopy (SEM) and in vitro dissolution study. Results: The result showed that liquisolid compacts of lornoxicam displayed significantly higher drug release rate as compared to pure drug and conventional tablet prepared. The results of both DSC and X-ray crystallography indicated loss of crystallinity of the drug upon formulated into the liquisolid compact. Conclusion: Dissolution rate of the drug from liquisolid compacts was affected by changing the drug concentration and excipient ratio. The liquisolid technique appeared to be a promising approach for improving the dissolution of poorly soluble drug lornoxicam.

scholarly journals FORMULATION AND EVALUATION OF TELMISARTAN SOLID DISPERSIONS USING ENTADA SCANDENS SEED STARCH AND POLOXAMER-188 AS SUPERDISINTEGRANTS

2018 ◽  
Vol 11 (9) ◽  
pp. 474
Author(s):  
Venkatarao Mannem ◽  
Vidyadhara Suryadevara ◽  
Sandeep Doppalapudi
Keyword(s):  
Physicochemical Properties ◽  
Sodium Hydroxide ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Differential Scanning Calorimetric ◽  
Poloxamer 188

Objective: The current research focuses on solubility enhancement of poorly water-soluble drug telmisartan, using novel superdisintegrants such as Entada scandens seed starch and Poloxamer-188. Starches yielded from plants are pharmaceutically useful as binders, diluents, disintegrants, and lubricants.Methods: Starches were extracted from E. scandens seed powder using alkali method (sodium hydroxide at 0.1%, 0.25%, and 0.5% concentrations) and water. These starches were subjected for the evaluation of various physicochemical properties and phytochemical tests.Results: The phytochemical tests revealed the presence of only starch in all the extracts. Of all the starches, the starch prepared from 0.5% sodium hydroxide (ESS4) showed best physicochemical properties. Solid dispersions were prepared using telmisartan, poloxamer-188, and starch (ESS4) in various concentrations using fusion technique. Various pre-formulation parameters were evaluated. From in vitro dissolution studies, it was observed that the solid dispersion formulation TP7 containing telmisartan and poloxamer-188 in 1:4 ratios showed better dissolution rate. Solid dispersion TPS7 containing TP7 formulation and 15% w/w of alkali extracted starch showed faster disintegration and enhanced dissolution rate than the solid dispersions prepared alone with poloxamer-188. Fourier transform infrared spectroscopy and differential scanning calorimetric studies for optimized formulations revealed that there were no major interactions between the drug and excipients. X-ray diffraction studies revealed the crystalline and amorphous nature of formulations.Conclusion: Thus, the solid dispersions prepared using E. scandens seed starch revealed the superdisintegrant property of starch. 

scholarly journals FABRICATION AND EVALUATION OF SOLID DISPERSION CONTAINING GLIBENCLAMIDE

2018 ◽  
Vol 11 (8) ◽  
pp. 158
Author(s):  
Nikita Sehgal ◽  
Vishal Gupta N ◽  
Gowda Dv ◽  
Sivadasu P
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Amorphous State ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Stability Studies ◽  
Scanning Calorimetry ◽  
Dsc Studies

 Objective: The aim of the present study was to increase the dissolution rate of glibenclamide (GLIB) by molecular dispersion of drug in the polymeric matrix of Pluronic F-127.Methods: GLIB-loaded solid dispersions were formulated by fusion method. The formulated solid dispersions were characterized for scanning electron microscopy (SEM), X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and evaluated for percentage yield, drug content, solubility, and in vitro dissolution profile, and stability studies were conducted as per International Conference on Harmonisation guidelines Q1A in stability chamber, both at intermediate and accelerated conditions.Results: Both XRD and DSC studies suggested that crystalline GLIB was converted to amorphous form after loading into carrier. SEM studies revealed that the prepared solid dispersions were in the form of irregular particles with the absence of crystalline material. Due to this conversion of crystalline to amorphous state, formulated solid dispersions had shown improved dissolution rate profile of GLIB and stability studies suggested that formulated solid dispersions showed no significant changes in appearance and also in drug content.Conclusion: Thus, from the obtained results, it can be concluded that dissolution profile of GLIB can be improved by formulating as solid dispersion.

Formulation, Physicochemical Evaluation, and Dissolution Studies of Carbamazepine Solid Dispersions

1970 ◽  
Vol 5 (3) ◽  
pp. 1790-1807
Author(s):  
M. Mohan Varma ◽  
Razia Begum S K
Keyword(s):  
Dissolution Rate ◽  
Marked Reduction ◽  
Solid Dispersions ◽  
Thermo Gravimetric Analysis ◽  
Research Work ◽  
In Vitro Dissolution ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Disintegration Time

Carbamazepine is a water-insoluble antiepileptic drug. Being a BCS class-II drug, its absorption is dissolution rate limited. Solid dispersions were prepared to enhance the dissolution rate of the drug. Crospovidone and croscarmellose sodium were used as the hydrophilic carriers. Solid dispersions showed a remarkable enhancement in the dissolution rate of the drug. In the present research work, the solid dispersions were formulated in to fast dissolving tablets. The prepared tablets were evaluated for hardness, friability, drug content, disintegration time and the in vitro dissolution rate. The solid dispersions were characterized by Fourier Transform Infrared Spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA). The DSC study revealed a marked reduction in the crystallinity of the drug. The faster dissolution rate of the solid dispersion is attributed to a marked reduction in the crystallinity of the drug. The FTIR and DSC studies demonstrated the absence of drug-polymer interaction. The formulated tablet (F2) achieved a 7 fold faster dissolution rate compared to the marketed tablet.

MICROWAVE GENERATED SOLID DISPERSION OF REPAGLINIDE WITH NOVEL NATURAL CARRIER MODIFIED GUM KONDAGOGU

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (05) ◽  
pp. 5-11
Author(s):  
Z. L Ramvallabh ◽  
◽  
B. S Baburao
Keyword(s):  
Dissolution Rate ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Microwave Method ◽  
Promising Alternative ◽  
Water Soluble Drug ◽  
Gum Kondagogu ◽  
Poorly Water Soluble Drug

The influence of microwave technology and modified gum kondagogu (MGK) on the in vitro dissolution rate of a poorly - water soluble drug repaglinide (RG) was studied. Solid dispersions were prepared using gum kondagogu (GK) & MGK as a carrier by microwave method. Microwave generated solid dispersions with MGK exhibited remarkable improvement in solubility and dissolution rate compared to that of pure RG. In conclusion, microwave method together with MGK as a potential carrier could be considered as simple, efficient and solvent free promising alternative method to prepare solid dispersions.

Influence of β-Cyclodextrin and Hydroxypropyl-β-Cyclodextrin on Enhancement of Solubility and Dissolution of Isradipine

2017 ◽  
Vol 10 (3) ◽  
pp. 3752-3757
Author(s):  
Narendar D ◽  
Ettireddy S
Keyword(s):  
Inclusion Complex ◽  
Dissolution Rate ◽  
Solid Dispersions ◽  
Physical Stability ◽  
Molecular Complexes ◽  
In Vitro Dissolution ◽  
Molar Ratio ◽  
Phase Solubility ◽  
Cyclodextrin Complexation

The content of this investigation was to study the influence of β-cyclodextrin and hydroxy propyl-β-cyclodextrin complexation on enhancement of solubility and dissolution rate of isradipine. Based on preliminary phase solubility studies, solid complexes prepared by freeze drying method in 1:1 molar ratio were selected and characterized by DSC for confirmation of complex formation. Prepared solid dispersions were evaluated for drug content, solubility and in vitro dissolution. The physical stability of optimized formulation was studied at refrigerated and room temperature for 2 months. Solid state characterization of optimized complex performed by DSC and XRD studies.  Dissolution rate of isradipine was increased compared with pure drug and more with HP-β-CD inclusion complex than β-CD. DSC and XRD analyzes that drug was in amorphous form, when the drug was incorporated as isradipine β-CD and HP-β-CD inclusion complex. Stability studies resulted in low or no variations in the percentage of complexation efficiency suggesting good stability of molecular complexes. The results conclusively demonstrated that the enhancement of solubility and dissolution rate of isradipine by drug-cyclodextrin complexation was achieved.   

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Sign in / Sign up

Export Citation Format

Share Document